From: Akinobu Mita <akinobu.mita@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Akinobu Mita <akinobu.mita@gmail.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
x86@kernel.org, linux-mm@kvack.org
Subject: [PATCH v2 3/3] x86: use __memblock_alloc_base() and memblock_alloc_base()
Date: Tue, 9 Sep 2014 08:38:04 +0900 [thread overview]
Message-ID: <1410219484-8038-3-git-send-email-akinobu.mita@gmail.com> (raw)
In-Reply-To: <1410219484-8038-1-git-send-email-akinobu.mita@gmail.com>
__memblock_alloc_base() is equivalent to memblock_find_in_range() with
the range starting from 0 and subsequent memblock_reserve() call.
memblock_alloc_base() is similar to __memblock_alloc_base(), but it
calls panic if the allocation fails. Convert to use these functions
where possible.
This is mainly a cleanup. Also, memblock_alloc_base() and its variants
call kmemleak_alloc() for allocated memory block with min_count of 0, so
that it is never reported as leaks.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-mm@kvack.org
---
* v2: split from membloc_alloc_range() conversions, and avoid unexpected
panic on allocation failure.
arch/x86/kernel/setup.c | 9 ++-------
arch/x86/mm/numa.c | 4 +---
arch/x86/mm/numa_emulation.c | 5 ++---
arch/x86/realmode/init.c | 5 +----
4 files changed, 6 insertions(+), 17 deletions(-)
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 7d32406..d3b1da5 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -327,16 +327,11 @@ static void __init relocate_initrd(void)
char *p, *q;
/* We need to move the initrd down into directly mapped mem */
- relocated_ramdisk = memblock_find_in_range(0, PFN_PHYS(max_pfn_mapped),
- area_size, PAGE_SIZE);
-
- if (!relocated_ramdisk)
- panic("Cannot find place for new RAMDISK of size %lld\n",
- ramdisk_size);
+ relocated_ramdisk = memblock_alloc_base(area_size, PAGE_SIZE,
+ PFN_PHYS(max_pfn_mapped));
/* Note: this includes all the mem currently occupied by
the initrd, we rely on that fact to keep the data intact. */
- memblock_reserve(relocated_ramdisk, area_size);
initrd_start = relocated_ramdisk + PAGE_OFFSET;
initrd_end = initrd_start + ramdisk_size;
printk(KERN_INFO "Allocated new RAMDISK: [mem %#010llx-%#010llx]\n",
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index a32b706..5deaa9b 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -375,15 +375,13 @@ static int __init numa_alloc_distance(void)
cnt++;
size = cnt * cnt * sizeof(numa_distance[0]);
- phys = memblock_find_in_range(0, PFN_PHYS(max_pfn_mapped),
- size, PAGE_SIZE);
+ phys = __memblock_alloc_base(size, PAGE_SIZE, PFN_PHYS(max_pfn_mapped));
if (!phys) {
pr_warning("NUMA: Warning: can't allocate distance table!\n");
/* don't retry until explicitly reset */
numa_distance = (void *)1LU;
return -ENOMEM;
}
- memblock_reserve(phys, size);
numa_distance = __va(phys);
numa_distance_cnt = cnt;
diff --git a/arch/x86/mm/numa_emulation.c b/arch/x86/mm/numa_emulation.c
index a8f90ce..4dc3405 100644
--- a/arch/x86/mm/numa_emulation.c
+++ b/arch/x86/mm/numa_emulation.c
@@ -357,13 +357,12 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt)
if (numa_dist_cnt) {
u64 phys;
- phys = memblock_find_in_range(0, PFN_PHYS(max_pfn_mapped),
- phys_size, PAGE_SIZE);
+ phys = __memblock_alloc_base(phys_size, PAGE_SIZE,
+ PFN_PHYS(max_pfn_mapped));
if (!phys) {
pr_warning("NUMA: Warning: can't allocate copy of distance table, disabling emulation\n");
goto no_emu;
}
- memblock_reserve(phys, phys_size);
phys_dist = __va(phys);
for (i = 0; i < numa_dist_cnt; i++)
diff --git a/arch/x86/realmode/init.c b/arch/x86/realmode/init.c
index bad628a..c6c212a 100644
--- a/arch/x86/realmode/init.c
+++ b/arch/x86/realmode/init.c
@@ -15,12 +15,9 @@ void __init reserve_real_mode(void)
size_t size = PAGE_ALIGN(real_mode_blob_end - real_mode_blob);
/* Has to be under 1M so we can execute real-mode AP code. */
- mem = memblock_find_in_range(0, 1<<20, size, PAGE_SIZE);
- if (!mem)
- panic("Cannot allocate trampoline\n");
+ mem = memblock_alloc_base(size, PAGE_SIZE, 1 << 20);
base = __va(mem);
- memblock_reserve(mem, size);
real_mode_header = (struct real_mode_header *) base;
printk(KERN_DEBUG "Base memory trampoline at [%p] %llx size %zu\n",
base, (unsigned long long)mem, size);
--
1.9.1
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
prev parent reply other threads:[~2014-09-08 23:38 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-08 23:38 [PATCH v2 1/3] mm: use memblock_alloc_range_nid() and memblock_alloc_range() Akinobu Mita
2014-09-08 23:38 ` [PATCH v2 2/3] x86: use memblock_alloc_range() Akinobu Mita
2014-09-08 23:38 ` Akinobu Mita [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1410219484-8038-3-git-send-email-akinobu.mita@gmail.com \
--to=akinobu.mita@gmail.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).