From: Toshi Kani <toshi.kani@hp.com>
To: hpa@zytor.com, tglx@linutronix.de, mingo@redhat.com,
akpm@linux-foundation.org, arnd@arndb.de
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
jgross@suse.com, stefan.bader@canonical.com, luto@amacapital.net,
hmh@hmh.eng.br, yigal@plexistor.com, konrad.wilk@oracle.com,
Toshi Kani <toshi.kani@hp.com>
Subject: [PATCH v3 1/5] x86, mm, pat: Set WT to PA7 slot of PAT MSR
Date: Wed, 17 Sep 2014 13:48:37 -0600 [thread overview]
Message-ID: <1410983321-15162-2-git-send-email-toshi.kani@hp.com> (raw)
In-Reply-To: <1410983321-15162-1-git-send-email-toshi.kani@hp.com>
This patch sets WT to the PA7 slot in the PAT MSR when the processor
is not affected by the PAT errata. The PA7 slot is chosen to further
minimize the risk of using the PAT bit as the PA3 slot is UC and is
not currently used.
The following Intel processors are affected by the PAT errata.
errata cpuid
----------------------------------------------------
Pentium 2, A52 family 0x6, model 0x5
Pentium 3, E27 family 0x6, model 0x7, 0x8
Pentium 3 Xenon, G26 family 0x6, model 0x7, 0x8, 0xa
Pentium M, Y26 family 0x6, model 0x9
Pentium M 90nm, X9 family 0x6, model 0xd
Pentium 4, N46 family 0xf, model 0x0
Instead of making sharp boundary checks, this patch makes conservative
checks to exclude all Pentium 2, 3, M and 4 family processors. For
such processors, _PAGE_CACHE_MODE_WT is redirected to UC- per the
default setup in __cachemode2pte_tbl[].
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
---
arch/x86/mm/pat.c | 64 +++++++++++++++++++++++++++++++++++++++++------------
1 file changed, 49 insertions(+), 15 deletions(-)
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index ff31851..db687c3 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -133,6 +133,7 @@ void pat_init(void)
{
u64 pat;
bool boot_cpu = !boot_pat_state;
+ struct cpuinfo_x86 *c = &boot_cpu_data;
if (!pat_enabled)
return;
@@ -153,21 +154,54 @@ void pat_init(void)
}
}
- /* Set PWT to Write-Combining. All other bits stay the same */
- /*
- * PTE encoding used in Linux:
- * PAT
- * |PCD
- * ||PWT
- * |||
- * 000 WB _PAGE_CACHE_WB
- * 001 WC _PAGE_CACHE_WC
- * 010 UC- _PAGE_CACHE_UC_MINUS
- * 011 UC _PAGE_CACHE_UC
- * PAT bit unused
- */
- pat = PAT(0, WB) | PAT(1, WC) | PAT(2, UC_MINUS) | PAT(3, UC) |
- PAT(4, WB) | PAT(5, WC) | PAT(6, UC_MINUS) | PAT(7, UC);
+ if ((c->x86_vendor == X86_VENDOR_INTEL) &&
+ (((c->x86 == 0x6) && (c->x86_model <= 0xd)) ||
+ ((c->x86 == 0xf) && (c->x86_model <= 0x6)))) {
+ /*
+ * PAT support with the lower four entries. Intel Pentium 2,
+ * 3, M, and 4 are affected by PAT errata, which makes the
+ * upper four entries unusable. We do not use the upper four
+ * entries for all the affected processor families for safe.
+ *
+ * PTE encoding used in Linux:
+ * PAT
+ * |PCD
+ * ||PWT PAT
+ * ||| slot
+ * 000 0 WB : _PAGE_CACHE_MODE_WB
+ * 001 1 WC : _PAGE_CACHE_MODE_WC
+ * 010 2 UC-: _PAGE_CACHE_MODE_UC_MINUS
+ * 011 3 UC : _PAGE_CACHE_MODE_UC
+ * PAT bit unused
+ *
+ * NOTE: When WT or WP is used, it is redirected to UC- per
+ * the default setup in __cachemode2pte_tbl[].
+ */
+ pat = PAT(0, WB) | PAT(1, WC) | PAT(2, UC_MINUS) | PAT(3, UC) |
+ PAT(4, WB) | PAT(5, WC) | PAT(6, UC_MINUS) | PAT(7, UC);
+ } else {
+ /*
+ * PAT full support. WT is set to slot 7, which minimizes
+ * the risk of using the PAT bit as slot 3 is UC and is
+ * currently unused. Slot 4 should remain as reserved.
+ *
+ * PTE encoding used in Linux:
+ * PAT
+ * |PCD
+ * ||PWT PAT
+ * ||| slot
+ * 000 0 WB : _PAGE_CACHE_MODE_WB
+ * 001 1 WC : _PAGE_CACHE_MODE_WC
+ * 010 2 UC-: _PAGE_CACHE_MODE_UC_MINUS
+ * 011 3 UC : _PAGE_CACHE_MODE_UC
+ * 100 4 <reserved>
+ * 101 5 <reserved>
+ * 110 6 <reserved>
+ * 111 7 WT : _PAGE_CACHE_MODE_WT
+ */
+ pat = PAT(0, WB) | PAT(1, WC) | PAT(2, UC_MINUS) | PAT(3, UC) |
+ PAT(4, WB) | PAT(5, WC) | PAT(6, UC_MINUS) | PAT(7, WT);
+ }
/* Boot CPU check */
if (!boot_pat_state)
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2014-09-17 19:59 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-17 19:48 [PATCH v3 0/5] Support Write-Through mapping on x86 Toshi Kani
2014-09-17 19:48 ` Toshi Kani [this message]
2014-09-23 5:46 ` [PATCH v3 1/5] x86, mm, pat: Set WT to PA7 slot of PAT MSR Juergen Gross
2014-09-17 19:48 ` [PATCH v3 2/5] x86, mm, pat: Change reserve_memtype() to handle WT Toshi Kani
2014-09-17 19:48 ` [PATCH v3 3/5] x86, mm, asm-gen: Add ioremap_wt() for WT Toshi Kani
2014-09-17 19:48 ` [PATCH v3 4/5] x86, mm, pat: Add pgprot_writethrough() " Toshi Kani
2014-09-17 19:48 ` [PATCH v3 5/5] x86, mm, pat: Refactor !pat_enabled handling Toshi Kani
2014-09-23 6:25 ` Juergen Gross
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1410983321-15162-2-git-send-email-toshi.kani@hp.com \
--to=toshi.kani@hp.com \
--cc=akpm@linux-foundation.org \
--cc=arnd@arndb.de \
--cc=hmh@hmh.eng.br \
--cc=hpa@zytor.com \
--cc=jgross@suse.com \
--cc=konrad.wilk@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=luto@amacapital.net \
--cc=mingo@redhat.com \
--cc=stefan.bader@canonical.com \
--cc=tglx@linutronix.de \
--cc=yigal@plexistor.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).