From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
To: linux-arm-kernel@lists.infradead.org, linux-mm@kvack.org,
catalin.marinas@arm.com, will.deacon@arm.com,
leif.lindholm@linaro.org, mark.rutland@arm.com,
msalter@redhat.com, akpm@linux-foundation.org
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Subject: [PATCH 1/3] mm/memblock: add MEMBLOCK_NOMAP attribute to memblock memory table
Date: Mon, 14 Sep 2015 17:55:27 +0200 [thread overview]
Message-ID: <1442246129-13930-2-git-send-email-ard.biesheuvel@linaro.org> (raw)
In-Reply-To: <1442246129-13930-1-git-send-email-ard.biesheuvel@linaro.org>
This introduces the MEMBLOCK_NOMAP attribute and the required plumbing
to make it usable as an indicator that some parts of normal memory
should not be covered by the kernel direct mapping. It is up to the
arch to actually honor the attribute when laying out this mapping,
but the memblock code itself is modified to disregard these regions
for allocations and other general use.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
include/linux/memblock.h | 8 ++++++
mm/memblock.c | 28 ++++++++++++++++++++
2 files changed, 36 insertions(+)
diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index c518eb589260..fdd6ac55c281 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -25,6 +25,7 @@ enum {
MEMBLOCK_NONE = 0x0, /* No special request */
MEMBLOCK_HOTPLUG = 0x1, /* hotpluggable region */
MEMBLOCK_MIRROR = 0x2, /* mirrored region */
+ MEMBLOCK_NOMAP = 0x4, /* don't add to kernel direct mapping */
};
struct memblock_region {
@@ -82,6 +83,7 @@ bool memblock_overlaps_region(struct memblock_type *type,
int memblock_mark_hotplug(phys_addr_t base, phys_addr_t size);
int memblock_clear_hotplug(phys_addr_t base, phys_addr_t size);
int memblock_mark_mirror(phys_addr_t base, phys_addr_t size);
+int memblock_mark_nomap(phys_addr_t base, phys_addr_t size);
ulong choose_memblock_flags(void);
/* Low level functions */
@@ -188,6 +190,11 @@ static inline bool memblock_is_mirror(struct memblock_region *m)
return m->flags & MEMBLOCK_MIRROR;
}
+static inline bool memblock_is_nomap(struct memblock_region *m)
+{
+ return m->flags & MEMBLOCK_NOMAP;
+}
+
#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
int memblock_search_pfn_nid(unsigned long pfn, unsigned long *start_pfn,
unsigned long *end_pfn);
@@ -323,6 +330,7 @@ phys_addr_t memblock_start_of_DRAM(void);
phys_addr_t memblock_end_of_DRAM(void);
void memblock_enforce_memory_limit(phys_addr_t memory_limit);
int memblock_is_memory(phys_addr_t addr);
+int memblock_is_map_memory(phys_addr_t addr);
int memblock_is_region_memory(phys_addr_t base, phys_addr_t size);
int memblock_is_reserved(phys_addr_t addr);
bool memblock_is_region_reserved(phys_addr_t base, phys_addr_t size);
diff --git a/mm/memblock.c b/mm/memblock.c
index 1c7b647e5897..bf2c8cfbc520 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -822,6 +822,17 @@ int __init_memblock memblock_mark_mirror(phys_addr_t base, phys_addr_t size)
return memblock_setclr_flag(base, size, 1, MEMBLOCK_MIRROR);
}
+/**
+ * memblock_mark_nomap - Mark a memory region with flag MEMBLOCK_NOMAP.
+ * @base: the base phys addr of the region
+ * @size: the size of the region
+ *
+ * Return 0 on success, -errno on failure.
+ */
+int __init_memblock memblock_mark_nomap(phys_addr_t base, phys_addr_t size)
+{
+ return memblock_setclr_flag(base, size, 1, MEMBLOCK_NOMAP);
+}
/**
* __next_reserved_mem_region - next function for for_each_reserved_region()
@@ -913,6 +924,10 @@ void __init_memblock __next_mem_range(u64 *idx, int nid, ulong flags,
if ((flags & MEMBLOCK_MIRROR) && !memblock_is_mirror(m))
continue;
+ /* skip nomap memory unless we were asked for it explicitly */
+ if (!(flags & MEMBLOCK_NOMAP) && memblock_is_nomap(m))
+ continue;
+
if (!type_b) {
if (out_start)
*out_start = m_start;
@@ -1022,6 +1037,10 @@ void __init_memblock __next_mem_range_rev(u64 *idx, int nid, ulong flags,
if ((flags & MEMBLOCK_MIRROR) && !memblock_is_mirror(m))
continue;
+ /* skip nomap memory unless we were asked for it explicitly */
+ if (!(flags & MEMBLOCK_NOMAP) && memblock_is_nomap(m))
+ continue;
+
if (!type_b) {
if (out_start)
*out_start = m_start;
@@ -1519,6 +1538,15 @@ int __init_memblock memblock_is_memory(phys_addr_t addr)
return memblock_search(&memblock.memory, addr) != -1;
}
+int __init_memblock memblock_is_map_memory(phys_addr_t addr)
+{
+ int i = memblock_search(&memblock.memory, addr);
+
+ if (i == -1)
+ return false;
+ return !memblock_is_nomap(&memblock.memory.regions[i]);
+}
+
#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
int __init_memblock memblock_search_pfn_nid(unsigned long pfn,
unsigned long *start_pfn, unsigned long *end_pfn)
--
1.9.1
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2015-09-14 15:55 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-14 15:55 [PATCH 0/3] arm64: remove UEFI reserved regions from linear mapping Ard Biesheuvel
2015-09-14 15:55 ` Ard Biesheuvel [this message]
2015-09-14 15:55 ` [PATCH 2/3] arm64: only consider memblocks with NOMAP cleared for " Ard Biesheuvel
2015-09-14 15:55 ` [PATCH 3/3] arm64/efi: mark UEFI reserved regions as MEMBLOCK_NOMAP Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442246129-13930-2-git-send-email-ard.biesheuvel@linaro.org \
--to=ard.biesheuvel@linaro.org \
--cc=akpm@linux-foundation.org \
--cc=catalin.marinas@arm.com \
--cc=leif.lindholm@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mm@kvack.org \
--cc=mark.rutland@arm.com \
--cc=msalter@redhat.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).