From: Steve Capper <steve.capper@linaro.org>
To: linux-arm-kernel@lists.infradead.org, catalin.marinas@arm.com,
linux@arm.linux.org.uk, linux-mm@kvack.org,
linux-arch@vger.kernel.org
Cc: peterz@infradead.org, gary.robertson@linaro.org,
anders.roxell@linaro.org, akpm@linux-foundation.org,
Steve Capper <steve.capper@linaro.org>
Subject: [RFC PATCH V4 2/7] arm: mm: Introduce special ptes for LPAE
Date: Fri, 28 Mar 2014 15:01:27 +0000 [thread overview]
Message-ID: <1396018892-6773-3-git-send-email-steve.capper@linaro.org> (raw)
In-Reply-To: <1396018892-6773-1-git-send-email-steve.capper@linaro.org>
We need a mechanism to tag ptes as being special, this indicates that
no attempt should be made to access the underlying struct page *
associated with the pte. This is used by the fast_gup when operating on
ptes as it has no means to access VMAs (that also contain this
information) locklessly.
The L_PTE_SPECIAL bit is already allocated for LPAE, this patch modifies
pte_special and pte_mkspecial to make use of it, and defines
__HAVE_ARCH_PTE_SPECIAL.
This patch also excludes special ptes from the icache/dcache sync logic.
Signed-off-by: Steve Capper <steve.capper@linaro.org>
---
Changed in V4: set_pte_at will not perform an icache sync for special
ptes.
---
arch/arm/include/asm/pgtable-2level.h | 2 ++
arch/arm/include/asm/pgtable-3level.h | 8 ++++++++
arch/arm/include/asm/pgtable.h | 6 ++----
3 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h
index dfff709..26d1742 100644
--- a/arch/arm/include/asm/pgtable-2level.h
+++ b/arch/arm/include/asm/pgtable-2level.h
@@ -181,6 +181,8 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
#define pmd_addr_end(addr,end) (end)
#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
+#define pte_special(pte) (0)
+static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
/*
* We don't have huge page support for short descriptors, for the moment
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
index 85c60ad..b286ba9 100644
--- a/arch/arm/include/asm/pgtable-3level.h
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -207,6 +207,14 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
#define pte_huge(pte) (pte_val(pte) && !(pte_val(pte) & PTE_TABLE_BIT))
#define pte_mkhuge(pte) (__pte(pte_val(pte) & ~PTE_TABLE_BIT))
+#define pte_special(pte) (!!(pte_val(pte) & L_PTE_SPECIAL))
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+ pte_val(pte) |= L_PTE_SPECIAL;
+ return pte;
+}
+#define __HAVE_ARCH_PTE_SPECIAL
+
#define pmd_young(pmd) (pmd_val(pmd) & PMD_SECT_AF)
#define __HAVE_ARCH_PMD_WRITE
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 7d59b52..e6139e3 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -220,7 +220,6 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY)
#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG)
#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN))
-#define pte_special(pte) (0)
#define pte_present_user(pte) (pte_present(pte) && (pte_val(pte) & L_PTE_USER))
@@ -238,7 +237,8 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
unsigned long ext = 0;
if (addr < TASK_SIZE && pte_present_user(pteval)) {
- __sync_icache_dcache(pteval);
+ if (!pte_special(pteval))
+ __sync_icache_dcache(pteval);
ext |= PTE_EXT_NG;
}
@@ -257,8 +257,6 @@ PTE_BIT_FUNC(mkyoung, |= L_PTE_YOUNG);
PTE_BIT_FUNC(mkexec, &= ~L_PTE_XN);
PTE_BIT_FUNC(mknexec, |= L_PTE_XN);
-static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
-
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
const pteval_t mask = L_PTE_XN | L_PTE_RDONLY | L_PTE_USER |
--
1.8.1.4
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2014-03-28 15:01 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-28 15:01 [RFC PATCH V4 0/7] get_user_pages_fast for ARM and ARM64 Steve Capper
2014-03-28 15:01 ` [RFC PATCH V4 1/7] mm: Introduce a general RCU get_user_pages_fast Steve Capper
2014-03-28 15:01 ` Steve Capper [this message]
2014-03-28 15:01 ` [RFC PATCH V4 3/7] arm: mm: Enable HAVE_RCU_TABLE_FREE logic Steve Capper
2014-05-01 11:11 ` Catalin Marinas
2014-05-01 11:44 ` Steve Capper
2014-03-28 15:01 ` [RFC PATCH V4 4/7] arm: mm: Enable RCU fast_gup Steve Capper
2014-03-28 15:01 ` [RFC PATCH V4 5/7] arm64: Convert asm/tlb.h to generic mmu_gather Steve Capper
2014-03-28 15:01 ` [RFC PATCH V4 6/7] arm64: mm: Enable HAVE_RCU_TABLE_FREE logic Steve Capper
2014-04-30 15:20 ` Catalin Marinas
2014-04-30 15:33 ` Catalin Marinas
2014-04-30 15:38 ` Steve Capper
2014-04-30 17:21 ` Catalin Marinas
2014-05-01 7:34 ` Steve Capper
2014-05-01 9:52 ` Catalin Marinas
2014-05-01 9:57 ` Peter Zijlstra
2014-05-01 10:04 ` Catalin Marinas
2014-05-01 10:15 ` Steve Capper
2014-03-28 15:01 ` [RFC PATCH V4 7/7] arm64: mm: Enable RCU fast_gup Steve Capper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1396018892-6773-3-git-send-email-steve.capper@linaro.org \
--to=steve.capper@linaro.org \
--cc=akpm@linux-foundation.org \
--cc=anders.roxell@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=gary.robertson@linaro.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mm@kvack.org \
--cc=linux@arm.linux.org.uk \
--cc=peterz@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).