linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Steve Capper <steve.capper@linaro.org>
To: linux-arm-kernel@lists.infradead.org, catalin.marinas@arm.com,
	linux@arm.linux.org.uk, linux-arch@vger.kernel.org,
	linux-mm@kvack.org
Cc: will.deacon@arm.com, gary.robertson@linaro.org,
	christoffer.dall@linaro.org, peterz@infradead.org,
	anders.roxell@linaro.org, akpm@linux-foundation.org,
	Steve Capper <steve.capper@linaro.org>
Subject: [PATCH 6/6] arm64: mm: Enable RCU fast_gup
Date: Wed, 25 Jun 2014 16:40:24 +0100	[thread overview]
Message-ID: <1403710824-24340-7-git-send-email-steve.capper@linaro.org> (raw)
In-Reply-To: <1403710824-24340-1-git-send-email-steve.capper@linaro.org>

Activate the RCU fast_gup for ARM64. We also need to force THP splits
to broadcast an IPI s.t. we block in the fast_gup page walker. As THP
splits are comparatively rare, this should not lead to a noticeable
performance degradation.

Some pre-requisite functions pud_write and pud_page are also added.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
---
 arch/arm64/Kconfig               |  3 +++
 arch/arm64/include/asm/pgtable.h | 11 ++++++++++-
 arch/arm64/mm/flush.c            | 19 +++++++++++++++++++
 3 files changed, 32 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index e1d2eef..d6fcb8e 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -102,6 +102,9 @@ config GENERIC_CALIBRATE_DELAY
 config ZONE_DMA
 	def_bool y
 
+config HAVE_RCU_GUP
+	def_bool y
+
 config ARCH_DMA_ADDR_T_64BIT
 	def_bool y
 
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index e0ccceb..62510f7 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -237,7 +237,13 @@ static inline pmd_t pte_pmd(pte_t pte)
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #define pmd_trans_huge(pmd)	(pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT))
 #define pmd_trans_splitting(pmd)	pte_special(pmd_pte(pmd))
-#endif
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+#define __HAVE_ARCH_PMDP_SPLITTING_FLUSH
+struct vm_area_struct;
+void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
+			  pmd_t *pmdp);
+#endif /* CONFIG_HAVE_RCU_TABLE_FREE */
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
 #define pmd_young(pmd)		pte_young(pmd_pte(pmd))
 #define pmd_wrprotect(pmd)	pte_pmd(pte_wrprotect(pmd_pte(pmd)))
@@ -258,6 +264,7 @@ static inline pmd_t pte_pmd(pte_t pte)
 #define mk_pmd(page,prot)	pfn_pmd(page_to_pfn(page),prot)
 
 #define pmd_page(pmd)           pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK))
+#define pud_write(pud)		pmd_write(__pmd(pud_val(pud)))
 #define pud_pfn(pud)		(((pud_val(pud) & PUD_MASK) & PHYS_MASK) >> PAGE_SHIFT)
 
 #define set_pmd_at(mm, addr, pmdp, pmd)	set_pte_at(mm, addr, (pte_t *)pmdp, pmd_pte(pmd))
@@ -345,6 +352,8 @@ static inline pmd_t *pud_page_vaddr(pud_t pud)
 	return __va(pud_val(pud) & PHYS_MASK & (s32)PAGE_MASK);
 }
 
+#define pud_page(pud)           pmd_page(__pmd(pud_val(pud)))
+
 #endif	/* CONFIG_ARM64_64K_PAGES */
 
 /* to find an entry in a page-table-directory */
diff --git a/arch/arm64/mm/flush.c b/arch/arm64/mm/flush.c
index e4193e3..ddf96c1 100644
--- a/arch/arm64/mm/flush.c
+++ b/arch/arm64/mm/flush.c
@@ -103,3 +103,22 @@ EXPORT_SYMBOL(flush_dcache_page);
  */
 EXPORT_SYMBOL(flush_cache_all);
 EXPORT_SYMBOL(flush_icache_range);
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+static void thp_splitting_flush_sync(void *arg)
+{
+}
+
+void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
+			  pmd_t *pmdp)
+{
+	pmd_t pmd = pmd_mksplitting(*pmdp);
+	VM_BUG_ON(address & ~PMD_MASK);
+	set_pmd_at(vma->vm_mm, address, pmdp, pmd);
+
+	/* dummy IPI to serialise against fast_gup */
+	smp_call_function(thp_splitting_flush_sync, NULL, 1);
+}
+#endif /* CONFIG_HAVE_RCU_TABLE_FREE */
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
-- 
1.9.3

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2014-06-25 15:40 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-25 15:40 [PATCH 0/6] RCU get_user_pages_fast and __get_user_pages_fast Steve Capper
2014-06-25 15:40 ` [PATCH 1/6] mm: Introduce a general RCU get_user_pages_fast Steve Capper
2014-06-25 15:40 ` [PATCH 2/6] arm: mm: Introduce special ptes for LPAE Steve Capper
2014-06-27 12:17   ` Will Deacon
2014-06-27 12:44     ` Steve Capper
2014-06-25 15:40 ` [PATCH 3/6] arm: mm: Enable HAVE_RCU_TABLE_FREE logic Steve Capper
2014-06-25 15:40 ` [PATCH 4/6] arm: mm: Enable RCU fast_gup Steve Capper
2014-06-25 15:40 ` [PATCH 5/6] arm64: mm: Enable HAVE_RCU_TABLE_FREE logic Steve Capper
2014-06-25 15:40 ` Steve Capper [this message]
2014-06-25 16:50   ` [PATCH 6/6] arm64: mm: Enable RCU fast_gup Mark Rutland
2014-06-26  7:56     ` Peter Zijlstra
2014-06-27 12:20       ` Will Deacon
2014-06-25 20:42 ` [PATCH 0/6] RCU get_user_pages_fast and __get_user_pages_fast Andrew Morton
2014-06-26  7:53   ` Peter Zijlstra
2014-08-20 14:56 ` Dann Frazier
2014-08-20 15:11   ` Steve Capper

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1403710824-24340-7-git-send-email-steve.capper@linaro.org \
    --to=steve.capper@linaro.org \
    --cc=akpm@linux-foundation.org \
    --cc=anders.roxell@linaro.org \
    --cc=catalin.marinas@arm.com \
    --cc=christoffer.dall@linaro.org \
    --cc=gary.robertson@linaro.org \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mm@kvack.org \
    --cc=linux@arm.linux.org.uk \
    --cc=peterz@infradead.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).