From: Minchan Kim <minchan@kernel.org>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
Rik van Riel <riel@redhat.com>,
Michael Kerrisk <mtk.manpages@gmail.com>,
Dave Hansen <dave.hansen@intel.com>,
Namhyung Kim <namhyung@kernel.org>,
Minkyung Kim <minkyung88@lge.com>,
Minchan Kim <minchan@kernel.org>
Subject: [PATCH v5 6/7] mm: Support address range reclaim
Date: Thu, 9 May 2013 16:21:28 +0900 [thread overview]
Message-ID: <1368084089-24576-7-git-send-email-minchan@kernel.org> (raw)
In-Reply-To: <1368084089-24576-1-git-send-email-minchan@kernel.org>
This patch adds address range reclaim of a process.
The requirement is following as,
Like webkit1, it uses a address space for handling multi tabs.
IOW, it uses *one* process model so all tabs shares address space
of the process. In such scenario, per-process reclaim is rather
coarse-grained so this patch supports more fine-grained reclaim
for being able to reclaim target address range of the process.
For reclaim target range, you should use following format.
echo [addr] [size-byte] > /proc/pid/reclaim
The addr should be page-aligned.
So now reclaim konb's interface is following as.
echo file > /proc/pid/reclaim
reclaim file-backed pages only
echo anon > /proc/pid/reclaim
reclaim anonymous pages only
echo all > /proc/pid/reclaim
reclaim all pages
echo 0x100000 8K > /proc/pid/reclaim
reclaim pages in (0x100000 - 0x102000)
Signed-off-by: Minchan Kim <minchan@kernel.org>
---
fs/proc/task_mmu.c | 85 ++++++++++++++++++++++++++++++++++++++++++++----------
mm/Kconfig | 3 ++
2 files changed, 73 insertions(+), 15 deletions(-)
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index ccc97b1..61b6bde 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -12,6 +12,7 @@
#include <linux/swap.h>
#include <linux/swapops.h>
#include <linux/mm_inline.h>
+#include <linux/ctype.h>
#include <asm/elf.h>
#include <asm/uaccess.h>
@@ -1239,11 +1240,14 @@ static ssize_t reclaim_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
struct task_struct *task;
- char buffer[PROC_NUMBUF];
+ char buffer[200];
struct mm_struct *mm;
struct vm_area_struct *vma;
enum reclaim_type type;
char *type_buf;
+ struct mm_walk reclaim_walk = {};
+ unsigned long start = 0;
+ unsigned long end = 0;
memset(buffer, 0, sizeof(buffer));
if (count > sizeof(buffer) - 1)
@@ -1259,42 +1263,93 @@ static ssize_t reclaim_write(struct file *file, const char __user *buf,
type = RECLAIM_ANON;
else if (!strcmp(type_buf, "all"))
type = RECLAIM_ALL;
+ else if (isdigit(*type_buf))
+ type = RECLAIM_RANGE;
else
- return -EINVAL;
+ goto out_err;
+
+ if (type == RECLAIM_RANGE) {
+ char *token;
+ unsigned long long len, len_in, tmp;
+ token = strsep(&type_buf, " ");
+ if (!token)
+ goto out_err;
+ tmp = memparse(token, &token);
+ if (tmp & ~PAGE_MASK || tmp > ULONG_MAX)
+ goto out_err;
+ start = tmp;
+
+ token = strsep(&type_buf, " ");
+ if (!token)
+ goto out_err;
+ len_in = memparse(token, &token);
+ len = (len_in + ~PAGE_MASK) & PAGE_MASK;
+ if (len > ULONG_MAX)
+ goto out_err;
+ /*
+ * Check to see whether len was rounded up from small -ve
+ * to zero.
+ */
+ if (len_in && !len)
+ goto out_err;
+
+ end = start + len;
+ if (end < start)
+ goto out_err;
+ }
task = get_proc_task(file->f_path.dentry->d_inode);
if (!task)
return -ESRCH;
mm = get_task_mm(task);
- if (mm) {
- struct mm_walk reclaim_walk = {
- .pmd_entry = reclaim_pte_range,
- .mm = mm,
- };
+ if (!mm)
+ goto out;
- down_read(&mm->mmap_sem);
- for (vma = mm->mmap; vma; vma = vma->vm_next) {
- reclaim_walk.private = vma;
+ reclaim_walk.mm = mm;
+ reclaim_walk.pmd_entry = reclaim_pte_range;
+ down_read(&mm->mmap_sem);
+ if (type == RECLAIM_RANGE) {
+ vma = find_vma(mm, start);
+ while (vma) {
+ if (vma->vm_start > end)
+ break;
+ if (is_vm_hugetlb_page(vma))
+ continue;
+
+ reclaim_walk.private = vma;
+ walk_page_range(max(vma->vm_start, start),
+ min(vma->vm_end, end),
+ &reclaim_walk);
+ vma = vma->vm_next;
+ }
+ } else {
+ for (vma = mm->mmap; vma; vma = vma->vm_next) {
if (is_vm_hugetlb_page(vma))
continue;
if (type == RECLAIM_ANON && vma->vm_file)
continue;
+
if (type == RECLAIM_FILE && !vma->vm_file)
continue;
+ reclaim_walk.private = vma;
walk_page_range(vma->vm_start, vma->vm_end,
- &reclaim_walk);
+ &reclaim_walk);
}
- flush_tlb_mm(mm);
- up_read(&mm->mmap_sem);
- mmput(mm);
}
- put_task_struct(task);
+ flush_tlb_mm(mm);
+ up_read(&mm->mmap_sem);
+ mmput(mm);
+out:
+ put_task_struct(task);
return count;
+
+out_err:
+ return -EINVAL;
}
const struct file_operations proc_reclaim_operations = {
diff --git a/mm/Kconfig b/mm/Kconfig
index d119b5b..3460da4 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -501,4 +501,7 @@ config PROCESS_RECLAIM
(echo anon > /proc/PID/reclaim) reclaims anonymous pages only.
(echo all > /proc/PID/reclaim) reclaims all pages.
+ (echo addr size-byte > /proc/PID/reclaim) reclaims pages in
+ (addr, addr + size-bytes) of the process.
+
Any other vaule is ignored.
--
1.8.2.1
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2013-05-09 7:21 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-09 7:21 [PATCH v5 0/7] Per process reclaim Minchan Kim
2013-05-09 7:21 ` [PATCH v5 1/7] mm: prevent to write out dirty page in CMA by may_writepage Minchan Kim
2013-05-09 7:21 ` [PATCH v5 2/7] mm: Per process reclaim Minchan Kim
2013-05-09 7:21 ` [PATCH v5 3/7] mm: make shrink_page_list with pages work from multiple zones Minchan Kim
2013-05-09 7:21 ` [PATCH v5 4/7] mm: Remove shrink_page Minchan Kim
2013-05-09 7:21 ` [PATCH v5 5/7] mm: Enhance per process reclaim to consider shared pages Minchan Kim
2013-05-09 7:21 ` Minchan Kim [this message]
2013-05-22 0:33 ` [PATCH v5 6/7] mm: Support address range reclaim Andrew Morton
2013-05-27 8:24 ` Minchan Kim
2013-05-09 7:21 ` [PATCH v5 7/7] add documentation about reclaim knob on proc.txt Minchan Kim
2013-05-21 23:16 ` [PATCH v5 0/7] Per process reclaim Andrew Morton
2013-05-27 8:12 ` Minchan Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1368084089-24576-7-git-send-email-minchan@kernel.org \
--to=minchan@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=dave.hansen@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=minkyung88@lge.com \
--cc=mtk.manpages@gmail.com \
--cc=namhyung@kernel.org \
--cc=riel@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).