From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: akpm@linux-foundation.org,
Mel Gorman <mgorman@techsingularity.net>,
"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>,
Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Subject: [PATCH V2] mm/thp/migration: switch from flush_tlb_range to flush_pmd_tlb_range
Date: Wed, 10 Feb 2016 21:05:10 +0530 [thread overview]
Message-ID: <1455118510-15031-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com> (raw)
We remove one instace of flush_tlb_range here. That was added by
f714f4f20e59ea6eea264a86b9a51fd51b88fc54 ("mm: numa: call MMU notifiers
on THP migration"). But the pmdp_huge_clear_flush_notify should have
done the require flush for us. Hence remove the extra flush.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
Changes from V1:
* fix build error
include/asm-generic/pgtable.h | 17 +++++++++++++++++
mm/migrate.c | 8 +++++---
mm/pgtable-generic.c | 14 --------------
3 files changed, 22 insertions(+), 17 deletions(-)
diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index c370b261c720..9401f4819891 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -783,6 +783,23 @@ static inline int pmd_clear_huge(pmd_t *pmd)
}
#endif /* CONFIG_HAVE_ARCH_HUGE_VMAP */
+#ifndef __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+/*
+ * ARCHes with special requirements for evicting THP backing TLB entries can
+ * implement this. Otherwise also, it can help optimize normal TLB flush in
+ * THP regime. stock flush_tlb_range() typically has optimization to nuke the
+ * entire TLB TLB if flush span is greater than a threshold, which will
+ * likely be true for a single huge page. Thus a single thp flush will
+ * invalidate the entire TLB which is not desitable.
+ * e.g. see arch/arc: flush_pmd_tlb_range
+ */
+#define flush_pmd_tlb_range(vma, addr, end) flush_tlb_range(vma, addr, end)
+#else
+#define flush_pmd_tlb_range(vma, addr, end) BUILD_BUG()
+#endif
+#endif
+
#endif /* !__ASSEMBLY__ */
#ifndef io_remap_pfn_range
diff --git a/mm/migrate.c b/mm/migrate.c
index b1034f9c77e7..c079c115d038 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -1767,7 +1767,10 @@ int migrate_misplaced_transhuge_page(struct mm_struct *mm,
put_page(new_page);
goto out_fail;
}
-
+ /*
+ * We are not sure a pending tlb flush here is for a huge page
+ * mapping or not. Hence use the tlb range variant
+ */
if (mm_tlb_flush_pending(mm))
flush_tlb_range(vma, mmun_start, mmun_end);
@@ -1823,12 +1826,11 @@ fail_putback:
page_add_anon_rmap(new_page, vma, mmun_start, true);
pmdp_huge_clear_flush_notify(vma, mmun_start, pmd);
set_pmd_at(mm, mmun_start, pmd, entry);
- flush_tlb_range(vma, mmun_start, mmun_end);
update_mmu_cache_pmd(vma, address, &entry);
if (page_count(page) != 2) {
set_pmd_at(mm, mmun_start, pmd, orig_entry);
- flush_tlb_range(vma, mmun_start, mmun_end);
+ flush_pmd_tlb_range(vma, mmun_start, mmun_end);
mmu_notifier_invalidate_range(mm, mmun_start, mmun_end);
update_mmu_cache_pmd(vma, address, &entry);
page_remove_rmap(new_page, true);
diff --git a/mm/pgtable-generic.c b/mm/pgtable-generic.c
index 9d4767698a1c..3c9c78400300 100644
--- a/mm/pgtable-generic.c
+++ b/mm/pgtable-generic.c
@@ -84,20 +84,6 @@ pte_t ptep_clear_flush(struct vm_area_struct *vma, unsigned long address,
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-#ifndef __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
-
-/*
- * ARCHes with special requirements for evicting THP backing TLB entries can
- * implement this. Otherwise also, it can help optimize normal TLB flush in
- * THP regime. stock flush_tlb_range() typically has optimization to nuke the
- * entire TLB TLB if flush span is greater than a threshhold, which will
- * likely be true for a single huge page. Thus a single thp flush will
- * invalidate the entire TLB which is not desitable.
- * e.g. see arch/arc: flush_pmd_tlb_range
- */
-#define flush_pmd_tlb_range(vma, addr, end) flush_tlb_range(vma, addr, end)
-#endif
-
#ifndef __HAVE_ARCH_PMDP_SET_ACCESS_FLAGS
int pmdp_set_access_flags(struct vm_area_struct *vma,
unsigned long address, pmd_t *pmdp,
--
2.5.0
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next reply other threads:[~2016-02-10 15:35 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-10 15:35 Aneesh Kumar K.V [this message]
2016-02-10 16:14 ` [PATCH V2] mm/thp/migration: switch from flush_tlb_range to flush_pmd_tlb_range Aneesh Kumar K.V
2016-03-17 9:35 ` ARC !THP broken in linux-next (was Re: [PATCH V2] mm/thp/migration: switch from flush_tlb_range to flush_pmd_tlb_range) Vineet Gupta
2016-03-17 10:05 ` Vineet Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1455118510-15031-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com \
--to=aneesh.kumar@linux.vnet.ibm.com \
--cc=Vineet.Gupta1@synopsys.com \
--cc=akpm@linux-foundation.org \
--cc=kirill.shutemov@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@techsingularity.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).