From: Steve Capper <steve.capper@linaro.org>
To: linux-arm-kernel@lists.infradead.org, catalin.marinas@arm.com,
linux@arm.linux.org.uk, linux-arch@vger.kernel.org,
linux-mm@kvack.org
Cc: will.deacon@arm.com, gary.robertson@linaro.org,
christoffer.dall@linaro.org, peterz@infradead.org,
anders.roxell@linaro.org, akpm@linux-foundation.org,
Steve Capper <steve.capper@linaro.org>
Subject: [RFC PATCH V5 4/6] arm: mm: Enable RCU fast_gup
Date: Tue, 6 May 2014 16:30:07 +0100 [thread overview]
Message-ID: <1399390209-1756-5-git-send-email-steve.capper@linaro.org> (raw)
In-Reply-To: <1399390209-1756-1-git-send-email-steve.capper@linaro.org>
Activate the RCU fast_gup for ARM. We also need to force THP splits to
broadcast an IPI s.t. we block in the fast_gup page walker. As THP
splits are comparatively rare, this should not lead to a noticeable
performance degradation.
Signed-off-by: Steve Capper <steve.capper@linaro.org>
---
arch/arm/Kconfig | 3 +++
arch/arm/include/asm/pgtable-3level.h | 6 ++++++
arch/arm/mm/flush.c | 19 +++++++++++++++++++
3 files changed, 28 insertions(+)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6cfdb3b..d0572f1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1803,6 +1803,9 @@ config ARCH_SELECT_MEMORY_MODEL
config HAVE_ARCH_PFN_VALID
def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
+config HAVE_RCU_GUP
+ def_bool y
+
config HIGHMEM
bool "High Memory Support"
depends on MMU
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
index b286ba9..fdc4a4f 100644
--- a/arch/arm/include/asm/pgtable-3level.h
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -226,6 +226,12 @@ static inline pte_t pte_mkspecial(pte_t pte)
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
#define pmd_trans_huge(pmd) (pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT))
#define pmd_trans_splitting(pmd) (pmd_val(pmd) & PMD_SECT_SPLITTING)
+
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+#define __HAVE_ARCH_PMDP_SPLITTING_FLUSH
+void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
+ pmd_t *pmdp);
+#endif
#endif
#define PMD_BIT_FUNC(fn,op) \
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 3387e60..91a2b59 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -377,3 +377,22 @@ void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned l
*/
__cpuc_flush_dcache_area(page_address(page), PAGE_SIZE);
}
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+static void thp_splitting_flush_sync(void *arg)
+{
+}
+
+void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
+ pmd_t *pmdp)
+{
+ pmd_t pmd = pmd_mksplitting(*pmdp);
+ VM_BUG_ON(address & ~PMD_MASK);
+ set_pmd_at(vma->vm_mm, address, pmdp, pmd);
+
+ /* dummy IPI to serialise against fast_gup */
+ smp_call_function(thp_splitting_flush_sync, NULL, 1);
+}
+#endif /* CONFIG_HAVE_RCU_TABLE_FREE */
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
--
1.8.1.4
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2014-05-06 15:30 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-06 15:30 [RFC PATCH V5 0/6] get_user_pages_fast for ARM and ARM64 Steve Capper
2014-05-06 15:30 ` [RFC PATCH V5 1/6] mm: Introduce a general RCU get_user_pages_fast Steve Capper
2014-05-06 15:30 ` [RFC PATCH V5 2/6] arm: mm: Introduce special ptes for LPAE Steve Capper
2014-05-06 15:30 ` [RFC PATCH V5 3/6] arm: mm: Enable HAVE_RCU_TABLE_FREE logic Steve Capper
2014-05-06 15:30 ` Steve Capper [this message]
2014-05-13 15:31 ` [RFC PATCH V5 4/6] arm: mm: Enable RCU fast_gup Christopher Covington
2014-05-14 8:34 ` Steve Capper
2014-05-06 15:30 ` [RFC PATCH V5 5/6] arm64: mm: Enable HAVE_RCU_TABLE_FREE logic Steve Capper
2014-05-06 15:30 ` [RFC PATCH V5 6/6] arm64: mm: Enable RCU fast_gup Steve Capper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1399390209-1756-5-git-send-email-steve.capper@linaro.org \
--to=steve.capper@linaro.org \
--cc=akpm@linux-foundation.org \
--cc=anders.roxell@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=christoffer.dall@linaro.org \
--cc=gary.robertson@linaro.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mm@kvack.org \
--cc=linux@arm.linux.org.uk \
--cc=peterz@infradead.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).