From: Mel Gorman <mgorman@suse.de>
To: Peter Zijlstra <a.p.zijlstra@chello.nl>,
Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>,
Andrea Arcangeli <aarcange@redhat.com>,
Johannes Weiner <hannes@cmpxchg.org>,
Linux-MM <linux-mm@kvack.org>,
LKML <linux-kernel@vger.kernel.org>, Mel Gorman <mgorman@suse.de>
Subject: [PATCH 11/15] mm: numa: Scan pages with elevated page_mapcount
Date: Sat, 6 Jul 2013 00:08:58 +0100 [thread overview]
Message-ID: <1373065742-9753-12-git-send-email-mgorman@suse.de> (raw)
In-Reply-To: <1373065742-9753-1-git-send-email-mgorman@suse.de>
Currently automatic NUMA balancing is unable to distinguish between false
shared versus private pages except by ignoring pages with an elevated
page_mapcount entirely. This avoids shared pages bouncing between the
nodes whose task is using them but that is ignored quite a lot of data.
This patch kicks away the training wheels in preparation for adding support
for identifying shared/private pages is now in place. The ordering is so
that the impact of the shared/private detection can be easily measured. Note
that the patch does not migrate shared, file-backed within vmas marked
VM_EXEC as these are generally shared library pages. Migrating such pages
is not beneficial as there is an expectation they are read-shared between
caches and iTLB and iCache pressure is generally low.
Signed-off-by: Mel Gorman <mgorman@suse.de>
---
include/linux/migrate.h | 7 ++++---
mm/memory.c | 4 ++--
mm/migrate.c | 17 ++++++-----------
mm/mprotect.c | 4 +---
4 files changed, 13 insertions(+), 19 deletions(-)
diff --git a/include/linux/migrate.h b/include/linux/migrate.h
index a405d3dc..e7e26af 100644
--- a/include/linux/migrate.h
+++ b/include/linux/migrate.h
@@ -92,11 +92,12 @@ static inline int migrate_huge_page_move_mapping(struct address_space *mapping,
#endif /* CONFIG_MIGRATION */
#ifdef CONFIG_NUMA_BALANCING
-extern int migrate_misplaced_page(struct page *page, int node);
-extern int migrate_misplaced_page(struct page *page, int node);
+extern int migrate_misplaced_page(struct page *page,
+ struct vm_area_struct *vma, int node);
extern bool migrate_ratelimited(int node);
#else
-static inline int migrate_misplaced_page(struct page *page, int node)
+static inline int migrate_misplaced_page(struct page *page,
+ struct vm_area_struct *vma, int node)
{
return -EAGAIN; /* can't migrate now */
}
diff --git a/mm/memory.c b/mm/memory.c
index c28bf52..b06022a 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -3581,7 +3581,7 @@ int do_numa_page(struct mm_struct *mm, struct vm_area_struct *vma,
}
/* Migrate to the requested node */
- migrated = migrate_misplaced_page(page, target_nid);
+ migrated = migrate_misplaced_page(page, vma, target_nid);
if (migrated)
current_nid = target_nid;
@@ -3666,7 +3666,7 @@ static int do_pmd_numa_page(struct mm_struct *mm, struct vm_area_struct *vma,
/* Migrate to the requested node */
pte_unmap_unlock(pte, ptl);
- migrated = migrate_misplaced_page(page, target_nid);
+ migrated = migrate_misplaced_page(page, vma, target_nid);
if (migrated)
curr_nid = target_nid;
task_numa_fault(last_nid, curr_nid, 1, migrated);
diff --git a/mm/migrate.c b/mm/migrate.c
index 3bbaf5d..23f8122 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -1579,7 +1579,8 @@ int numamigrate_isolate_page(pg_data_t *pgdat, struct page *page)
* node. Caller is expected to have an elevated reference count on
* the page that will be dropped by this function before returning.
*/
-int migrate_misplaced_page(struct page *page, int node)
+int migrate_misplaced_page(struct page *page, struct vm_area_struct *vma,
+ int node)
{
pg_data_t *pgdat = NODE_DATA(node);
int isolated;
@@ -1587,10 +1588,11 @@ int migrate_misplaced_page(struct page *page, int node)
LIST_HEAD(migratepages);
/*
- * Don't migrate pages that are mapped in multiple processes.
- * TODO: Handle false sharing detection instead of this hammer
+ * Don't migrate file pages that are mapped in multiple processes
+ * with execute permissions as they are probably shared libraries.
*/
- if (page_mapcount(page) != 1)
+ if (page_mapcount(page) != 1 && page_is_file_cache(page) &&
+ (vma->vm_flags & VM_EXEC))
goto out;
/*
@@ -1641,13 +1643,6 @@ int migrate_misplaced_transhuge_page(struct mm_struct *mm,
int page_lru = page_is_file_cache(page);
/*
- * Don't migrate pages that are mapped in multiple processes.
- * TODO: Handle false sharing detection instead of this hammer
- */
- if (page_mapcount(page) != 1)
- goto out_dropref;
-
- /*
* Rate-limit the amount of data that is being migrated to a node.
* Optimal placement is no good if the memory bus is saturated and
* all the time is being spent migrating!
diff --git a/mm/mprotect.c b/mm/mprotect.c
index 94722a4..cacc64a 100644
--- a/mm/mprotect.c
+++ b/mm/mprotect.c
@@ -69,9 +69,7 @@ static unsigned long change_pte_range(struct vm_area_struct *vma, pmd_t *pmd,
if (last_nid != this_nid)
all_same_node = false;
- /* only check non-shared pages */
- if (!pte_numa(oldpte) &&
- page_mapcount(page) == 1) {
+ if (!pte_numa(oldpte)) {
ptent = pte_mknuma(ptent);
updated = true;
}
--
1.8.1.4
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2013-07-05 23:09 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-05 23:08 [PATCH 0/15] Basic scheduler support for automatic NUMA balancing V3 Mel Gorman
2013-07-05 23:08 ` [PATCH 01/15] mm: numa: Document automatic NUMA balancing sysctls Mel Gorman
2013-07-05 23:08 ` [PATCH 02/15] sched: Track NUMA hinting faults on per-node basis Mel Gorman
2013-07-05 23:08 ` [PATCH 03/15] sched: Select a preferred node with the most numa hinting faults Mel Gorman
2013-07-05 23:08 ` [PATCH 04/15] sched: Update NUMA hinting faults once per scan Mel Gorman
2013-07-05 23:08 ` [PATCH 05/15] sched: Favour moving tasks towards the preferred node Mel Gorman
2013-07-05 23:08 ` [PATCH 06/15] sched: Reschedule task on preferred NUMA node once selected Mel Gorman
2013-07-06 10:38 ` Peter Zijlstra
2013-07-08 8:34 ` Mel Gorman
2013-07-05 23:08 ` [PATCH 07/15] sched: Add infrastructure for split shared/private accounting of NUMA hinting faults Mel Gorman
2013-07-05 23:08 ` [PATCH 08/15] sched: Increase NUMA PTE scanning when a new preferred node is selected Mel Gorman
2013-07-05 23:08 ` [PATCH 09/15] sched: Check current->mm before allocating NUMA faults Mel Gorman
2013-07-05 23:08 ` [PATCH 10/15] sched: Set the scan rate proportional to the size of the task being scanned Mel Gorman
2013-07-05 23:08 ` Mel Gorman [this message]
2013-07-05 23:08 ` [PATCH 12/15] sched: Remove check that skips small VMAs Mel Gorman
2013-07-05 23:09 ` [PATCH 13/15] sched: Set preferred NUMA node based on number of private faults Mel Gorman
2013-07-06 10:41 ` Peter Zijlstra
2013-07-08 9:23 ` Mel Gorman
2013-07-06 10:44 ` Peter Zijlstra
2013-07-05 23:09 ` [PATCH 14/15] sched: Account for the number of preferred tasks running on a node when selecting a preferred node Mel Gorman
2013-07-06 10:46 ` Peter Zijlstra
2013-07-05 23:09 ` [PATCH 15/15] sched: Favour moving tasks towards nodes that incurred more faults Mel Gorman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1373065742-9753-12-git-send-email-mgorman@suse.de \
--to=mgorman@suse.de \
--cc=a.p.zijlstra@chello.nl \
--cc=aarcange@redhat.com \
--cc=hannes@cmpxchg.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mingo@kernel.org \
--cc=srikar@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).