linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Dominik Dingel <dingel@linux.vnet.ibm.com>
To: Gleb Natapov <gleb@redhat.com>, Paolo Bonzini <pbonzini@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>,
	Heiko Carstens <heiko.carstens@de.ibm.com>,
	Martin Schwidefsky <schwidefsky@de.ibm.com>,
	Cornelia Huck <cornelia.huck@de.ibm.com>,
	Xiantao Zhang <xiantao.zhang@intel.com>,
	Alexander Graf <agraf@suse.de>,
	Christoffer Dall <christoffer.dall@linaro.org>,
	Marc Zyngier <marc.zyngier@arm.com>,
	Ralf Baechle <ralf@linux-mips.org>,
	kvm@vger.kernel.org, linux-s390@vger.kernel.org,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	Dominik Dingel <dingel@linux.vnet.ibm.com>
Subject: [PATCH 1/4] PF: Add FAULT_FLAG_RETRY_NOWAIT for guest fault
Date: Tue,  9 Jul 2013 15:56:44 +0200	[thread overview]
Message-ID: <1373378207-10451-2-git-send-email-dingel@linux.vnet.ibm.com> (raw)
In-Reply-To: <1373378207-10451-1-git-send-email-dingel@linux.vnet.ibm.com>

In case of a fault retry exit sie64() with gmap_fault indication for the
running thread set. This makes it possible to handle async page faults
without the need for mm notifiers.

Based on a patch from Martin Schwidefsky.

Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
---
 arch/s390/include/asm/pgtable.h   |  2 ++
 arch/s390/include/asm/processor.h |  1 +
 arch/s390/kvm/kvm-s390.c          | 13 +++++++++++++
 arch/s390/mm/fault.c              | 26 ++++++++++++++++++++++----
 4 files changed, 38 insertions(+), 4 deletions(-)

diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 0ea4e59..4a4cc64 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -740,6 +740,7 @@ static inline void pgste_set_pte(pte_t *ptep, pte_t entry)
  * @table: pointer to the page directory
  * @asce: address space control element for gmap page table
  * @crst_list: list of all crst tables used in the guest address space
+ * @pfault_enabled: defines if pfaults are applicable for the guest
  */
 struct gmap {
 	struct list_head list;
@@ -748,6 +749,7 @@ struct gmap {
 	unsigned long asce;
 	void *private;
 	struct list_head crst_list;
+	unsigned long pfault_enabled;
 };
 
 /**
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index 6b49987..4fa96ca 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -77,6 +77,7 @@ struct thread_struct {
         unsigned long ksp;              /* kernel stack pointer             */
 	mm_segment_t mm_segment;
 	unsigned long gmap_addr;	/* address of last gmap fault. */
+	unsigned int gmap_pfault;	/* signal of a pending guest pfault */
 	struct per_regs per_user;	/* User specified PER registers */
 	struct per_event per_event;	/* Cause of the last PER trap */
 	unsigned long per_flags;	/* Flags to control debug behavior */
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index ba694d2..702daca 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -682,6 +682,15 @@ static int kvm_s390_handle_requests(struct kvm_vcpu *vcpu)
 	return 0;
 }
 
+static void kvm_arch_fault_in_sync(struct kvm_vcpu *vcpu)
+{
+	hva_t fault = gmap_fault(current->thread.gmap_addr, vcpu->arch.gmap);
+	struct mm_struct *mm = current->mm;
+	down_read(&mm->mmap_sem);
+	get_user_pages(current, mm, fault, 1, 1, 0, NULL, NULL);
+	up_read(&mm->mmap_sem);
+}
+
 static int __vcpu_run(struct kvm_vcpu *vcpu)
 {
 	int rc;
@@ -715,6 +724,10 @@ static int __vcpu_run(struct kvm_vcpu *vcpu)
 	if (rc < 0) {
 		if (kvm_is_ucontrol(vcpu->kvm)) {
 			rc = SIE_INTERCEPT_UCONTROL;
+		} else if (current->thread.gmap_pfault) {
+			kvm_arch_fault_in_sync(vcpu);
+			current->thread.gmap_pfault = 0;
+			rc = 0;
 		} else {
 			VCPU_EVENT(vcpu, 3, "%s", "fault in sie instruction");
 			trace_kvm_s390_sie_fault(vcpu);
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 047c3e4..7d4c4b1 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -50,6 +50,7 @@
 #define VM_FAULT_BADMAP		0x020000
 #define VM_FAULT_BADACCESS	0x040000
 #define VM_FAULT_SIGNAL		0x080000
+#define VM_FAULT_PFAULT		0x100000
 
 static unsigned long store_indication __read_mostly;
 
@@ -232,6 +233,7 @@ static noinline void do_fault_error(struct pt_regs *regs, int fault)
 			return;
 		}
 	case VM_FAULT_BADCONTEXT:
+	case VM_FAULT_PFAULT:
 		do_no_context(regs);
 		break;
 	case VM_FAULT_SIGNAL:
@@ -269,6 +271,9 @@ static noinline void do_fault_error(struct pt_regs *regs, int fault)
  */
 static inline int do_exception(struct pt_regs *regs, int access)
 {
+#ifdef CONFIG_PGSTE
+	struct gmap *gmap;
+#endif
 	struct task_struct *tsk;
 	struct mm_struct *mm;
 	struct vm_area_struct *vma;
@@ -307,9 +312,10 @@ static inline int do_exception(struct pt_regs *regs, int access)
 	down_read(&mm->mmap_sem);
 
 #ifdef CONFIG_PGSTE
-	if ((current->flags & PF_VCPU) && S390_lowcore.gmap) {
-		address = __gmap_fault(address,
-				     (struct gmap *) S390_lowcore.gmap);
+	gmap = (struct gmap *)
+		((current->flags & PF_VCPU) ? S390_lowcore.gmap : 0);
+	if (gmap) {
+		address = __gmap_fault(address, gmap);
 		if (address == -EFAULT) {
 			fault = VM_FAULT_BADMAP;
 			goto out_up;
@@ -318,6 +324,8 @@ static inline int do_exception(struct pt_regs *regs, int access)
 			fault = VM_FAULT_OOM;
 			goto out_up;
 		}
+		if (test_bit(1, &gmap->pfault_enabled))
+			flags |= FAULT_FLAG_RETRY_NOWAIT;
 	}
 #endif
 
@@ -374,9 +382,19 @@ retry:
 				      regs, address);
 		}
 		if (fault & VM_FAULT_RETRY) {
+#ifdef CONFIG_PGSTE
+			if (gmap && (flags & FAULT_FLAG_RETRY_NOWAIT)) {
+				/* FAULT_FLAG_RETRY_NOWAIT has been set,
+				 * mmap_sem has not been released */
+				current->thread.gmap_pfault = 1;
+				fault = VM_FAULT_PFAULT;
+				goto out_up;
+			}
+#endif
 			/* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk
 			 * of starvation. */
-			flags &= ~FAULT_FLAG_ALLOW_RETRY;
+			flags &= ~(FAULT_FLAG_ALLOW_RETRY |
+				   FAULT_FLAG_RETRY_NOWAIT);
 			flags |= FAULT_FLAG_TRIED;
 			down_read(&mm->mmap_sem);
 			goto retry;
-- 
1.8.2.2

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  reply	other threads:[~2013-07-09 13:57 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-09 13:56 [PATCH v3 0/4] Enable async page faults on s390 Dominik Dingel
2013-07-09 13:56 ` Dominik Dingel [this message]
2013-07-09 15:23   ` [PATCH 1/4] PF: Add FAULT_FLAG_RETRY_NOWAIT for guest fault Gleb Natapov
2013-07-09 15:36     ` Christian Borntraeger
2013-07-09 15:43       ` Gleb Natapov
2013-07-09 13:56 ` [PATCH 2/4] PF: Make KVM_HVA_ERR_BAD usable on s390 Dominik Dingel
2013-07-09 15:38   ` Gleb Natapov
2013-07-09 13:56 ` [PATCH 3/4] PF: Provide additional direct page notification Dominik Dingel
2013-07-09 16:01   ` Christian Borntraeger
2013-07-10 10:39     ` Alexander Graf
2013-07-10 10:42       ` Gleb Natapov
2013-07-10 10:45         ` Alexander Graf
2013-07-10 10:48           ` Gleb Natapov
2013-07-10 10:52             ` Alexander Graf
2013-07-10 10:49       ` Christian Borntraeger
2013-07-10 10:51         ` Alexander Graf
2013-07-09 13:56 ` [PATCH 4/4] PF: Async page fault support on s390 Dominik Dingel
2013-07-10  8:18   ` Christian Borntraeger
  -- strict thread matches above, loose matches on Subject: below --
2013-07-10 12:59 [PATCH v4 0/4] Enable async page faults " Dominik Dingel
2013-07-10 12:59 ` [PATCH 1/4] PF: Add FAULT_FLAG_RETRY_NOWAIT for guest fault Dominik Dingel
2013-07-05 20:55 [RFC PATCH v2 0/4] Enable async page faults on s390 Dominik Dingel
2013-07-05 20:55 ` [PATCH 1/4] PF: Add FAULT_FLAG_RETRY_NOWAIT for guest fault Dominik Dingel
2013-06-10 12:03 [RFC PATCH 0/4] Enable async page faults on s390 Dominik Dingel
2013-06-10 12:03 ` [PATCH 1/4] PF: Add FAULT_FLAG_RETRY_NOWAIT for guest fault Dominik Dingel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1373378207-10451-2-git-send-email-dingel@linux.vnet.ibm.com \
    --to=dingel@linux.vnet.ibm.com \
    --cc=agraf@suse.de \
    --cc=borntraeger@de.ibm.com \
    --cc=christoffer.dall@linaro.org \
    --cc=cornelia.huck@de.ibm.com \
    --cc=gleb@redhat.com \
    --cc=heiko.carstens@de.ibm.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-s390@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=pbonzini@redhat.com \
    --cc=ralf@linux-mips.org \
    --cc=schwidefsky@de.ibm.com \
    --cc=xiantao.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).