From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: benh@kernel.crashing.org, paulus@samba.org, linux-mm@kvack.org,
m.szyprowski@samsung.com, mina86@mina86.com
Cc: linuxppc-dev@lists.ozlabs.org,
"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Subject: [PATCH -V2 1/4] mm/cma: Move dma contiguous changes into a seperate config
Date: Fri, 28 Jun 2013 14:40:59 +0530 [thread overview]
Message-ID: <1372410662-3748-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com> (raw)
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
We want to use CMA for allocating hash page table and real mode area for
PPC64. Hence move DMA contiguous related changes into a seperate config
so that ppc64 can enable CMA without requiring DMA contiguous.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
arch/arm/configs/omap2plus_defconfig | 2 +-
arch/arm/configs/tegra_defconfig | 2 +-
arch/arm/include/asm/dma-contiguous.h | 2 +-
arch/arm/mm/dma-mapping.c | 6 +++---
drivers/base/Kconfig | 21 +++++----------------
drivers/base/Makefile | 2 +-
include/linux/dma-contiguous.h | 2 +-
mm/Kconfig | 24 ++++++++++++++++++++++++
8 files changed, 37 insertions(+), 24 deletions(-)
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index abbe319..098268f 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -71,7 +71,7 @@ CONFIG_MAC80211=m
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_DEFAULT_PID=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_CMA=y
+CONFIG_DMA_CMA=y
CONFIG_CONNECTOR=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index f7ba3161..34ae8f2 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -79,7 +79,7 @@ CONFIG_RFKILL_GPIO=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_CMA=y
+CONFIG_DMA_CMA=y
CONFIG_MTD=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_M25P80=y
diff --git a/arch/arm/include/asm/dma-contiguous.h b/arch/arm/include/asm/dma-contiguous.h
index 3ed37b4..e072bb2 100644
--- a/arch/arm/include/asm/dma-contiguous.h
+++ b/arch/arm/include/asm/dma-contiguous.h
@@ -2,7 +2,7 @@
#define ASMARM_DMA_CONTIGUOUS_H
#ifdef __KERNEL__
-#ifdef CONFIG_CMA
+#ifdef CONFIG_DMA_CMA
#include <linux/types.h>
#include <asm-generic/dma-contiguous.h>
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index ef3e0f3..1fb40dc 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -358,7 +358,7 @@ static int __init atomic_pool_init(void)
if (!pages)
goto no_pages;
- if (IS_ENABLED(CONFIG_CMA))
+ if (IS_ENABLED(CONFIG_DMA_CMA))
ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page,
atomic_pool_init);
else
@@ -670,7 +670,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
addr = __alloc_simple_buffer(dev, size, gfp, &page);
else if (!(gfp & __GFP_WAIT))
addr = __alloc_from_pool(size, &page);
- else if (!IS_ENABLED(CONFIG_CMA))
+ else if (!IS_ENABLED(CONFIG_DMA_CMA))
addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller);
else
addr = __alloc_from_contiguous(dev, size, prot, &page, caller);
@@ -759,7 +759,7 @@ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
__dma_free_buffer(page, size);
} else if (__free_from_pool(cpu_addr, size)) {
return;
- } else if (!IS_ENABLED(CONFIG_CMA)) {
+ } else if (!IS_ENABLED(CONFIG_DMA_CMA)) {
__dma_free_remap(cpu_addr, size);
__dma_free_buffer(page, size);
} else {
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index 07abd9d..74b7c98 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -202,11 +202,10 @@ config DMA_SHARED_BUFFER
APIs extension; the file's descriptor can then be passed on to other
driver.
-config CMA
- bool "Contiguous Memory Allocator"
- depends on HAVE_DMA_CONTIGUOUS && HAVE_MEMBLOCK
- select MIGRATION
- select MEMORY_ISOLATION
+config DMA_CMA
+ bool "DMA Contiguous Memory Allocator"
+ depends on HAVE_DMA_CONTIGUOUS
+ select CMA
help
This enables the Contiguous Memory Allocator which allows drivers
to allocate big physically-contiguous blocks of memory for use with
@@ -215,17 +214,7 @@ config CMA
For more information see <include/linux/dma-contiguous.h>.
If unsure, say "n".
-if CMA
-
-config CMA_DEBUG
- bool "CMA debug messages (DEVELOPMENT)"
- depends on DEBUG_KERNEL
- help
- Turns on debug messages in CMA. This produces KERN_DEBUG
- messages for every CMA call as well as various messages while
- processing calls such as dma_alloc_from_contiguous().
- This option does not affect warning and error messages.
-
+if DMA_CMA
comment "Default contiguous memory area size:"
config CMA_SIZE_MBYTES
diff --git a/drivers/base/Makefile b/drivers/base/Makefile
index 4e22ce3..5d93bb5 100644
--- a/drivers/base/Makefile
+++ b/drivers/base/Makefile
@@ -6,7 +6,7 @@ obj-y := core.o bus.o dd.o syscore.o \
attribute_container.o transport_class.o \
topology.o
obj-$(CONFIG_DEVTMPFS) += devtmpfs.o
-obj-$(CONFIG_CMA) += dma-contiguous.o
+obj-$(CONFIG_DMA_CMA) += dma-contiguous.o
obj-y += power/
obj-$(CONFIG_HAS_DMA) += dma-mapping.o
obj-$(CONFIG_HAVE_GENERIC_DMA_COHERENT) += dma-coherent.o
diff --git a/include/linux/dma-contiguous.h b/include/linux/dma-contiguous.h
index 01b5c84..00141d3 100644
--- a/include/linux/dma-contiguous.h
+++ b/include/linux/dma-contiguous.h
@@ -57,7 +57,7 @@ struct cma;
struct page;
struct device;
-#ifdef CONFIG_CMA
+#ifdef CONFIG_DMA_CMA
/*
* There is always at least global CMA area and a few optional device
diff --git a/mm/Kconfig b/mm/Kconfig
index e742d06..26a5f81 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -477,3 +477,27 @@ config FRONTSWAP
and swap data is stored as normal on the matching swap device.
If unsure, say Y to enable frontswap.
+
+config CMA
+ bool "Contiguous Memory Allocator"
+ depends on HAVE_MEMBLOCK
+ select MIGRATION
+ select MEMORY_ISOLATION
+ help
+ This enables the Contiguous Memory Allocator which allows other
+ subsystems to allocate big physically-contiguous blocks of memory.
+ CMA reserves a region of memory and allows only movable pages to
+ be allocated from it. This way, the kernel can use the memory for
+ pagecache and when a subsystem requests for contiguous area, the
+ allocated pages are migrated away to serve the contiguous request.
+
+ If unsure, say "n".
+
+config CMA_DEBUG
+ bool "CMA debug messages (DEVELOPMENT)"
+ depends on DEBUG_KERNEL && CMA
+ help
+ Turns on debug messages in CMA. This produces KERN_DEBUG
+ messages for every CMA call as well as various messages while
+ processing calls such as dma_alloc_from_contiguous().
+ This option does not affect warning and error messages.
--
1.8.1.2
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next reply other threads:[~2013-06-28 9:11 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-28 9:10 Aneesh Kumar K.V [this message]
2013-06-28 9:11 ` [PATCH -V2 2/4] powerpc: Contiguous memory allocator based hash page allocation Aneesh Kumar K.V
2013-06-29 7:25 ` Paul Mackerras
2013-06-28 9:11 ` [PATCH -V2 3/4] powerpc: Contiguous memory allocator based RMA allocation Aneesh Kumar K.V
2013-06-29 7:28 ` Paul Mackerras
2013-06-28 9:11 ` [PATCH -V2 4/4] powerpc/kvm: Use 256K chunk to track both RMA and hash page table allocation Aneesh Kumar K.V
2013-06-29 7:43 ` Paul Mackerras
2013-06-29 7:14 ` [PATCH -V2 1/4] mm/cma: Move dma contiguous changes into a seperate config Paul Mackerras
2013-07-01 11:52 ` Michal Nazarewicz
2013-07-01 13:01 ` Aneesh Kumar K.V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1372410662-3748-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com \
--to=aneesh.kumar@linux.vnet.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=linux-mm@kvack.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=m.szyprowski@samsung.com \
--cc=mina86@mina86.com \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).