linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: riel@redhat.com
To: linux-kernel@vger.kernel.org
Cc: kvm@vger.kernel.org, linux-mm@kvack.org, peterz@infradead.org,
	chegu_vinod@hp.com, aarcange@redhat.com,
	akpm@linux-foundation.org
Subject: [PATCH -mm 3/3] move mmu notifier call from change_protection to change_pmd_range
Date: Tue, 18 Feb 2014 17:12:46 -0500	[thread overview]
Message-ID: <1392761566-24834-4-git-send-email-riel@redhat.com> (raw)
In-Reply-To: <1392761566-24834-1-git-send-email-riel@redhat.com>

From: Rik van Riel <riel@redhat.com>

The NUMA scanning code can end up iterating over many gigabytes
of unpopulated memory, especially in the case of a freshly started
KVM guest with lots of memory.

This results in the mmu notifier code being called even when
there are no mapped pages in a virtual address range. The amount
of time wasted can be enough to trigger soft lockup warnings
with very large KVM guests.

This patch moves the mmu notifier call to the pmd level, which
represents 1GB areas of memory on x86-64. Furthermore, the mmu
notifier code is only called from the address in the PMD where
present mappings are first encountered.

The hugetlbfs code is left alone for now; hugetlb mappings are
not relocatable, and as such are left alone by the NUMA code,
and should never trigger this problem to begin with.

Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Xing Gang <gang.xing@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
---
 mm/mprotect.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/mm/mprotect.c b/mm/mprotect.c
index 6006c05..44850ee 100644
--- a/mm/mprotect.c
+++ b/mm/mprotect.c
@@ -109,9 +109,11 @@ static inline unsigned long change_pmd_range(struct vm_area_struct *vma,
 		pgprot_t newprot, int dirty_accountable, int prot_numa)
 {
 	pmd_t *pmd;
+	struct mm_struct *mm = vma->vm_mm;
 	unsigned long next;
 	unsigned long pages = 0;
 	unsigned long nr_huge_updates = 0;
+	unsigned long mni_start = 0;
 
 	pmd = pmd_offset(pud, addr);
 	do {
@@ -120,6 +122,13 @@ static inline unsigned long change_pmd_range(struct vm_area_struct *vma,
 		next = pmd_addr_end(addr, end);
 		if (!pmd_trans_huge(*pmd) && pmd_none_or_clear_bad(pmd))
 				continue;
+
+		/* invoke the mmu notifier if the pmd is populated */
+		if (!mni_start) {
+			mni_start = addr;
+			mmu_notifier_invalidate_range_start(mm, mni_start, end);
+		}
+
 		if (pmd_trans_huge(*pmd)) {
 			if (next - addr != HPAGE_PMD_SIZE)
 				split_huge_page_pmd(vma, addr, pmd);
@@ -143,6 +152,9 @@ static inline unsigned long change_pmd_range(struct vm_area_struct *vma,
 		pages += this_pages;
 	} while (pmd++, addr = next, addr != end);
 
+	if (mni_start)
+		mmu_notifier_invalidate_range_end(mm, mni_start, end);
+
 	if (nr_huge_updates)
 		count_vm_numa_events(NUMA_HUGE_PTE_UPDATES, nr_huge_updates);
 	return pages;
@@ -205,12 +217,12 @@ unsigned long change_protection(struct vm_area_struct *vma, unsigned long start,
 	struct mm_struct *mm = vma->vm_mm;
 	unsigned long pages;
 
-	mmu_notifier_invalidate_range_start(mm, start, end);
-	if (is_vm_hugetlb_page(vma))
+	if (is_vm_hugetlb_page(vma)) {
+		mmu_notifier_invalidate_range_start(mm, start, end);
 		pages = hugetlb_change_protection(vma, start, end, newprot);
-	else
+		mmu_notifier_invalidate_range_end(mm, start, end);
+	} else
 		pages = change_protection_range(vma, start, end, newprot, dirty_accountable, prot_numa);
-	mmu_notifier_invalidate_range_end(mm, start, end);
 
 	return pages;
 }
-- 
1.8.5.3

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2014-02-18 22:13 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-18 22:12 [PATCH -mm 0/3] fix numa vs kvm scalability issue riel
2014-02-18 22:12 ` [PATCH -mm 1/3] sched,numa: add cond_resched to task_numa_work riel
2014-02-18 22:12 ` [PATCH -mm 2/3] mm,numa: reorganize change_pmd_range riel
2014-02-19  2:22   ` David Rientjes
2014-02-18 22:12 ` riel [this message]
2014-02-19  2:24   ` [PATCH -mm 3/3] move mmu notifier call from change_protection to change_pmd_range David Rientjes
2014-02-19  3:08     ` Rik van Riel
2014-02-19  3:18     ` [PATCH -mm v2 " Rik van Riel
2014-02-19  8:59 ` [PATCH -mm 0/3] fix numa vs kvm scalability issue Peter Zijlstra
2014-02-19 19:28   ` Andrew Morton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1392761566-24834-4-git-send-email-riel@redhat.com \
    --to=riel@redhat.com \
    --cc=aarcange@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=chegu_vinod@hp.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=peterz@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).