linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: js1304@gmail.com
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Rik van Riel <riel@redhat.com>,
	Johannes Weiner <hannes@cmpxchg.org>,
	mgorman@techsingularity.net, Laura Abbott <lauraa@codeaurora.org>,
	Minchan Kim <minchan@kernel.org>,
	Marek Szyprowski <m.szyprowski@samsung.com>,
	Michal Nazarewicz <mina86@mina86.com>,
	"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>,
	Vlastimil Babka <vbabka@suse.cz>,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	Joonsoo Kim <iamjoonsoo.kim@lge.com>
Subject: [PATCH v4 3/5] mm/cma: remove ALLOC_CMA
Date: Tue,  9 Aug 2016 15:39:17 +0900	[thread overview]
Message-ID: <1470724759-855-4-git-send-email-iamjoonsoo.kim@lge.com> (raw)
In-Reply-To: <1470724759-855-1-git-send-email-iamjoonsoo.kim@lge.com>

From: Joonsoo Kim <iamjoonsoo.kim@lge.com>

Now, all reserved pages for CMA region are belong to the ZONE_CMA
and it only serves for GFP_HIGHUSER_MOVABLE. Therefore, we don't need to
consider ALLOC_CMA at all.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
---
 mm/internal.h   |  1 -
 mm/page_alloc.c | 26 ++------------------------
 2 files changed, 2 insertions(+), 25 deletions(-)

diff --git a/mm/internal.h b/mm/internal.h
index d04255a..913896d 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -466,7 +466,6 @@ unsigned long reclaim_clean_pages_from_list(struct zone *zone,
 #define ALLOC_HARDER		0x10 /* try to alloc harder */
 #define ALLOC_HIGH		0x20 /* __GFP_HIGH set */
 #define ALLOC_CPUSET		0x40 /* check for correct cpuset */
-#define ALLOC_CMA		0x80 /* allow allocations from CMA areas */
 
 enum ttu_flags;
 struct tlbflush_unmap_batch;
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 352096e..e0205e2 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -2796,12 +2796,6 @@ bool __zone_watermark_ok(struct zone *z, unsigned int order, unsigned long mark,
 	else
 		min -= min / 4;
 
-#ifdef CONFIG_CMA
-	/* If allocation can't use CMA areas don't use free CMA pages */
-	if (!(alloc_flags & ALLOC_CMA))
-		free_pages -= zone_page_state(z, NR_FREE_CMA_PAGES);
-#endif
-
 	/*
 	 * Check watermarks for an order-0 allocation request. If these
 	 * are not met, then a high-order request also cannot go ahead
@@ -2831,10 +2825,8 @@ bool __zone_watermark_ok(struct zone *z, unsigned int order, unsigned long mark,
 		}
 
 #ifdef CONFIG_CMA
-		if ((alloc_flags & ALLOC_CMA) &&
-		    !list_empty(&area->free_list[MIGRATE_CMA])) {
+		if (!list_empty(&area->free_list[MIGRATE_CMA]))
 			return true;
-		}
 #endif
 	}
 	return false;
@@ -2851,13 +2843,6 @@ static inline bool zone_watermark_fast(struct zone *z, unsigned int order,
 		unsigned long mark, int classzone_idx, unsigned int alloc_flags)
 {
 	long free_pages = zone_page_state(z, NR_FREE_PAGES);
-	long cma_pages = 0;
-
-#ifdef CONFIG_CMA
-	/* If allocation can't use CMA areas don't use free CMA pages */
-	if (!(alloc_flags & ALLOC_CMA))
-		cma_pages = zone_page_state(z, NR_FREE_CMA_PAGES);
-#endif
 
 	/*
 	 * Fast check for order-0 only. If this fails then the reserves
@@ -2866,7 +2851,7 @@ static inline bool zone_watermark_fast(struct zone *z, unsigned int order,
 	 * the caller is !atomic then it'll uselessly search the free
 	 * list. That corner case is then slower but it is harmless.
 	 */
-	if (!order && (free_pages - cma_pages) > mark + z->lowmem_reserve[classzone_idx])
+	if (!order && free_pages > mark + z->lowmem_reserve[classzone_idx])
 		return true;
 
 	return __zone_watermark_ok(z, order, mark, classzone_idx, alloc_flags,
@@ -3390,10 +3375,6 @@ gfp_to_alloc_flags(gfp_t gfp_mask)
 	} else if (unlikely(rt_task(current)) && !in_interrupt())
 		alloc_flags |= ALLOC_HARDER;
 
-#ifdef CONFIG_CMA
-	if (gfpflags_to_migratetype(gfp_mask) == MIGRATE_MOVABLE)
-		alloc_flags |= ALLOC_CMA;
-#endif
 	return alloc_flags;
 }
 
@@ -3762,9 +3743,6 @@ __alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order,
 	if (unlikely(!zonelist->_zonerefs->zone))
 		return NULL;
 
-	if (IS_ENABLED(CONFIG_CMA) && ac.migratetype == MIGRATE_MOVABLE)
-		alloc_flags |= ALLOC_CMA;
-
 retry_cpuset:
 	cpuset_mems_cookie = read_mems_allowed_begin();
 
-- 
1.9.1

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2016-08-09  6:39 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-09  6:39 [PATCH v4 0/5] Introduce ZONE_CMA js1304
2016-08-09  6:39 ` [PATCH v4 1/5] mm/cma: introduce new zone, ZONE_CMA js1304
2016-08-09  6:39 ` [PATCH v4 2/5] mm/cma: populate ZONE_CMA js1304
2016-08-19 11:20   ` Vlastimil Babka
2016-08-23  1:44     ` Joonsoo Kim
2016-08-09  6:39 ` js1304 [this message]
2016-08-19 13:12   ` [PATCH v4 3/5] mm/cma: remove ALLOC_CMA Vlastimil Babka
2016-08-09  6:39 ` [PATCH v4 4/5] mm/cma: remove MIGRATE_CMA js1304
2016-08-19 13:29   ` Vlastimil Babka
2016-08-09  6:39 ` [PATCH v4 5/5] mm/cma: remove per zone CMA stat js1304

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1470724759-855-4-git-send-email-iamjoonsoo.kim@lge.com \
    --to=js1304@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=aneesh.kumar@linux.vnet.ibm.com \
    --cc=hannes@cmpxchg.org \
    --cc=iamjoonsoo.kim@lge.com \
    --cc=lauraa@codeaurora.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=m.szyprowski@samsung.com \
    --cc=mgorman@techsingularity.net \
    --cc=mina86@mina86.com \
    --cc=minchan@kernel.org \
    --cc=riel@redhat.com \
    --cc=vbabka@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).