linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Mel Gorman <mgorman@suse.de>
To: Linux-MM <linux-mm@kvack.org>
Cc: Rik van Riel <riel@redhat.com>,
	Johannes Weiner <hannes@cmpxchg.org>,
	Michal Hocko <mhocko@suse.cz>,
	LKML <linux-kernel@vger.kernel.org>, Mel Gorman <mgorman@suse.de>
Subject: [PATCH 08/25] mm, vmscan: By default have direct reclaim only shrink once per node
Date: Mon,  8 Jun 2015 14:56:14 +0100	[thread overview]
Message-ID: <1433771791-30567-9-git-send-email-mgorman@suse.de> (raw)
In-Reply-To: <1433771791-30567-1-git-send-email-mgorman@suse.de>

Direct reclaim iterates over all zones in the zonelist and shrinking them
but this is in conflict with node-based reclaim. In the default case,
only shrink once per node.

Signed-off-by: Mel Gorman <mgorman@suse.de>
---
 mm/vmscan.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/mm/vmscan.c b/mm/vmscan.c
index 4d7ddaf4f2f4..50aa650ac206 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2468,14 +2468,6 @@ static inline bool compaction_ready(struct zone *zone, int order)
  * try to reclaim pages from zones which will satisfy the caller's allocation
  * request.
  *
- * We reclaim from a zone even if that zone is over high_wmark_pages(zone).
- * Because:
- * a) The caller may be trying to free *extra* pages to satisfy a higher-order
- *    allocation or
- * b) The target zone may be at high_wmark_pages(zone) but the lower zones
- *    must go *over* high_wmark_pages(zone) to satisfy the `incremental min'
- *    zone defense algorithm.
- *
  * If a zone is deemed to be full of pinned pages then just give it a light
  * scan then give up on it.
  *
@@ -2490,6 +2482,7 @@ static bool shrink_zones(struct zonelist *zonelist, struct scan_control *sc,
 	unsigned long nr_soft_scanned;
 	gfp_t orig_mask;
 	bool reclaimable = false;
+	pg_data_t *last_pgdat = NULL;
 
 	/*
 	 * If the number of buffer_heads in the machine exceeds the maximum
@@ -2502,11 +2495,18 @@ static bool shrink_zones(struct zonelist *zonelist, struct scan_control *sc,
 
 	for_each_zone_zonelist_nodemask(zone, z, zonelist,
 					classzone_idx, sc->nodemask) {
-		if (!populated_zone(zone)) {
-			reclaim_idx--;
-			classzone_idx--;
+		BUG_ON(!populated_zone(zone));
+
+		/*
+		 * Shrink each node in the zonelist once. If the zonelist is
+		 * ordered by zone (not the default) then a node may be
+		 * shrunk multiple times but in that case the user prefers
+		 * lower zones being preserved
+		 */
+		if (zone->zone_pgdat == last_pgdat)
 			continue;
-		}
+		last_pgdat = zone->zone_pgdat;
+		reclaim_idx = zone_idx(zone);
 
 		/*
 		 * Take care memory controller reclaiming has small influence
-- 
2.3.5

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2015-06-08 13:56 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-08 13:56 [RFC PATCH 00/25] Move LRU page reclaim from zones to nodes Mel Gorman
2015-06-08 13:56 ` [PATCH 01/25] mm, vmstat: Add infrastructure for per-node vmstats Mel Gorman
2015-06-08 13:56 ` [PATCH 02/25] mm, vmscan: Move lru_lock to the node Mel Gorman
2015-06-08 13:56 ` [PATCH 03/25] mm, vmscan: Move LRU lists to node Mel Gorman
2015-06-08 13:56 ` [PATCH 04/25] mm, vmscan: Begin reclaiming pages on a per-node basis Mel Gorman
2015-06-08 13:56 ` [PATCH 05/25] mm, vmscan: Have kswapd only scan based on the highest requested zone Mel Gorman
2015-06-08 13:56 ` [PATCH 06/25] mm, vmscan: Avoid a second search through zones checking if compaction is required Mel Gorman
2015-06-08 13:56 ` [PATCH 07/25] mm, vmscan: Make kswapd think of reclaim in terms of nodes Mel Gorman
2015-06-08 13:56 ` Mel Gorman [this message]
2015-06-08 13:56 ` [PATCH 09/25] mm, vmscan: Clear congestion, dirty and need for compaction on a per-node basis Mel Gorman
2015-06-08 13:56 ` [PATCH 10/25] mm, vmscan: Make shrink_node decisions more node-centric Mel Gorman
2015-06-08 13:56 ` [PATCH 11/25] mm, workingset: Make working set detection node-aware Mel Gorman
2015-06-08 13:56 ` [PATCH 12/25] mm, page_alloc: Consider dirtyable memory in terms of nodes Mel Gorman
2015-06-08 13:56 ` [PATCH 13/25] mm: Move NR_FILE_MAPPED accounting to the node Mel Gorman
2015-06-08 13:56 ` [PATCH 14/25] mm: Rename NR_ANON_PAGES to NR_ANON_MAPPED Mel Gorman
2015-06-08 13:56 ` [PATCH 15/25] mm: Move most file-based accounting to the node Mel Gorman
2015-06-08 13:56 ` [PATCH 16/25] mm, vmscan: Update classzone_idx if buffer_heads_over_limit Mel Gorman
2015-06-08 13:56 ` [PATCH 17/25] mm, vmscan: Check if cpusets are enabled during direct reclaim Mel Gorman
2015-06-08 13:56 ` [PATCH 18/25] mm, vmscan: Only wakeup kswapd once per node for the requested classzone Mel Gorman
2015-06-08 13:56 ` [PATCH 19/25] mm, vmscan: Account in vmstat for pages skipped during reclaim Mel Gorman
2015-06-08 13:56 ` [PATCH 20/25] mm, page_alloc: Remove fair zone allocation policy Mel Gorman
2015-06-08 13:56 ` [PATCH 21/25] mm, page_alloc: Defer zlc_setup until it is known it is required Mel Gorman
2015-06-08 13:56 ` [PATCH 22/25] mm: Convert zone_reclaim to node_reclaim Mel Gorman
2015-06-08 13:56 ` [PATCH 23/25] mm, page_alloc: Delete the zonelist_cache Mel Gorman
2015-06-08 13:56 ` [PATCH 24/25] mm, page_alloc: Use ac->classzone_idx instead of zone_idx(preferred_zone) Mel Gorman
2015-06-08 13:56 ` [PATCH 25/25] mm: page_alloc: Take fewer passes when allocating to the low watermark Mel Gorman
2015-06-19 17:01 ` [RFC PATCH 00/25] Move LRU page reclaim from zones to nodes Johannes Weiner
2015-06-21 14:04   ` Mel Gorman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1433771791-30567-9-git-send-email-mgorman@suse.de \
    --to=mgorman@suse.de \
    --cc=hannes@cmpxchg.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@suse.cz \
    --cc=riel@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).