linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Mel Gorman <mgorman@suse.de>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Nicolai Stange <nicstange@gmail.com>,
	Peter Zijlstra <peterz@infradead.org>,
	Dave Hansen <dave.hansen@intel.com>,
	Alex Ng <alexng@microsoft.com>,
	Fengguang Wu <fengguang.wu@intel.com>,
	Linux-MM <linux-mm@kvack.org>,
	LKML <linux-kernel@vger.kernel.org>, Mel Gorman <mgorman@suse.de>
Subject: [PATCH 1/3] mm, meminit: replace rwsem with completion
Date: Fri, 17 Jul 2015 13:22:02 +0100	[thread overview]
Message-ID: <1437135724-20110-2-git-send-email-mgorman@suse.de> (raw)
In-Reply-To: <1437135724-20110-1-git-send-email-mgorman@suse.de>

From: Nicolai Stange <nicstange@gmail.com>

Commit 0e1cc95b4cc7 ("mm: meminit: finish initialisation of struct pages
before basic setup") introduced a rwsem to signal completion of the
initialization workers.

Lockdep complains about possible recursive locking:
  =============================================
  [ INFO: possible recursive locking detected ]
  4.1.0-12802-g1dc51b8 #3 Not tainted
  ---------------------------------------------
  swapper/0/1 is trying to acquire lock:
  (pgdat_init_rwsem){++++.+},
    at: [<ffffffff8424c7fb>] page_alloc_init_late+0xc7/0xe6

  but task is already holding lock:
  (pgdat_init_rwsem){++++.+},
    at: [<ffffffff8424c772>] page_alloc_init_late+0x3e/0xe6

Replace the rwsem by a completion together with an atomic
"outstanding work counter".

[peterz@infradead.org: Barrier removal on the grounds of being pointless]
[mgorman@suse.de: Applied review feedback]
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
---
 mm/page_alloc.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 506eac8b38af..a69e78c396a0 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -18,7 +18,6 @@
 #include <linux/mm.h>
 #include <linux/swap.h>
 #include <linux/interrupt.h>
-#include <linux/rwsem.h>
 #include <linux/pagemap.h>
 #include <linux/jiffies.h>
 #include <linux/bootmem.h>
@@ -1062,7 +1061,15 @@ static void __init deferred_free_range(struct page *page,
 		__free_pages_boot_core(page, pfn, 0);
 }
 
-static __initdata DECLARE_RWSEM(pgdat_init_rwsem);
+/* Completion tracking for deferred_init_memmap() threads */
+static atomic_t pgdat_init_n_undone __initdata;
+static __initdata DECLARE_COMPLETION(pgdat_init_all_done_comp);
+
+static inline void __init pgdat_init_report_one_done(void)
+{
+	if (atomic_dec_and_test(&pgdat_init_n_undone))
+		complete(&pgdat_init_all_done_comp);
+}
 
 /* Initialise remaining memory on a node */
 static int __init deferred_init_memmap(void *data)
@@ -1079,7 +1086,7 @@ static int __init deferred_init_memmap(void *data)
 	const struct cpumask *cpumask = cpumask_of_node(pgdat->node_id);
 
 	if (first_init_pfn == ULONG_MAX) {
-		up_read(&pgdat_init_rwsem);
+		pgdat_init_report_one_done();
 		return 0;
 	}
 
@@ -1179,7 +1186,8 @@ free_range:
 
 	pr_info("node %d initialised, %lu pages in %ums\n", nid, nr_pages,
 					jiffies_to_msecs(jiffies - start));
-	up_read(&pgdat_init_rwsem);
+
+	pgdat_init_report_one_done();
 	return 0;
 }
 
@@ -1187,14 +1195,14 @@ void __init page_alloc_init_late(void)
 {
 	int nid;
 
+	/* There will be num_node_state(N_MEMORY) threads */
+	atomic_set(&pgdat_init_n_undone, num_node_state(N_MEMORY));
 	for_each_node_state(nid, N_MEMORY) {
-		down_read(&pgdat_init_rwsem);
 		kthread_run(deferred_init_memmap, NODE_DATA(nid), "pgdatinit%d", nid);
 	}
 
 	/* Block until all are initialised */
-	down_write(&pgdat_init_rwsem);
-	up_write(&pgdat_init_rwsem);
+	wait_for_completion(&pgdat_init_all_done_comp);
 }
 #endif /* CONFIG_DEFERRED_STRUCT_PAGE_INIT */
 
-- 
2.4.3

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  reply	other threads:[~2015-07-17 12:22 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-17 12:22 [PATCH 0/3] Deferred memory initialisation fixes Mel Gorman
2015-07-17 12:22 ` Mel Gorman [this message]
2015-07-17 13:12   ` [PATCH 1/3] mm, meminit: replace rwsem with completion Peter Zijlstra
2015-07-17 12:22 ` [PATCH 2/3] fs, file table: Reinit files_stat.max_files after deferred memory initialisation Mel Gorman
2015-07-17 12:22 ` [PATCH 3/3] mm, meminit: Allow early_pfn_to_nid to be used during runtime Mel Gorman
2015-07-17 13:12   ` Peter Zijlstra
2015-07-17 13:17     ` Mel Gorman
2015-07-17 13:29       ` Peter Zijlstra
2015-07-17 13:39         ` Mel Gorman
2015-07-17 13:50           ` Peter Zijlstra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1437135724-20110-2-git-send-email-mgorman@suse.de \
    --to=mgorman@suse.de \
    --cc=akpm@linux-foundation.org \
    --cc=alexng@microsoft.com \
    --cc=dave.hansen@intel.com \
    --cc=fengguang.wu@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=nicstange@gmail.com \
    --cc=peterz@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).