linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: David Vrabel <david.vrabel@citrix.com>
To: linux-kernel@vger.kernel.org, xen-devel@lists.xenproject.org
Cc: David Vrabel <david.vrabel@citrix.com>,
	linux-mm@kvack.org,
	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>,
	Boris Ostrovsky <boris.ostrovsky@oracle.com>,
	Daniel Kiper <daniel.kiper@oracle.com>
Subject: [PATCHv3 06/10] xen/balloon: only hotplug additional memory if required
Date: Thu, 30 Jul 2015 18:03:08 +0100	[thread overview]
Message-ID: <1438275792-5726-7-git-send-email-david.vrabel@citrix.com> (raw)
In-Reply-To: <1438275792-5726-1-git-send-email-david.vrabel@citrix.com>

Now that we track the total number of pages (included hotplugged
regions), it is easy to determine if more memory needs to be
hotplugged.

Add a new BP_WAIT state to signal that the balloon process needs to
wait until kicked by the memory add notifier (when the new section is
onlined by userspace).

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
---
v3:
- Return BP_WAIT if enough sections are already hotplugged.

v2:
- New BP_WAIT status after adding new memory sections.
---
 drivers/xen/balloon.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 932d232..e8b45e8 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -75,12 +75,14 @@
  * balloon_process() state:
  *
  * BP_DONE: done or nothing to do,
+ * BP_WAIT: wait to be rescheduled,
  * BP_EAGAIN: error, go to sleep,
  * BP_ECANCELED: error, balloon operation canceled.
  */
 
 enum bp_state {
 	BP_DONE,
+	BP_WAIT,
 	BP_EAGAIN,
 	BP_ECANCELED
 };
@@ -167,6 +169,9 @@ static struct page *balloon_next_page(struct page *page)
 
 static enum bp_state update_schedule(enum bp_state state)
 {
+	if (state == BP_WAIT)
+		return BP_WAIT;
+
 	if (state == BP_ECANCELED)
 		return BP_ECANCELED;
 
@@ -231,12 +236,22 @@ static void release_memory_resource(struct resource *resource)
 	kfree(resource);
 }
 
-static enum bp_state reserve_additional_memory(long credit)
+static enum bp_state reserve_additional_memory(void)
 {
+	long credit;
 	struct resource *resource;
 	int nid, rc;
 	unsigned long balloon_hotplug;
 
+	credit = balloon_stats.target_pages - balloon_stats.total_pages;
+
+	/*
+	 * Already hotplugged enough pages?  Wait for them to be
+	 * onlined.
+	 */
+	if (credit <= 0)
+		return BP_WAIT;
+
 	balloon_hotplug = round_up(credit, PAGES_PER_SECTION);
 
 	resource = additional_memory_resource(balloon_hotplug * PAGE_SIZE);
@@ -276,7 +291,7 @@ static enum bp_state reserve_additional_memory(long credit)
 
 	balloon_stats.total_pages += balloon_hotplug;
 
-	return BP_DONE;
+	return BP_WAIT;
   err:
 	release_memory_resource(resource);
 	return BP_ECANCELED;
@@ -306,7 +321,7 @@ static struct notifier_block xen_memory_nb = {
 	.priority = 0
 };
 #else
-static enum bp_state reserve_additional_memory(long credit)
+static enum bp_state reserve_additional_memory(void)
 {
 	balloon_stats.target_pages = balloon_stats.current_pages;
 	return BP_DONE;
@@ -473,7 +488,7 @@ static void balloon_process(struct work_struct *work)
 			if (balloon_is_inflated())
 				state = increase_reservation(credit);
 			else
-				state = reserve_additional_memory(credit);
+				state = reserve_additional_memory();
 		}
 
 		if (credit < 0)
-- 
2.1.4

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2015-07-30 17:04 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-30 17:03 [PATCHv3 00/10] mm, xen/balloon: memory hotplug improvements David Vrabel
2015-07-30 17:03 ` [PATCHv3 01/10] mm: memory hotplug with an existing resource David Vrabel
2015-07-31 23:15   ` Daniel Kiper
2015-08-13 10:21   ` [Xen-devel] " David Vrabel
2015-08-13 20:40     ` Andrew Morton
2015-08-16 11:41       ` Tang Chen
2015-07-30 17:03 ` [PATCHv3 02/10] xen/balloon: remove scratch page left overs David Vrabel
2015-07-30 17:03 ` [PATCHv3 03/10] x86/xen: discard RAM regions above the maximum reservation David Vrabel
2015-07-30 17:03 ` [PATCHv3 04/10] xen/balloon: find non-conflicting regions to place hotplugged memory David Vrabel
2015-07-30 17:03 ` [PATCHv3 05/10] xen/balloon: rationalize memory hotplug stats David Vrabel
2015-07-30 17:03 ` David Vrabel [this message]
2015-07-31 23:18   ` [PATCHv3 06/10] xen/balloon: only hotplug additional memory if required Daniel Kiper
2015-07-30 17:03 ` [PATCHv3 07/10] xen/balloon: make alloc_xenballoon_pages() always allocate low pages David Vrabel
2015-07-30 17:03 ` [PATCHv3 08/10] xen/balloon: use hotplugged pages for foreign mappings etc David Vrabel
2015-07-31 23:20   ` Daniel Kiper
2015-07-30 17:03 ` [PATCHv3 09/10] x86/xen: export xen_alloc_p2m_entry() David Vrabel
2015-07-31 23:22   ` Daniel Kiper
2015-07-30 17:03 ` [PATCHv3 10/10] xen/balloon: pre-allocate p2m entries for ballooned pages David Vrabel
2015-07-31 23:23   ` Daniel Kiper
2015-09-29 16:24 ` [Xen-devel] [PATCHv3 00/10] mm, xen/balloon: memory hotplug improvements David Vrabel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1438275792-5726-7-git-send-email-david.vrabel@citrix.com \
    --to=david.vrabel@citrix.com \
    --cc=boris.ostrovsky@oracle.com \
    --cc=daniel.kiper@oracle.com \
    --cc=konrad.wilk@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).