From: Minchan Kim <minchan@kernel.org>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, linux-mm@kvack.org,
kernel-team@lge.com, Johannes Weiner <hannes@cmpxchg.org>,
Michal Hocko <mhocko@suse.com>,
"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>,
Anshuman Khandual <khandual@linux.vnet.ibm.com>,
Minchan Kim <minchan@kernel.org>,
Vlastimil Babka <vbabka@suse.cz>
Subject: [PATCH v2 04/10] mm: make the try_to_munlock void function
Date: Wed, 15 Mar 2017 14:24:47 +0900 [thread overview]
Message-ID: <1489555493-14659-5-git-send-email-minchan@kernel.org> (raw)
In-Reply-To: <1489555493-14659-1-git-send-email-minchan@kernel.org>
try_to_munlock returns SWAP_MLOCK if the one of VMAs mapped
the page has VM_LOCKED flag. In that time, VM set PG_mlocked to
the page if the page is not pte-mapped THP which cannot be
mlocked, either.
With that, __munlock_isolated_page can use PageMlocked to check
whether try_to_munlock is successful or not without relying on
try_to_munlock's retval. It helps to make try_to_unmap/try_to_unmap_one
simple with upcoming patches.
Cc: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
---
include/linux/rmap.h | 2 +-
mm/mlock.c | 6 ++----
mm/rmap.c | 17 +++++------------
3 files changed, 8 insertions(+), 17 deletions(-)
diff --git a/include/linux/rmap.h b/include/linux/rmap.h
index b556eef..1b0cd4c 100644
--- a/include/linux/rmap.h
+++ b/include/linux/rmap.h
@@ -235,7 +235,7 @@ int page_mkclean(struct page *);
* called in munlock()/munmap() path to check for other vmas holding
* the page mlocked.
*/
-int try_to_munlock(struct page *);
+void try_to_munlock(struct page *);
void remove_migration_ptes(struct page *old, struct page *new, bool locked);
diff --git a/mm/mlock.c b/mm/mlock.c
index 02f1382..9660ee5 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -123,17 +123,15 @@ static bool __munlock_isolate_lru_page(struct page *page, bool getpage)
*/
static void __munlock_isolated_page(struct page *page)
{
- int ret = SWAP_AGAIN;
-
/*
* Optimization: if the page was mapped just once, that's our mapping
* and we don't need to check all the other vmas.
*/
if (page_mapcount(page) > 1)
- ret = try_to_munlock(page);
+ try_to_munlock(page);
/* Did try_to_unlock() succeed or punt? */
- if (ret != SWAP_MLOCK)
+ if (!PageMlocked(page))
count_vm_event(UNEVICTABLE_PGMUNLOCKED);
putback_lru_page(page);
diff --git a/mm/rmap.c b/mm/rmap.c
index bdc7310..2f1fbd9 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -1547,18 +1547,10 @@ static int page_not_mapped(struct page *page)
* Called from munlock code. Checks all of the VMAs mapping the page
* to make sure nobody else has this page mlocked. The page will be
* returned with PG_mlocked cleared if no other vmas have it mlocked.
- *
- * Return values are:
- *
- * SWAP_AGAIN - no vma is holding page mlocked, or,
- * SWAP_AGAIN - page mapped in mlocked vma -- couldn't acquire mmap sem
- * SWAP_FAIL - page cannot be located at present
- * SWAP_MLOCK - page is now mlocked.
*/
-int try_to_munlock(struct page *page)
-{
- int ret;
+void try_to_munlock(struct page *page)
+{
struct rmap_walk_control rwc = {
.rmap_one = try_to_unmap_one,
.arg = (void *)TTU_MUNLOCK,
@@ -1568,9 +1560,10 @@ int try_to_munlock(struct page *page)
};
VM_BUG_ON_PAGE(!PageLocked(page) || PageLRU(page), page);
+ VM_BUG_ON_PAGE(PageMlocked(page), page);
+ VM_BUG_ON_PAGE(PageCompound(page) && PageDoubleMap(page), page);
- ret = rmap_walk(page, &rwc);
- return ret;
+ rmap_walk(page, &rwc);
}
void __put_anon_vma(struct anon_vma *anon_vma)
--
2.7.4
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2017-03-15 5:24 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-15 5:24 [PATCH v2 00/10] make try_to_unmap simple Minchan Kim
2017-03-15 5:24 ` [PATCH v2 01/10] mm: remove unncessary ret in page_referenced Minchan Kim
2017-03-15 5:24 ` [PATCH v2 02/10] mm: remove SWAP_DIRTY in ttu Minchan Kim
2017-03-15 5:24 ` [PATCH v2 03/10] mm: remove SWAP_MLOCK check for SWAP_SUCCESS " Minchan Kim
2017-03-15 5:24 ` Minchan Kim [this message]
2017-03-15 7:31 ` [PATCH v2 04/10] mm: make the try_to_munlock void function Vlastimil Babka
2017-04-08 3:18 ` alexander.levin
2017-04-11 2:56 ` Minchan Kim
2017-03-15 5:24 ` [PATCH v2 05/10] mm: remove SWAP_MLOCK in ttu Minchan Kim
2017-03-15 5:24 ` [PATCH v2 06/10] mm: remove SWAP_AGAIN " Minchan Kim
2017-03-15 5:24 ` [PATCH v2 07/10] mm: make ttu's return boolean Minchan Kim
2017-03-15 5:24 ` [PATCH v2 08/10] mm: make rmap_walk void function Minchan Kim
2017-03-15 5:24 ` [PATCH v2 09/10] mm: make rmap_one boolean function Minchan Kim
2017-03-15 5:24 ` [PATCH v2 10/10] mm: remove SWAP_[SUCCESS|AGAIN|FAIL] Minchan Kim
2017-03-16 4:40 ` Sergey Senozhatsky
2017-03-16 5:33 ` Minchan Kim
2017-03-16 5:44 ` Sergey Senozhatsky
2017-03-16 5:51 ` Minchan Kim
2017-03-16 5:57 ` Sergey Senozhatsky
2017-03-16 18:54 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1489555493-14659-5-git-send-email-minchan@kernel.org \
--to=minchan@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=hannes@cmpxchg.org \
--cc=kernel-team@lge.com \
--cc=khandual@linux.vnet.ibm.com \
--cc=kirill.shutemov@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@suse.com \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).