From: Steve Capper <steve.capper@linaro.org>
To: linux-mm@kvack.org, x86@kernel.org, linux-arch@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Michal Hocko <mhocko@suse.cz>, Ken Chen <kenchen@google.com>,
Mel Gorman <mgorman@suse.de>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
patches@linaro.org, Steve Capper <steve.capper@linaro.org>
Subject: [RFC PATCH v2 03/11] mm: hugetlb: Copy general hugetlb code from x86 to mm.
Date: Wed, 8 May 2013 10:52:35 +0100 [thread overview]
Message-ID: <1368006763-30774-4-git-send-email-steve.capper@linaro.org> (raw)
In-Reply-To: <1368006763-30774-1-git-send-email-steve.capper@linaro.org>
The huge_pte_alloc, huge_pte_offset and follow_huge_p[mu]d
functions in x86/mm/hugetlbpage.c do not rely on any architecture
specific knowledge other than the fact that pmds and puds can be
treated as huge ptes.
To allow other architectures to use this code (and reduce the need
for code duplication), this patch copies these functions into mm
and provides a config flag to activate them:
CONFIG_ARCH_WANT_GENERAL_HUGETLB
If CONFIG_ARCH_WANT_HUGE_PMD_SHARE is also active then the
huge_pmd_share code will be called by huge_pte_alloc (othewise we
call pmd_alloc and skip the sharing code).
Signed-off-by: Steve Capper <steve.capper@linaro.org>
---
mm/hugetlb.c | 97 ++++++++++++++++++++++++++++++++++++++++++++++++++++++------
1 file changed, 88 insertions(+), 9 deletions(-)
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 41179b0..e1dc5ae 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2915,15 +2915,6 @@ out_mutex:
return ret;
}
-/* Can be overriden by architectures */
-__attribute__((weak)) struct page *
-follow_huge_pud(struct mm_struct *mm, unsigned long address,
- pud_t *pud, int write)
-{
- BUG();
- return NULL;
-}
-
long follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma,
struct page **pages, struct vm_area_struct **vmas,
unsigned long *position, unsigned long *nr_pages,
@@ -3262,8 +3253,96 @@ int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
*addr = ALIGN(*addr, HPAGE_SIZE * PTRS_PER_PTE) - HPAGE_SIZE;
return 1;
}
+#define want_pmd_share() (1)
+#else /* !CONFIG_ARCH_WANT_HUGE_PMD_SHARE */
+pte_t *huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud)
+{
+ return NULL;
+}
+#define want_pmd_share() (0)
#endif /* CONFIG_ARCH_WANT_HUGE_PMD_SHARE */
+#ifdef CONFIG_ARCH_WANT_GENERAL_HUGETLB
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+ unsigned long addr, unsigned long sz)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pte_t *pte = NULL;
+
+ pgd = pgd_offset(mm, addr);
+ pud = pud_alloc(mm, pgd, addr);
+ if (pud) {
+ if (sz == PUD_SIZE) {
+ pte = (pte_t *)pud;
+ } else {
+ BUG_ON(sz != PMD_SIZE);
+ if (want_pmd_share() && pud_none(*pud))
+ pte = huge_pmd_share(mm, addr, pud);
+ else
+ pte = (pte_t *)pmd_alloc(mm, pud, addr);
+ }
+ }
+ BUG_ON(pte && !pte_none(*pte) && !pte_huge(*pte));
+
+ return pte;
+}
+
+pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd = NULL;
+
+ pgd = pgd_offset(mm, addr);
+ if (pgd_present(*pgd)) {
+ pud = pud_offset(pgd, addr);
+ if (pud_present(*pud)) {
+ if (pud_large(*pud))
+ return (pte_t *)pud;
+ pmd = pmd_offset(pud, addr);
+ }
+ }
+ return (pte_t *) pmd;
+}
+
+struct page *
+follow_huge_pmd(struct mm_struct *mm, unsigned long address,
+ pmd_t *pmd, int write)
+{
+ struct page *page;
+
+ page = pte_page(*(pte_t *)pmd);
+ if (page)
+ page += ((address & ~PMD_MASK) >> PAGE_SHIFT);
+ return page;
+}
+
+struct page *
+follow_huge_pud(struct mm_struct *mm, unsigned long address,
+ pud_t *pud, int write)
+{
+ struct page *page;
+
+ page = pte_page(*(pte_t *)pud);
+ if (page)
+ page += ((address & ~PUD_MASK) >> PAGE_SHIFT);
+ return page;
+}
+
+#else /* !CONFIG_ARCH_WANT_GENERAL_HUGETLB */
+
+/* Can be overriden by architectures */
+__attribute__((weak)) struct page *
+follow_huge_pud(struct mm_struct *mm, unsigned long address,
+ pud_t *pud, int write)
+{
+ BUG();
+ return NULL;
+}
+
+#endif /* CONFIG_ARCH_WANT_GENERAL_HUGETLB */
+
#ifdef CONFIG_MEMORY_FAILURE
/* Should be called in hugetlb_lock */
--
1.8.1.4
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2013-05-08 9:53 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-08 9:52 [RFC PATCH v2 00/11] HugeTLB and THP support for ARM64 Steve Capper
2013-05-08 9:52 ` [RFC PATCH v2 01/11] mm: hugetlb: Copy huge_pmd_share from x86 to mm Steve Capper
2013-05-08 9:52 ` [RFC PATCH v2 02/11] x86: mm: Remove x86 version of huge_pmd_share Steve Capper
2013-05-08 9:52 ` Steve Capper [this message]
2013-05-08 9:52 ` [RFC PATCH v2 04/11] x86: mm: Remove general hugetlb code from x86 Steve Capper
2013-05-08 9:52 ` [RFC PATCH v2 05/11] mm: thp: Correct the HPAGE_PMD_ORDER check Steve Capper
2013-05-08 12:44 ` Kirill A. Shutemov
2013-05-08 12:03 ` Steve Capper
2013-05-08 9:52 ` [RFC PATCH v2 06/11] ARM64: mm: Restore memblock limit when map_mem finished Steve Capper
2013-05-16 13:52 ` Catalin Marinas
2013-05-08 9:52 ` [RFC PATCH v2 07/11] ARM64: mm: Make PAGE_NONE pages read only and no-execute Steve Capper
2013-05-08 16:43 ` Will Deacon
2013-05-09 8:27 ` Steve Capper
2013-05-08 9:52 ` [RFC PATCH v2 08/11] ARM64: mm: Swap PTE_FILE and PTE_PROT_NONE bits Steve Capper
2013-05-08 16:17 ` Christopher Covington
2013-05-09 8:15 ` Steve Capper
2013-05-08 16:40 ` Will Deacon
2013-05-09 8:22 ` Steve Capper
2013-05-16 14:58 ` Catalin Marinas
2013-05-08 9:52 ` [RFC PATCH v2 09/11] ARM64: mm: HugeTLB support Steve Capper
2013-05-16 14:32 ` Catalin Marinas
2013-05-17 8:41 ` Steve Capper
2013-05-08 9:52 ` [RFC PATCH v2 10/11] ARM64: mm: Raise MAX_ORDER for 64KB pages and THP Steve Capper
2013-05-16 14:59 ` Catalin Marinas
2013-05-08 9:52 ` [RFC PATCH v2 11/11] ARM64: mm: THP support Steve Capper
2013-05-16 15:01 ` Catalin Marinas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1368006763-30774-4-git-send-email-steve.capper@linaro.org \
--to=steve.capper@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=kenchen@google.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@suse.de \
--cc=mhocko@suse.cz \
--cc=patches@linaro.org \
--cc=will.deacon@arm.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).