linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Steve Capper <steve.capper@linaro.org>
To: linux-arm-kernel@lists.infradead.org, catalin.marinas@arm.com,
	linux@arm.linux.org.uk, linux-arch@vger.kernel.org,
	linux-mm@kvack.org
Cc: will.deacon@arm.com, gary.robertson@linaro.org,
	christoffer.dall@linaro.org, peterz@infradead.org,
	anders.roxell@linaro.org, akpm@linux-foundation.org,
	Steve Capper <steve.capper@linaro.org>
Subject: [PATCH 4/6] arm: mm: Enable RCU fast_gup
Date: Wed, 25 Jun 2014 16:40:22 +0100	[thread overview]
Message-ID: <1403710824-24340-5-git-send-email-steve.capper@linaro.org> (raw)
In-Reply-To: <1403710824-24340-1-git-send-email-steve.capper@linaro.org>

Activate the RCU fast_gup for ARM. We also need to force THP splits to
broadcast an IPI s.t. we block in the fast_gup page walker. As THP
splits are comparatively rare, this should not lead to a noticeable
performance degradation.

Some pre-requisite functions pud_write and pud_page are also added.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
---
 arch/arm/Kconfig                      |  4 ++++
 arch/arm/include/asm/pgtable-3level.h |  8 ++++++++
 arch/arm/mm/flush.c                   | 19 +++++++++++++++++++
 3 files changed, 31 insertions(+)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 888bc8a..6d86ff6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1712,6 +1712,10 @@ config ARCH_SELECT_MEMORY_MODEL
 config HAVE_ARCH_PFN_VALID
 	def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
 
+config HAVE_RCU_GUP
+	def_bool y
+	depends on ARM_LPAE
+
 config HIGHMEM
 	bool "High Memory Support"
 	depends on MMU
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
index b286ba9..fa8dcb2 100644
--- a/arch/arm/include/asm/pgtable-3level.h
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -219,6 +219,8 @@ static inline pte_t pte_mkspecial(pte_t pte)
 
 #define __HAVE_ARCH_PMD_WRITE
 #define pmd_write(pmd)		(!(pmd_val(pmd) & PMD_SECT_RDONLY))
+#define pud_write(pud)		(0)
+#define pud_page(pud)		pmd_page(__pmd(pud_val(pud)))
 
 #define pmd_hugewillfault(pmd)	(!pmd_young(pmd) || !pmd_write(pmd))
 #define pmd_thp_or_huge(pmd)	(pmd_huge(pmd) || pmd_trans_huge(pmd))
@@ -226,6 +228,12 @@ static inline pte_t pte_mkspecial(pte_t pte)
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #define pmd_trans_huge(pmd)	(pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT))
 #define pmd_trans_splitting(pmd) (pmd_val(pmd) & PMD_SECT_SPLITTING)
+
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+#define __HAVE_ARCH_PMDP_SPLITTING_FLUSH
+void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
+			  pmd_t *pmdp);
+#endif
 #endif
 
 #define PMD_BIT_FUNC(fn,op) \
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 43d54f5..9422820 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -400,3 +400,22 @@ void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned l
 	 */
 	__cpuc_flush_dcache_area(page_address(page), PAGE_SIZE);
 }
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+static void thp_splitting_flush_sync(void *arg)
+{
+}
+
+void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
+			  pmd_t *pmdp)
+{
+	pmd_t pmd = pmd_mksplitting(*pmdp);
+	VM_BUG_ON(address & ~PMD_MASK);
+	set_pmd_at(vma->vm_mm, address, pmdp, pmd);
+
+	/* dummy IPI to serialise against fast_gup */
+	smp_call_function(thp_splitting_flush_sync, NULL, 1);
+}
+#endif /* CONFIG_HAVE_RCU_TABLE_FREE */
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
-- 
1.9.3

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2014-06-25 15:40 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-25 15:40 [PATCH 0/6] RCU get_user_pages_fast and __get_user_pages_fast Steve Capper
2014-06-25 15:40 ` [PATCH 1/6] mm: Introduce a general RCU get_user_pages_fast Steve Capper
2014-06-25 15:40 ` [PATCH 2/6] arm: mm: Introduce special ptes for LPAE Steve Capper
2014-06-27 12:17   ` Will Deacon
2014-06-27 12:44     ` Steve Capper
2014-06-25 15:40 ` [PATCH 3/6] arm: mm: Enable HAVE_RCU_TABLE_FREE logic Steve Capper
2014-06-25 15:40 ` Steve Capper [this message]
2014-06-25 15:40 ` [PATCH 5/6] arm64: " Steve Capper
2014-06-25 15:40 ` [PATCH 6/6] arm64: mm: Enable RCU fast_gup Steve Capper
2014-06-25 16:50   ` Mark Rutland
2014-06-26  7:56     ` Peter Zijlstra
2014-06-27 12:20       ` Will Deacon
2014-06-25 20:42 ` [PATCH 0/6] RCU get_user_pages_fast and __get_user_pages_fast Andrew Morton
2014-06-26  7:53   ` Peter Zijlstra
2014-08-20 14:56 ` Dann Frazier
2014-08-20 15:11   ` Steve Capper

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1403710824-24340-5-git-send-email-steve.capper@linaro.org \
    --to=steve.capper@linaro.org \
    --cc=akpm@linux-foundation.org \
    --cc=anders.roxell@linaro.org \
    --cc=catalin.marinas@arm.com \
    --cc=christoffer.dall@linaro.org \
    --cc=gary.robertson@linaro.org \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mm@kvack.org \
    --cc=linux@arm.linux.org.uk \
    --cc=peterz@infradead.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).