From: "Jérôme Glisse" <jglisse@redhat.com>
To: akpm@linux-foundation.org, linux-kernel@vger.kernel.org,
linux-mm@kvack.org
Cc: "John Hubbard" <jhubbard@nvidia.com>,
"Jérôme Glisse" <jglisse@redhat.com>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Ingo Molnar" <mingo@redhat.com>,
"H. Peter Anvin" <hpa@zytor.com>
Subject: [HMM v13 07/18] mm/ZONE_DEVICE/x86: add support for un-addressable device memory
Date: Fri, 18 Nov 2016 13:18:16 -0500 [thread overview]
Message-ID: <1479493107-982-8-git-send-email-jglisse@redhat.com> (raw)
In-Reply-To: <1479493107-982-1-git-send-email-jglisse@redhat.com>
It does not need much, just skip populating kernel linear mapping
for range of un-addressable device memory (it is pick so that there
is no physical memory resource overlapping it). All the logic is in
share mm code.
Only support x86-64 as this feature doesn't make much sense with
constrained virtual address space of 32bits architecture.
Signed-off-by: JA(C)rA'me Glisse <jglisse@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
---
arch/x86/mm/init_64.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 8c4abb0..556f7bb 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -661,13 +661,17 @@ int arch_add_memory(int nid, u64 start, u64 size, int flags)
unsigned long nr_pages = size >> PAGE_SHIFT;
int ret;
- /* Need to add support for device and unaddressable memory if needed */
- if (flags & MEMORY_UNADDRESSABLE) {
- BUG();
- return -EINVAL;
- }
-
- init_memory_mapping(start, start + size);
+ /*
+ * We get un-addressable memory when some one is adding a ZONE_DEVICE
+ * to have struct page for a device memory which is not accessible by
+ * the CPU so it is pointless to have a linear kernel mapping of such
+ * memory.
+ *
+ * Core mm should make sure it never set a pte pointing to such fake
+ * physical range.
+ */
+ if (!(flags & MEMORY_UNADDRESSABLE))
+ init_memory_mapping(start, start + size);
ret = __add_pages(nid, zone, start_pfn, nr_pages);
WARN_ON_ONCE(ret);
@@ -972,12 +976,6 @@ int __ref arch_remove_memory(u64 start, u64 size, int flags)
struct zone *zone;
int ret;
- /* Need to add support for device and unaddressable memory if needed */
- if (flags & MEMORY_UNADDRESSABLE) {
- BUG();
- return -EINVAL;
- }
-
/* With altmap the first mapped page is offset from @start */
altmap = to_vmem_altmap((unsigned long) page);
if (altmap)
@@ -985,7 +983,9 @@ int __ref arch_remove_memory(u64 start, u64 size, int flags)
zone = page_zone(page);
ret = __remove_pages(zone, start_pfn, nr_pages);
WARN_ON_ONCE(ret);
- kernel_physical_mapping_remove(start, start + size);
+
+ if (!(flags & MEMORY_UNADDRESSABLE))
+ kernel_physical_mapping_remove(start, start + size);
return ret;
}
--
2.4.3
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2016-11-18 17:17 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-18 18:18 [HMM v13 00/18] HMM (Heterogeneous Memory Management) v13 Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 01/18] mm/memory/hotplug: convert device parameter bool to set of flags Jérôme Glisse
2016-11-21 0:44 ` Balbir Singh
2016-11-21 4:53 ` Jerome Glisse
2016-11-21 6:57 ` Anshuman Khandual
2016-11-21 12:19 ` Jerome Glisse
2016-11-21 6:41 ` Anshuman Khandual
2016-11-21 12:27 ` Jerome Glisse
2016-11-22 5:35 ` Anshuman Khandual
2016-11-22 14:08 ` Jerome Glisse
2016-11-18 18:18 ` [HMM v13 02/18] mm/ZONE_DEVICE/unaddressable: add support for un-addressable device memory Jérôme Glisse
2016-11-21 8:06 ` Anshuman Khandual
2016-11-21 12:33 ` Jerome Glisse
2016-11-22 5:15 ` Anshuman Khandual
2016-11-18 18:18 ` [HMM v13 03/18] mm/ZONE_DEVICE/free_hot_cold_page: catch ZONE_DEVICE pages Jérôme Glisse
2016-11-21 8:18 ` Anshuman Khandual
2016-11-21 12:50 ` Jerome Glisse
2016-11-22 4:30 ` Anshuman Khandual
2016-11-18 18:18 ` [HMM v13 04/18] mm/ZONE_DEVICE/free-page: callback when page is freed Jérôme Glisse
2016-11-21 1:49 ` Balbir Singh
2016-11-21 4:57 ` Jerome Glisse
2016-11-21 8:26 ` Anshuman Khandual
2016-11-21 12:34 ` Jerome Glisse
2016-11-22 5:02 ` Anshuman Khandual
2016-11-18 18:18 ` [HMM v13 05/18] mm/ZONE_DEVICE/devmem_pages_remove: allow early removal of device memory Jérôme Glisse
2016-11-21 10:37 ` Anshuman Khandual
2016-11-21 12:39 ` Jerome Glisse
2016-11-22 4:54 ` Anshuman Khandual
2016-11-18 18:18 ` [HMM v13 06/18] mm/ZONE_DEVICE/unaddressable: add special swap for unaddressable Jérôme Glisse
2016-11-21 2:06 ` Balbir Singh
2016-11-21 5:05 ` Jerome Glisse
2016-11-22 2:19 ` Balbir Singh
2016-11-22 13:59 ` Jerome Glisse
2016-11-21 11:10 ` Anshuman Khandual
2016-11-21 10:58 ` Anshuman Khandual
2016-11-21 12:42 ` Jerome Glisse
2016-11-22 4:48 ` Anshuman Khandual
2016-11-24 13:56 ` Jerome Glisse
2016-11-18 18:18 ` Jérôme Glisse [this message]
2016-11-21 2:08 ` [HMM v13 07/18] mm/ZONE_DEVICE/x86: add support for un-addressable device memory Balbir Singh
2016-11-21 5:08 ` Jerome Glisse
2016-11-18 18:18 ` [HMM v13 08/18] mm/hmm: heterogeneous memory management (HMM for short) Jérôme Glisse
2016-11-21 2:29 ` Balbir Singh
2016-11-21 5:14 ` Jerome Glisse
2016-11-23 4:03 ` Anshuman Khandual
2016-11-27 13:10 ` Jerome Glisse
2016-11-28 2:58 ` Anshuman Khandual
2016-11-28 9:41 ` Jerome Glisse
2016-11-18 18:18 ` [HMM v13 09/18] mm/hmm/mirror: mirror process address space on device with HMM helpers Jérôme Glisse
2016-11-21 2:42 ` Balbir Singh
2016-11-21 5:18 ` Jerome Glisse
2016-11-18 18:18 ` [HMM v13 10/18] mm/hmm/mirror: add range lock helper, prevent CPU page table update for the range Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 11/18] mm/hmm/mirror: add range monitor helper, to monitor CPU page table update Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 12/18] mm/hmm/mirror: helper to snapshot CPU page table Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 13/18] mm/hmm/mirror: device page fault handler Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 14/18] mm/hmm/migrate: support un-addressable ZONE_DEVICE page in migration Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 15/18] mm/hmm/migrate: add new boolean copy flag to migratepage() callback Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 16/18] mm/hmm/migrate: new memory migration helper for use with device memory Jérôme Glisse
2016-11-18 19:57 ` Aneesh Kumar K.V
2016-11-18 20:15 ` Jerome Glisse
2016-11-19 14:32 ` Aneesh Kumar K.V
2016-11-19 17:17 ` Jerome Glisse
2016-11-20 18:21 ` Aneesh Kumar K.V
2016-11-20 20:06 ` Jerome Glisse
2016-11-21 3:30 ` Balbir Singh
2016-11-21 5:31 ` Jerome Glisse
2016-11-18 18:18 ` [HMM v13 17/18] mm/hmm/devmem: device driver helper to hotplug ZONE_DEVICE memory Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 18/18] mm/hmm/devmem: dummy HMM device as an helper for " Jérôme Glisse
2016-11-19 0:41 ` [HMM v13 00/18] HMM (Heterogeneous Memory Management) v13 John Hubbard
2016-11-19 14:50 ` Aneesh Kumar K.V
2016-11-23 9:16 ` Haggai Eran
2016-11-25 16:16 ` Jerome Glisse
2016-11-27 13:27 ` Haggai Eran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479493107-982-8-git-send-email-jglisse@redhat.com \
--to=jglisse@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=jhubbard@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).