From: Mel Gorman <mgorman@suse.de>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>,
Valdis Kletnieks <Valdis.Kletnieks@vt.edu>,
Rik van Riel <riel@redhat.com>,
Zlatko Calusic <zcalusic@bitsync.net>,
Johannes Weiner <hannes@cmpxchg.org>,
dormando <dormando@rydia.net>,
Satoru Moriya <satoru.moriya@hds.com>,
Michal Hocko <mhocko@suse.cz>, Linux-MM <linux-mm@kvack.org>,
LKML <linux-kernel@vger.kernel.org>, Mel Gorman <mgorman@suse.de>
Subject: [PATCH 10/10] mm: vmscan: Move logic from balance_pgdat() to kswapd_shrink_zone()
Date: Tue, 9 Apr 2013 12:07:05 +0100 [thread overview]
Message-ID: <1365505625-9460-11-git-send-email-mgorman@suse.de> (raw)
In-Reply-To: <1365505625-9460-1-git-send-email-mgorman@suse.de>
balance_pgdat() is very long and some of the logic can and should
be internal to kswapd_shrink_zone(). Move it so the flow of
balance_pgdat() is marginally easier to follow.
Signed-off-by: Mel Gorman <mgorman@suse.de>
---
mm/vmscan.c | 112 +++++++++++++++++++++++++++++-------------------------------
1 file changed, 55 insertions(+), 57 deletions(-)
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 6cd6435..00024d8 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2684,19 +2684,54 @@ static bool prepare_kswapd_sleep(pg_data_t *pgdat, int order, long remaining,
* This is used to determine if the scanning priority needs to be raised.
*/
static bool kswapd_shrink_zone(struct zone *zone,
+ int classzone_idx,
struct scan_control *sc,
unsigned long lru_pages,
bool shrinking_slab,
unsigned long *nr_attempted)
{
+ int testorder = sc->order;
unsigned long nr_slab = 0;
+ unsigned long balance_gap;
struct reclaim_state *reclaim_state = current->reclaim_state;
struct shrink_control shrink = {
.gfp_mask = sc->gfp_mask,
};
+ bool lowmem_pressure;
/* Reclaim above the high watermark. */
sc->nr_to_reclaim = max(SWAP_CLUSTER_MAX, high_wmark_pages(zone));
+
+ /*
+ * Kswapd reclaims only single pages with compaction enabled. Trying
+ * too hard to reclaim until contiguous free pages have become
+ * available can hurt performance by evicting too much useful data
+ * from memory. Do not reclaim more than needed for compaction.
+ */
+ if (IS_ENABLED(CONFIG_COMPACTION) && sc->order &&
+ compaction_suitable(zone, sc->order) !=
+ COMPACT_SKIPPED)
+ testorder = 0;
+
+ /*
+ * We put equal pressure on every zone, unless one zone has way too
+ * many pages free already. The "too many pages" is defined as the
+ * high wmark plus a "gap" where the gap is either the low
+ * watermark or 1% of the zone, whichever is smaller.
+ */
+ balance_gap = min(low_wmark_pages(zone),
+ (zone->managed_pages + KSWAPD_ZONE_BALANCE_GAP_RATIO-1) /
+ KSWAPD_ZONE_BALANCE_GAP_RATIO);
+
+ /*
+ * If there is no low memory pressure or the zone is balanced then no
+ * reclaim is necessary
+ */
+ lowmem_pressure = (buffer_heads_over_limit && is_highmem(zone));
+ if (!lowmem_pressure && zone_balanced(zone, testorder,
+ balance_gap, classzone_idx))
+ return true;
+
shrink_zone(zone, sc);
/*
@@ -2717,6 +2752,18 @@ static bool kswapd_shrink_zone(struct zone *zone,
zone_clear_flag(zone, ZONE_WRITEBACK);
+ /*
+ * If a zone reaches its high watermark, consider it to be no longer
+ * congested. It's possible there are dirty pages backed by congested
+ * BDIs but as pressure is relieved, speculatively avoid congestion
+ * waits.
+ */
+ if (!zone->all_unreclaimable &&
+ zone_balanced(zone, testorder, 0, classzone_idx)) {
+ zone_clear_flag(zone, ZONE_CONGESTED);
+ zone_clear_flag(zone, ZONE_TAIL_LRU_DIRTY);
+ }
+
return sc->nr_scanned >= sc->nr_to_reclaim;
}
@@ -2853,8 +2900,6 @@ static unsigned long balance_pgdat(pg_data_t *pgdat, int order,
*/
for (i = 0; i <= end_zone; i++) {
struct zone *zone = pgdat->node_zones + i;
- int testorder;
- unsigned long balance_gap;
if (!populated_zone(zone))
continue;
@@ -2875,62 +2920,15 @@ static unsigned long balance_pgdat(pg_data_t *pgdat, int order,
sc.nr_reclaimed += nr_soft_reclaimed;
/*
- * We put equal pressure on every zone, unless
- * one zone has way too many pages free
- * already. The "too many pages" is defined
- * as the high wmark plus a "gap" where the
- * gap is either the low watermark or 1%
- * of the zone, whichever is smaller.
- */
- balance_gap = min(low_wmark_pages(zone),
- (zone->managed_pages +
- KSWAPD_ZONE_BALANCE_GAP_RATIO-1) /
- KSWAPD_ZONE_BALANCE_GAP_RATIO);
- /*
- * Kswapd reclaims only single pages with compaction
- * enabled. Trying too hard to reclaim until contiguous
- * free pages have become available can hurt performance
- * by evicting too much useful data from memory.
- * Do not reclaim more than needed for compaction.
+ * There should be no need to raise the scanning
+ * priority if enough pages are already being scanned
+ * that that high watermark would be met at 100%
+ * efficiency.
*/
- testorder = order;
- if (IS_ENABLED(CONFIG_COMPACTION) && order &&
- compaction_suitable(zone, order) !=
- COMPACT_SKIPPED)
- testorder = 0;
-
- if ((buffer_heads_over_limit && is_highmem_idx(i)) ||
- !zone_balanced(zone, testorder,
- balance_gap, end_zone)) {
- /*
- * There should be no need to raise the
- * scanning priority if enough pages are
- * already being scanned that high
- * watermark would be met at 100% efficiency.
- */
- if (kswapd_shrink_zone(zone, &sc,
- lru_pages, shrinking_slab,
- &nr_attempted))
- raise_priority = false;
- }
-
- if (zone->all_unreclaimable) {
- if (end_zone && end_zone == i)
- end_zone--;
- continue;
- }
-
- if (zone_balanced(zone, testorder, 0, end_zone))
- /*
- * If a zone reaches its high watermark,
- * consider it to be no longer congested. It's
- * possible there are dirty pages backed by
- * congested BDIs but as pressure is relieved,
- * speculatively avoid congestion waits
- * or writing pages from kswapd context.
- */
- zone_clear_flag(zone, ZONE_CONGESTED);
- zone_clear_flag(zone, ZONE_TAIL_LRU_DIRTY);
+ if (kswapd_shrink_zone(zone, end_zone, &sc,
+ lru_pages, shrinking_slab,
+ &nr_attempted))
+ raise_priority = false;
}
/*
--
1.8.1.4
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2013-04-09 11:18 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-09 11:06 [PATCH 0/10] Reduce system disruption due to kswapd V2 Mel Gorman
2013-04-09 11:06 ` [PATCH 01/10] mm: vmscan: Limit the number of pages kswapd reclaims at each priority Mel Gorman
2013-04-09 13:27 ` Michal Hocko
2013-04-10 6:47 ` Kamezawa Hiroyuki
2013-04-09 11:06 ` [PATCH 02/10] mm: vmscan: Obey proportional scanning requirements for kswapd Mel Gorman
2013-04-10 7:16 ` Kamezawa Hiroyuki
2013-04-10 14:08 ` Mel Gorman
2013-04-11 0:14 ` Kamezawa Hiroyuki
2013-04-11 9:09 ` Mel Gorman
2013-04-09 11:06 ` [PATCH 03/10] mm: vmscan: Flatten kswapd priority loop Mel Gorman
2013-04-10 7:47 ` Kamezawa Hiroyuki
2013-04-10 13:29 ` Mel Gorman
2013-04-12 2:45 ` Rik van Riel
2013-04-09 11:06 ` [PATCH 04/10] mm: vmscan: Decide whether to compact the pgdat based on reclaim progress Mel Gorman
2013-04-10 8:05 ` Kamezawa Hiroyuki
2013-04-10 13:57 ` Mel Gorman
2013-04-12 2:46 ` Rik van Riel
2013-04-09 11:07 ` [PATCH 05/10] mm: vmscan: Do not allow kswapd to scan at maximum priority Mel Gorman
2013-04-09 11:07 ` [PATCH 06/10] mm: vmscan: Have kswapd writeback pages based on dirty pages encountered, not priority Mel Gorman
2013-04-12 2:51 ` Rik van Riel
2013-04-09 11:07 ` [PATCH 07/10] mm: vmscan: Block kswapd if it is encountering pages under writeback Mel Gorman
2013-04-12 2:54 ` Rik van Riel
2013-04-09 11:07 ` [PATCH 08/10] mm: vmscan: Have kswapd shrink slab only once per priority Mel Gorman
2013-04-09 11:07 ` [PATCH 09/10] mm: vmscan: Check if kswapd should writepage once per pgdat scan Mel Gorman
2013-04-09 11:07 ` Mel Gorman [this message]
2013-04-12 2:56 ` [PATCH 10/10] mm: vmscan: Move logic from balance_pgdat() to kswapd_shrink_zone() Rik van Riel
2013-04-09 17:27 ` [PATCH 0/10] Reduce system disruption due to kswapd V2 Christoph Lameter
2013-04-10 14:14 ` Mel Gorman
2013-04-10 22:28 ` dormando
2013-04-10 23:46 ` KOSAKI Motohiro
2013-04-11 9:10 ` Mel Gorman
2013-04-11 20:13 ` Michal Hocko
2013-04-11 20:55 ` Zlatko Calusic
2013-04-12 19:40 ` Mel Gorman
2013-04-12 19:52 ` Mel Gorman
2013-04-12 20:07 ` Zlatko Calusic
2013-04-12 20:41 ` Mel Gorman
2013-04-12 21:14 ` Zlatko Calusic
2013-04-22 6:37 ` Zlatko Calusic
2013-04-22 6:43 ` Simon Jeons
2013-04-22 6:54 ` Zlatko Calusic
2013-04-22 7:12 ` Simon Jeons
-- strict thread matches above, loose matches on Subject: below --
2013-04-11 19:57 [PATCH 0/10] Reduce system disruption due to kswapd V3 Mel Gorman
2013-04-11 19:57 ` [PATCH 10/10] mm: vmscan: Move logic from balance_pgdat() to kswapd_shrink_zone() Mel Gorman
2013-04-18 16:56 ` Johannes Weiner
2013-03-17 13:04 [RFC PATCH 0/8] Reduce system disruption due to kswapd Mel Gorman
2013-03-17 13:04 ` [PATCH 10/10] mm: vmscan: Move logic from balance_pgdat() to kswapd_shrink_zone() Mel Gorman
2013-03-17 14:55 ` Andi Kleen
2013-03-17 15:25 ` Mel Gorman
2013-03-21 17:18 ` Michal Hocko
2013-03-21 18:13 ` Mel Gorman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1365505625-9460-11-git-send-email-mgorman@suse.de \
--to=mgorman@suse.de \
--cc=Valdis.Kletnieks@vt.edu \
--cc=akpm@linux-foundation.org \
--cc=dormando@rydia.net \
--cc=hannes@cmpxchg.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@suse.cz \
--cc=riel@redhat.com \
--cc=satoru.moriya@hds.com \
--cc=zcalusic@bitsync.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).