From: Mel Gorman <mgorman@suse.de>
To: Peter Zijlstra <a.p.zijlstra@chello.nl>,
Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>,
Andrea Arcangeli <aarcange@redhat.com>,
Johannes Weiner <hannes@cmpxchg.org>,
Linux-MM <linux-mm@kvack.org>,
LKML <linux-kernel@vger.kernel.org>, Mel Gorman <mgorman@suse.de>
Subject: [PATCH 04/18] mm: numa: Do not migrate or account for hinting faults on the zero page
Date: Mon, 15 Jul 2013 16:20:06 +0100 [thread overview]
Message-ID: <1373901620-2021-5-git-send-email-mgorman@suse.de> (raw)
In-Reply-To: <1373901620-2021-1-git-send-email-mgorman@suse.de>
The zero page is not replicated between nodes and is often shared
between processes. The data is read-only and likely to be cached in
local CPUs if heavily accessed meaning that the remote memory access
cost is less of a concern. This patch stops accounting for numa hinting
faults on the zero page in both terms of counting faults and scheduling
tasks on nodes.
Signed-off-by: Mel Gorman <mgorman@suse.de>
---
mm/huge_memory.c | 9 +++++++++
mm/memory.c | 7 ++++++-
2 files changed, 15 insertions(+), 1 deletion(-)
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index e4a79fa..ec938ed 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -1302,6 +1302,15 @@ int do_huge_pmd_numa_page(struct mm_struct *mm, struct vm_area_struct *vma,
page = pmd_page(pmd);
get_page(page);
+
+ /*
+ * Do not account for faults against the huge zero page. The read-only
+ * data is likely to be read-cached on the local CPUs and it is less
+ * useful to know about local versus remote hits on the zero page.
+ */
+ if (is_huge_zero_pfn(page_to_pfn(page)))
+ goto clear_pmdnuma;
+
src_nid = numa_node_id();
count_vm_numa_event(NUMA_HINT_FAULTS);
if (src_nid == page_to_nid(page))
diff --git a/mm/memory.c b/mm/memory.c
index ba94dec..6c6f6b0 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -3560,8 +3560,13 @@ int do_numa_page(struct mm_struct *mm, struct vm_area_struct *vma,
set_pte_at(mm, addr, ptep, pte);
update_mmu_cache(vma, addr, ptep);
+ /*
+ * Do not account for faults against the zero page. The read-only data
+ * is likely to be read-cached on the local CPUs and it is less useful
+ * to know about local versus remote hits on the zero page.
+ */
page = vm_normal_page(vma, addr, pte);
- if (!page) {
+ if (!page || is_zero_pfn(page_to_pfn(page))) {
pte_unmap_unlock(ptep, ptl);
return 0;
}
--
1.8.1.4
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2013-07-15 15:20 UTC|newest]
Thread overview: 102+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-15 15:20 [PATCH 0/18] Basic scheduler support for automatic NUMA balancing V5 Mel Gorman
2013-07-15 15:20 ` [PATCH 01/18] mm: numa: Document automatic NUMA balancing sysctls Mel Gorman
2013-07-15 15:20 ` [PATCH 02/18] sched: Track NUMA hinting faults on per-node basis Mel Gorman
2013-07-17 10:50 ` Peter Zijlstra
2013-07-31 7:54 ` Mel Gorman
2013-07-29 10:10 ` Peter Zijlstra
2013-07-31 7:54 ` Mel Gorman
2013-07-15 15:20 ` [PATCH 03/18] mm: numa: Account for THP numa hinting faults on the correct node Mel Gorman
2013-07-17 0:33 ` Hillf Danton
2013-07-17 1:26 ` Wanpeng Li
2013-07-17 1:26 ` Wanpeng Li
2013-07-15 15:20 ` Mel Gorman [this message]
2013-07-17 11:00 ` [PATCH 04/18] mm: numa: Do not migrate or account for hinting faults on the zero page Peter Zijlstra
2013-07-31 8:11 ` Mel Gorman
2013-07-15 15:20 ` [PATCH 05/18] sched: Select a preferred node with the most numa hinting faults Mel Gorman
2013-07-15 15:20 ` [PATCH 06/18] sched: Update NUMA hinting faults once per scan Mel Gorman
2013-07-15 15:20 ` [PATCH 07/18] sched: Favour moving tasks towards the preferred node Mel Gorman
2013-07-25 10:40 ` [PATCH] sched, numa: migrates_degrades_locality() Peter Zijlstra
2013-07-31 8:44 ` Mel Gorman
2013-07-31 8:50 ` Peter Zijlstra
2013-07-15 15:20 ` [PATCH 08/18] sched: Reschedule task on preferred NUMA node once selected Mel Gorman
2013-07-17 1:31 ` Hillf Danton
2013-07-31 9:07 ` Mel Gorman
2013-07-31 9:38 ` Srikar Dronamraju
2013-08-01 4:47 ` Srikar Dronamraju
2013-08-01 15:38 ` Mel Gorman
2013-07-15 15:20 ` [PATCH 09/18] sched: Add infrastructure for split shared/private accounting of NUMA hinting faults Mel Gorman
2013-07-17 2:17 ` Hillf Danton
2013-07-31 9:08 ` Mel Gorman
2013-07-15 15:20 ` [PATCH 10/18] sched: Increase NUMA PTE scanning when a new preferred node is selected Mel Gorman
2013-07-15 15:20 ` [PATCH 11/18] sched: Check current->mm before allocating NUMA faults Mel Gorman
2013-07-15 15:20 ` [PATCH 12/18] sched: Set the scan rate proportional to the size of the task being scanned Mel Gorman
2013-07-15 15:20 ` [PATCH 13/18] mm: numa: Scan pages with elevated page_mapcount Mel Gorman
2013-07-17 5:22 ` Sam Ben
2013-07-31 9:13 ` Mel Gorman
2013-07-15 15:20 ` [PATCH 14/18] sched: Remove check that skips small VMAs Mel Gorman
2013-07-15 15:20 ` [PATCH 15/18] sched: Set preferred NUMA node based on number of private faults Mel Gorman
2013-07-18 1:53 ` [PATCH 15/18] fix compilation with !CONFIG_NUMA_BALANCING Rik van Riel
2013-07-31 9:19 ` Mel Gorman
2013-07-26 11:20 ` [PATCH 15/18] sched: Set preferred NUMA node based on number of private faults Peter Zijlstra
2013-07-31 9:29 ` Mel Gorman
2013-07-31 9:34 ` Peter Zijlstra
2013-07-31 10:10 ` Mel Gorman
2013-07-15 15:20 ` [PATCH 16/18] sched: Avoid overloading CPUs on a preferred NUMA node Mel Gorman
2013-07-15 20:03 ` Peter Zijlstra
2013-07-16 8:23 ` Mel Gorman
2013-07-16 10:35 ` Peter Zijlstra
2013-07-16 15:55 ` Hillf Danton
2013-07-16 16:01 ` Mel Gorman
2013-07-17 10:54 ` Peter Zijlstra
2013-07-31 9:49 ` Mel Gorman
2013-08-01 7:10 ` Srikar Dronamraju
2013-08-01 15:42 ` Mel Gorman
2013-07-15 15:20 ` [PATCH 17/18] sched: Retry migration of tasks to CPU on a preferred node Mel Gorman
2013-07-25 10:33 ` Peter Zijlstra
2013-07-31 10:03 ` Mel Gorman
2013-07-31 10:05 ` Peter Zijlstra
2013-07-31 10:07 ` Mel Gorman
2013-07-25 10:35 ` Peter Zijlstra
2013-08-01 5:13 ` Srikar Dronamraju
2013-08-01 15:46 ` Mel Gorman
2013-07-15 15:20 ` [PATCH 18/18] sched: Swap tasks when reschuling if a CPU on a target node is imbalanced Mel Gorman
2013-07-15 20:11 ` Peter Zijlstra
2013-07-16 9:41 ` Mel Gorman
2013-08-01 4:59 ` Srikar Dronamraju
2013-08-01 15:48 ` Mel Gorman
2013-07-15 20:14 ` [PATCH 0/18] Basic scheduler support for automatic NUMA balancing V5 Peter Zijlstra
2013-07-16 15:10 ` Srikar Dronamraju
2013-07-25 10:36 ` Peter Zijlstra
2013-07-31 10:30 ` Mel Gorman
2013-07-31 10:48 ` Peter Zijlstra
2013-07-31 11:57 ` Mel Gorman
2013-07-31 15:30 ` Peter Zijlstra
2013-07-31 16:11 ` Mel Gorman
2013-07-31 16:39 ` Peter Zijlstra
2013-08-01 15:51 ` Mel Gorman
2013-07-25 10:38 ` [PATCH] mm, numa: Sanitize task_numa_fault() callsites Peter Zijlstra
2013-07-31 11:25 ` Mel Gorman
2013-07-25 10:41 ` [PATCH] sched, numa: Improve scanner Peter Zijlstra
2013-07-25 10:46 ` [PATCH] mm, sched, numa: Create a per-task MPOL_INTERLEAVE policy Peter Zijlstra
2013-07-26 9:55 ` Peter Zijlstra
2013-08-26 16:10 ` Peter Zijlstra
2013-08-26 16:14 ` Peter Zijlstra
2013-07-30 11:24 ` [PATCH] mm, numa: Change page last {nid,pid} into {cpu,pid} Peter Zijlstra
2013-08-01 22:33 ` Rik van Riel
2013-07-30 11:38 ` [PATCH] sched, numa: Use {cpu, pid} to create task groups for shared faults Peter Zijlstra
2013-07-31 15:07 ` Peter Zijlstra
2013-07-31 15:38 ` Peter Zijlstra
2013-07-31 15:45 ` Don Morris
2013-07-31 16:05 ` Peter Zijlstra
2013-08-02 16:47 ` [PATCH -v3] " Peter Zijlstra
2013-08-02 16:50 ` [PATCH] mm, numa: Do not group on RO pages Peter Zijlstra
2013-08-02 19:56 ` Peter Zijlstra
2013-08-05 19:36 ` [PATCH] numa,sched: use group fault statistics in numa placement Rik van Riel
2013-08-09 13:55 ` Don Morris
2013-08-28 16:41 ` [PATCH -v3] sched, numa: Use {cpu, pid} to create task groups for shared faults Peter Zijlstra
2013-08-28 17:10 ` Rik van Riel
2013-08-01 6:23 ` [PATCH,RFC] numa,sched: use group fault statistics in numa placement Rik van Riel
2013-08-01 10:37 ` Peter Zijlstra
2013-08-01 16:35 ` Rik van Riel
2013-08-01 22:36 ` [RFC PATCH -v2] " Rik van Riel
2013-07-30 13:58 ` [PATCH 0/18] Basic scheduler support for automatic NUMA balancing V5 Andrew Theurer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1373901620-2021-5-git-send-email-mgorman@suse.de \
--to=mgorman@suse.de \
--cc=a.p.zijlstra@chello.nl \
--cc=aarcange@redhat.com \
--cc=hannes@cmpxchg.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mingo@kernel.org \
--cc=srikar@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).