From: Tang Chen <tangchen@cn.fujitsu.com>
To: konrad.wilk@oracle.com, robert.moore@intel.com,
lv.zheng@intel.com, rjw@sisk.pl, lenb@kernel.org,
tglx@linutronix.de, mingo@elte.hu, hpa@zytor.com,
akpm@linux-foundation.org, tj@kernel.org, trenn@suse.de,
yinghai@kernel.org, jiang.liu@huawei.com, wency@cn.fujitsu.com,
laijs@cn.fujitsu.com, isimatu.yasuaki@jp.fujitsu.com,
izumi.taku@jp.fujitsu.com, mgorman@suse.de, minchan@kernel.org,
mina86@mina86.com, gong.chen@linux.intel.com,
vasilis.liaskovitis@profitbricks.com, lwoodman@redhat.com,
riel@redhat.com, jweiner@redhat.com, prarit@redhat.com,
zhangyanfei@cn.fujitsu.com, yanghy@cn.fujitsu.com
Cc: x86@kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-mm@kvack.org,
linux-acpi@vger.kernel.org
Subject: [PATCH 1/8] x86: Make get_ramdisk_{image|size}() global.
Date: Wed, 21 Aug 2013 18:15:36 +0800 [thread overview]
Message-ID: <1377080143-28455-2-git-send-email-tangchen@cn.fujitsu.com> (raw)
In-Reply-To: <1377080143-28455-1-git-send-email-tangchen@cn.fujitsu.com>
From: Yinghai Lu <yinghai@kernel.org>
This patch does two things:
1. Make get_ramdisk_image() and get_ramdisk_size() global so that we can use
them in the later patches.
2. In later patches, we are going to call them in head_32.S before paging is
enabled. In that case, we can only use physical address to access global
variable like boot_params. So make them take a boot_params pointer parameter
so that we can pass va or pa to them.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Tested-by: Thomas Renninger <trenn@suse.de>
Reviewed-by: Tang Chen <tangchen@cn.fujitsu.com>
Tested-by: Tang Chen <tangchen@cn.fujitsu.com>
---
arch/x86/include/asm/setup.h | 3 +++
arch/x86/kernel/setup.c | 28 ++++++++++++++--------------
2 files changed, 17 insertions(+), 14 deletions(-)
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index b7bf350..4f71d48 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -106,6 +106,9 @@ void *extend_brk(size_t size, size_t align);
RESERVE_BRK(name, sizeof(type) * entries)
extern void probe_roms(void);
+u64 get_ramdisk_image(struct boot_params *bp);
+u64 get_ramdisk_size(struct boot_params *bp);
+
#ifdef __i386__
void __init i386_start_kernel(void);
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index f8ec578..5bfd4c8 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -297,19 +297,19 @@ static void __init reserve_brk(void)
#ifdef CONFIG_BLK_DEV_INITRD
-static u64 __init get_ramdisk_image(void)
+u64 __init get_ramdisk_image(struct boot_params *bp)
{
- u64 ramdisk_image = boot_params.hdr.ramdisk_image;
+ u64 ramdisk_image = bp->hdr.ramdisk_image;
- ramdisk_image |= (u64)boot_params.ext_ramdisk_image << 32;
+ ramdisk_image |= (u64)bp->ext_ramdisk_image << 32;
return ramdisk_image;
}
-static u64 __init get_ramdisk_size(void)
+u64 __init get_ramdisk_size(struct boot_params *bp)
{
- u64 ramdisk_size = boot_params.hdr.ramdisk_size;
+ u64 ramdisk_size = bp->hdr.ramdisk_size;
- ramdisk_size |= (u64)boot_params.ext_ramdisk_size << 32;
+ ramdisk_size |= (u64)bp->ext_ramdisk_size << 32;
return ramdisk_size;
}
@@ -318,8 +318,8 @@ static u64 __init get_ramdisk_size(void)
static void __init relocate_initrd(void)
{
/* Assume only end is not page aligned */
- u64 ramdisk_image = get_ramdisk_image();
- u64 ramdisk_size = get_ramdisk_size();
+ u64 ramdisk_image = get_ramdisk_image(&boot_params);
+ u64 ramdisk_size = get_ramdisk_size(&boot_params);
u64 area_size = PAGE_ALIGN(ramdisk_size);
u64 ramdisk_here;
unsigned long slop, clen, mapaddr;
@@ -358,8 +358,8 @@ static void __init relocate_initrd(void)
ramdisk_size -= clen;
}
- ramdisk_image = get_ramdisk_image();
- ramdisk_size = get_ramdisk_size();
+ ramdisk_image = get_ramdisk_image(&boot_params);
+ ramdisk_size = get_ramdisk_size(&boot_params);
printk(KERN_INFO "Move RAMDISK from [mem %#010llx-%#010llx] to"
" [mem %#010llx-%#010llx]\n",
ramdisk_image, ramdisk_image + ramdisk_size - 1,
@@ -369,8 +369,8 @@ static void __init relocate_initrd(void)
static void __init early_reserve_initrd(void)
{
/* Assume only end is not page aligned */
- u64 ramdisk_image = get_ramdisk_image();
- u64 ramdisk_size = get_ramdisk_size();
+ u64 ramdisk_image = get_ramdisk_image(&boot_params);
+ u64 ramdisk_size = get_ramdisk_size(&boot_params);
u64 ramdisk_end = PAGE_ALIGN(ramdisk_image + ramdisk_size);
if (!boot_params.hdr.type_of_loader ||
@@ -382,8 +382,8 @@ static void __init early_reserve_initrd(void)
static void __init reserve_initrd(void)
{
/* Assume only end is not page aligned */
- u64 ramdisk_image = get_ramdisk_image();
- u64 ramdisk_size = get_ramdisk_size();
+ u64 ramdisk_image = get_ramdisk_image(&boot_params);
+ u64 ramdisk_size = get_ramdisk_size(&boot_params);
u64 ramdisk_end = PAGE_ALIGN(ramdisk_image + ramdisk_size);
u64 mapped_size;
--
1.7.1
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2013-08-21 10:17 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-21 10:15 [PATCH 0/8] x86, acpi: Move acpi_initrd_override() earlier Tang Chen
2013-08-21 10:15 ` Tang Chen [this message]
2013-08-21 10:15 ` [PATCH 2/8] x86, microcode: Use get_ramdisk_{image|size}() in microcode handling Tang Chen
2013-08-21 10:15 ` [PATCH 3/8] x86, acpi: Move table_sigs[] to stack Tang Chen
2013-08-21 10:15 ` [PATCH 4/8] x86, acpi, brk: Extend BRK 256KB to store acpi override tables Tang Chen
2013-08-21 10:15 ` [PATCH 5/8] x86, brk: Make extend_brk() available with va/pa Tang Chen
2013-08-21 12:26 ` Konrad Rzeszutek Wilk
2013-08-21 12:35 ` H. Peter Anvin
2013-08-21 14:42 ` Konrad Rzeszutek Wilk
2013-08-21 15:04 ` H. Peter Anvin
2013-08-21 10:15 ` [PATCH 6/8] x86, acpi: Make acpi_initrd_override() available with va or pa Tang Chen
2013-08-21 10:15 ` [PATCH 7/8] x86, acpi, brk: Make early_alloc_acpi_override_tables_buf() available with va/pa Tang Chen
2013-08-21 10:15 ` [PATCH 8/8] x86, acpi: Do acpi_initrd_override() earlier in head_32.S/head64.c Tang Chen
2013-08-21 10:42 ` [PATCH 0/8] x86, acpi: Move acpi_initrd_override() earlier Tang Chen
2013-08-21 13:06 ` Tejun Heo
2013-08-21 15:00 ` Zhang Yanfei
2013-08-21 15:36 ` Tejun Heo
2013-08-21 19:31 ` Toshi Kani
2013-08-21 19:54 ` Tejun Heo
2013-08-21 20:29 ` Toshi Kani
2013-08-21 20:40 ` Tejun Heo
2013-08-21 22:36 ` Toshi Kani
2013-08-22 3:32 ` Tejun Heo
2013-08-22 15:52 ` Toshi Kani
2013-08-22 18:31 ` Tejun Heo
2013-08-22 19:39 ` Zhang Yanfei
2013-08-22 19:45 ` Tejun Heo
2013-08-22 20:11 ` Toshi Kani
2013-08-22 20:21 ` Tejun Heo
2013-08-22 20:35 ` Tejun Heo
2013-08-22 21:06 ` Toshi Kani
2013-08-22 21:21 ` Tejun Heo
2013-08-22 22:17 ` Toshi Kani
2013-08-23 13:04 ` Tejun Heo
2013-08-23 13:08 ` H. Peter Anvin
2013-08-23 14:19 ` Tejun Heo
2013-08-23 14:24 ` H. Peter Anvin
2013-08-23 14:35 ` Tejun Heo
2013-08-23 14:57 ` Tejun Heo
2013-08-23 16:14 ` Toshi Kani
2013-08-23 16:24 ` Tejun Heo
2013-08-23 17:13 ` Toshi Kani
2013-08-23 17:29 ` Zhang Yanfei
2013-08-23 16:54 ` Zhang Yanfei
2013-08-23 18:18 ` Yinghai Lu
2013-08-23 18:25 ` H. Peter Anvin
2013-08-23 20:33 ` chen tang
2013-08-23 21:08 ` Yinghai Lu
2013-08-23 22:27 ` chen tang
2013-08-23 18:29 ` Toshi Kani
2013-08-23 21:37 ` chen tang
2013-08-23 21:52 ` Tejun Heo
2013-08-23 23:56 ` chen tang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1377080143-28455-2-git-send-email-tangchen@cn.fujitsu.com \
--to=tangchen@cn.fujitsu.com \
--cc=akpm@linux-foundation.org \
--cc=gong.chen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=isimatu.yasuaki@jp.fujitsu.com \
--cc=izumi.taku@jp.fujitsu.com \
--cc=jiang.liu@huawei.com \
--cc=jweiner@redhat.com \
--cc=konrad.wilk@oracle.com \
--cc=laijs@cn.fujitsu.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=lv.zheng@intel.com \
--cc=lwoodman@redhat.com \
--cc=mgorman@suse.de \
--cc=mina86@mina86.com \
--cc=minchan@kernel.org \
--cc=mingo@elte.hu \
--cc=prarit@redhat.com \
--cc=riel@redhat.com \
--cc=rjw@sisk.pl \
--cc=robert.moore@intel.com \
--cc=tglx@linutronix.de \
--cc=tj@kernel.org \
--cc=trenn@suse.de \
--cc=vasilis.liaskovitis@profitbricks.com \
--cc=wency@cn.fujitsu.com \
--cc=x86@kernel.org \
--cc=yanghy@cn.fujitsu.com \
--cc=yinghai@kernel.org \
--cc=zhangyanfei@cn.fujitsu.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).