From: Steve Capper <steve.capper@linaro.org>
To: linux-mm@kvack.org, x86@kernel.org, linux-arch@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Michal Hocko <mhocko@suse.cz>, Ken Chen <kenchen@google.com>,
Mel Gorman <mgorman@suse.de>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
patches@linaro.org, Steve Capper <steve.capper@linaro.org>
Subject: [RFC PATCH v2 04/11] x86: mm: Remove general hugetlb code from x86.
Date: Wed, 8 May 2013 10:52:36 +0100 [thread overview]
Message-ID: <1368006763-30774-5-git-send-email-steve.capper@linaro.org> (raw)
In-Reply-To: <1368006763-30774-1-git-send-email-steve.capper@linaro.org>
huge_pte_alloc, huge_pte_offset and follow_huge_p[mu]d have
already been copied over to mm.
This patch removes the x86 copies of these functions and activates
the general ones by enabling:
CONFIG_ARCH_WANT_GENERAL_HUGETLB
Signed-off-by: Steve Capper <steve.capper@linaro.org>
---
arch/x86/Kconfig | 3 +++
arch/x86/mm/hugetlbpage.c | 67 -----------------------------------------------
2 files changed, 3 insertions(+), 67 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 60e3c402..db1ff87 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -215,6 +215,9 @@ config ARCH_SUSPEND_POSSIBLE
config ARCH_WANT_HUGE_PMD_SHARE
def_bool y
+config ARCH_WANT_GENERAL_HUGETLB
+ def_bool y
+
config ZONE_DMA32
bool
default X86_64
diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index 7e522a3..7e73e8c 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -16,49 +16,6 @@
#include <asm/tlbflush.h>
#include <asm/pgalloc.h>
-pte_t *huge_pte_alloc(struct mm_struct *mm,
- unsigned long addr, unsigned long sz)
-{
- pgd_t *pgd;
- pud_t *pud;
- pte_t *pte = NULL;
-
- pgd = pgd_offset(mm, addr);
- pud = pud_alloc(mm, pgd, addr);
- if (pud) {
- if (sz == PUD_SIZE) {
- pte = (pte_t *)pud;
- } else {
- BUG_ON(sz != PMD_SIZE);
- if (pud_none(*pud))
- pte = huge_pmd_share(mm, addr, pud);
- else
- pte = (pte_t *)pmd_alloc(mm, pud, addr);
- }
- }
- BUG_ON(pte && !pte_none(*pte) && !pte_huge(*pte));
-
- return pte;
-}
-
-pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
-{
- pgd_t *pgd;
- pud_t *pud;
- pmd_t *pmd = NULL;
-
- pgd = pgd_offset(mm, addr);
- if (pgd_present(*pgd)) {
- pud = pud_offset(pgd, addr);
- if (pud_present(*pud)) {
- if (pud_large(*pud))
- return (pte_t *)pud;
- pmd = pmd_offset(pud, addr);
- }
- }
- return (pte_t *) pmd;
-}
-
#if 0 /* This is just for testing */
struct page *
follow_huge_addr(struct mm_struct *mm, unsigned long address, int write)
@@ -120,30 +77,6 @@ int pud_huge(pud_t pud)
return !!(pud_val(pud) & _PAGE_PSE);
}
-struct page *
-follow_huge_pmd(struct mm_struct *mm, unsigned long address,
- pmd_t *pmd, int write)
-{
- struct page *page;
-
- page = pte_page(*(pte_t *)pmd);
- if (page)
- page += ((address & ~PMD_MASK) >> PAGE_SHIFT);
- return page;
-}
-
-struct page *
-follow_huge_pud(struct mm_struct *mm, unsigned long address,
- pud_t *pud, int write)
-{
- struct page *page;
-
- page = pte_page(*(pte_t *)pud);
- if (page)
- page += ((address & ~PUD_MASK) >> PAGE_SHIFT);
- return page;
-}
-
#endif
/* x86_64 also uses this file */
--
1.8.1.4
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2013-05-08 9:53 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-08 9:52 [RFC PATCH v2 00/11] HugeTLB and THP support for ARM64 Steve Capper
2013-05-08 9:52 ` [RFC PATCH v2 01/11] mm: hugetlb: Copy huge_pmd_share from x86 to mm Steve Capper
2013-05-08 9:52 ` [RFC PATCH v2 02/11] x86: mm: Remove x86 version of huge_pmd_share Steve Capper
2013-05-08 9:52 ` [RFC PATCH v2 03/11] mm: hugetlb: Copy general hugetlb code from x86 to mm Steve Capper
2013-05-08 9:52 ` Steve Capper [this message]
2013-05-08 9:52 ` [RFC PATCH v2 05/11] mm: thp: Correct the HPAGE_PMD_ORDER check Steve Capper
2013-05-08 12:44 ` Kirill A. Shutemov
2013-05-08 12:03 ` Steve Capper
2013-05-08 9:52 ` [RFC PATCH v2 06/11] ARM64: mm: Restore memblock limit when map_mem finished Steve Capper
2013-05-16 13:52 ` Catalin Marinas
2013-05-08 9:52 ` [RFC PATCH v2 07/11] ARM64: mm: Make PAGE_NONE pages read only and no-execute Steve Capper
2013-05-08 16:43 ` Will Deacon
2013-05-09 8:27 ` Steve Capper
2013-05-08 9:52 ` [RFC PATCH v2 08/11] ARM64: mm: Swap PTE_FILE and PTE_PROT_NONE bits Steve Capper
2013-05-08 16:17 ` Christopher Covington
2013-05-09 8:15 ` Steve Capper
2013-05-08 16:40 ` Will Deacon
2013-05-09 8:22 ` Steve Capper
2013-05-16 14:58 ` Catalin Marinas
2013-05-08 9:52 ` [RFC PATCH v2 09/11] ARM64: mm: HugeTLB support Steve Capper
2013-05-16 14:32 ` Catalin Marinas
2013-05-17 8:41 ` Steve Capper
2013-05-08 9:52 ` [RFC PATCH v2 10/11] ARM64: mm: Raise MAX_ORDER for 64KB pages and THP Steve Capper
2013-05-16 14:59 ` Catalin Marinas
2013-05-08 9:52 ` [RFC PATCH v2 11/11] ARM64: mm: THP support Steve Capper
2013-05-16 15:01 ` Catalin Marinas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1368006763-30774-5-git-send-email-steve.capper@linaro.org \
--to=steve.capper@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=kenchen@google.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@suse.de \
--cc=mhocko@suse.cz \
--cc=patches@linaro.org \
--cc=will.deacon@arm.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).