From: Ram Pai <linuxram@us.ibm.com>
To: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
linux-arch@vger.kernel.org, linux-mm@kvack.org, x86@kernel.org,
linux-doc@vger.kernel.org, linux-kselftest@vger.kernel.org
Cc: benh@kernel.crashing.org, paulus@samba.org, mpe@ellerman.id.au,
khandual@linux.vnet.ibm.com, aneesh.kumar@linux.vnet.ibm.com,
bsingharora@gmail.com, dave.hansen@intel.com, hbabu@us.ibm.com,
linuxram@us.ibm.com, arnd@arndb.de, akpm@linux-foundation.org,
corbet@lwn.net, mingo@redhat.com
Subject: [RFC v5 16/38] powerpc: implementation for arch_set_user_pkey_access()
Date: Wed, 5 Jul 2017 14:21:53 -0700 [thread overview]
Message-ID: <1499289735-14220-17-git-send-email-linuxram@us.ibm.com> (raw)
In-Reply-To: <1499289735-14220-1-git-send-email-linuxram@us.ibm.com>
This patch provides the detailed implementation for
a user to allocate a key and enable it in the hardware.
It provides the plumbing, but it cannot be used yet
till the system call is implemented. The next patch
will do so.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
---
arch/powerpc/include/asm/pkeys.h | 8 ++++-
arch/powerpc/mm/Makefile | 1 +
arch/powerpc/mm/pkeys.c | 66 ++++++++++++++++++++++++++++++++++++++
3 files changed, 74 insertions(+), 1 deletions(-)
create mode 100644 arch/powerpc/mm/pkeys.c
diff --git a/arch/powerpc/include/asm/pkeys.h b/arch/powerpc/include/asm/pkeys.h
index 9345767..1495342 100644
--- a/arch/powerpc/include/asm/pkeys.h
+++ b/arch/powerpc/include/asm/pkeys.h
@@ -2,6 +2,10 @@
#define _ASM_PPC64_PKEYS_H
#define arch_max_pkey() 32
+#define AMR_AD_BIT 0x1UL
+#define AMR_WD_BIT 0x2UL
+#define IAMR_EX_BIT 0x1UL
+#define AMR_BITS_PER_PKEY 2
#define ARCH_VM_PKEY_FLAGS (VM_PKEY_BIT0 | VM_PKEY_BIT1 | VM_PKEY_BIT2 | \
VM_PKEY_BIT3 | VM_PKEY_BIT4)
/*
@@ -93,10 +97,12 @@ static inline int arch_override_mprotect_pkey(struct vm_area_struct *vma,
return 0;
}
+extern int __arch_set_user_pkey_access(struct task_struct *tsk, int pkey,
+ unsigned long init_val);
static inline int arch_set_user_pkey_access(struct task_struct *tsk, int pkey,
unsigned long init_val)
{
- return 0;
+ return __arch_set_user_pkey_access(tsk, pkey, init_val);
}
static inline void pkey_mm_init(struct mm_struct *mm)
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 7414034..8cc2ff1 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -45,3 +45,4 @@ obj-$(CONFIG_PPC_COPRO_BASE) += copro_fault.o
obj-$(CONFIG_SPAPR_TCE_IOMMU) += mmu_context_iommu.o
obj-$(CONFIG_PPC_PTDUMP) += dump_linuxpagetables.o
obj-$(CONFIG_PPC_HTDUMP) += dump_hashpagetable.o
+obj-$(CONFIG_PPC64_MEMORY_PROTECTION_KEYS) += pkeys.o
diff --git a/arch/powerpc/mm/pkeys.c b/arch/powerpc/mm/pkeys.c
new file mode 100644
index 0000000..d3ba167
--- /dev/null
+++ b/arch/powerpc/mm/pkeys.c
@@ -0,0 +1,66 @@
+/*
+ * PowerPC Memory Protection Keys management
+ * Copyright (c) 2015, Intel Corporation.
+ * Copyright (c) 2017, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+#include <linux/pkeys.h> /* PKEY_* */
+#include <uapi/asm-generic/mman-common.h>
+
+/*
+ * set the access right in AMR IAMR and UAMOR register
+ * for @pkey to that specified in @init_val.
+ */
+int __arch_set_user_pkey_access(struct task_struct *tsk, int pkey,
+ unsigned long init_val)
+{
+ u64 old_amr, old_uamor, old_iamr;
+ int pkey_shift = (arch_max_pkey()-pkey-1) * AMR_BITS_PER_PKEY;
+ u64 new_amr_bits = 0x0ul;
+ u64 new_iamr_bits = 0x0ul;
+ u64 new_uamor_bits = 0x3ul;
+
+ /* Set the bits we need in AMR: */
+ if (init_val & PKEY_DISABLE_ACCESS)
+ new_amr_bits |= AMR_AD_BIT | AMR_WD_BIT;
+ if (init_val & PKEY_DISABLE_WRITE)
+ new_amr_bits |= AMR_WD_BIT;
+
+ /*
+ * By default execute is disabled.
+ * To enable execute, PKEY_ENABLE_EXECUTE
+ * needs to be specified.
+ */
+ if ((init_val & PKEY_DISABLE_EXECUTE))
+ new_iamr_bits |= IAMR_EX_BIT;
+
+ /* Shift the bits in to the correct place in AMR for pkey: */
+ new_amr_bits <<= pkey_shift;
+ new_iamr_bits <<= pkey_shift;
+ new_uamor_bits <<= pkey_shift;
+
+ /* Get old AMR and mask off any old bits in place: */
+ old_amr = read_amr();
+ old_amr &= ~((u64)(AMR_AD_BIT|AMR_WD_BIT) << pkey_shift);
+
+ old_iamr = read_iamr();
+ old_iamr &= ~(0x3ul << pkey_shift);
+
+ old_uamor = read_uamor();
+ old_uamor &= ~(0x3ul << pkey_shift);
+
+ /* Write old part along with new part: */
+ write_amr(old_amr | new_amr_bits);
+ write_iamr(old_iamr | new_iamr_bits);
+ write_uamor(old_uamor | new_uamor_bits);
+
+ return 0;
+}
--
1.7.1
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2017-07-05 21:23 UTC|newest]
Thread overview: 92+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-05 21:21 [RFC v5 00/38] powerpc: Memory Protection Keys Ram Pai
2017-07-05 21:21 ` [RFC v5 01/38] powerpc: Free up four 64K PTE bits in 4K backed HPTE pages Ram Pai
2017-07-07 7:25 ` Balbir Singh
2017-07-05 21:21 ` [RFC v5 02/38] powerpc: Free up four 64K PTE bits in 64K " Ram Pai
2017-07-11 5:59 ` Balbir Singh
2017-07-11 15:44 ` Ram Pai
2017-07-12 3:10 ` Balbir Singh
2017-07-13 7:39 ` Ram Pai
2017-07-05 21:21 ` [RFC v5 03/38] powerpc: introduce pte_set_hash_slot() helper Ram Pai
2017-07-05 21:21 ` [RFC v5 04/38] powerpc: introduce pte_get_hash_gslot() helper Ram Pai
2017-07-05 21:21 ` [RFC v5 05/38] powerpc: capture the PTE format changes in the dump pte report Ram Pai
2017-07-05 21:21 ` [RFC v5 06/38] powerpc: use helper functions in __hash_page_64K() for 64K PTE Ram Pai
2017-07-05 21:21 ` [RFC v5 07/38] powerpc: use helper functions in __hash_page_huge() " Ram Pai
2017-07-05 21:21 ` [RFC v5 08/38] powerpc: use helper functions in __hash_page_4K() " Ram Pai
2017-07-05 21:21 ` [RFC v5 09/38] powerpc: use helper functions in __hash_page_4K() for 4K PTE Ram Pai
2017-07-05 21:21 ` [RFC v5 10/38] powerpc: use helper functions in flush_hash_page() Ram Pai
2017-07-05 21:21 ` [RFC v5 11/38] mm: introduce an additional vma bit for powerpc pkey Ram Pai
2017-07-11 18:10 ` Dave Hansen
2017-07-12 22:23 ` Ram Pai
2017-07-12 22:40 ` Benjamin Herrenschmidt
2017-07-05 21:21 ` [RFC v5 12/38] mm: ability to disable execute permission on a key at creation Ram Pai
2017-07-11 18:11 ` Dave Hansen
2017-07-11 21:29 ` Benjamin Herrenschmidt
2017-07-11 21:51 ` Ram Pai
2017-07-11 21:57 ` Dave Hansen
2017-07-11 22:14 ` Ram Pai
2017-07-11 22:19 ` Dave Hansen
2017-07-11 22:08 ` Benjamin Herrenschmidt
2017-07-11 22:19 ` Ram Pai
2017-07-05 21:21 ` [RFC v5 13/38] x86: disallow pkey creation with PKEY_DISABLE_EXECUTE Ram Pai
2017-07-11 18:12 ` Dave Hansen
2017-07-05 21:21 ` [RFC v5 14/38] powerpc: initial plumbing for key management Ram Pai
2017-07-12 3:28 ` Balbir Singh
2017-07-13 7:45 ` Ram Pai
2017-07-13 20:37 ` Ram Pai
2017-07-13 21:30 ` Balbir Singh
2017-07-05 21:21 ` [RFC v5 15/38] powerpc: helper function to read,write AMR,IAMR,UAMOR registers Ram Pai
2017-07-12 5:26 ` Balbir Singh
2017-07-13 7:55 ` Ram Pai
2017-07-13 9:49 ` Balbir Singh
2017-07-13 23:29 ` Ram Pai
2017-07-05 21:21 ` Ram Pai [this message]
2017-07-05 21:21 ` [RFC v5 17/38] powerpc: sys_pkey_alloc() and sys_pkey_free() system calls Ram Pai
2017-07-05 21:21 ` [RFC v5 18/38] powerpc: store and restore the pkey state across context switches Ram Pai
2017-07-05 21:21 ` [RFC v5 19/38] powerpc: introduce execute-only pkey Ram Pai
2017-07-05 21:21 ` [RFC v5 20/38] powerpc: ability to associate pkey to a vma Ram Pai
2017-07-05 21:21 ` [RFC v5 21/38] powerpc: implementation for arch_override_mprotect_pkey() Ram Pai
2017-07-05 21:21 ` [RFC v5 22/38] powerpc: map vma key-protection bits to pte key bits Ram Pai
2017-07-05 21:22 ` [RFC v5 23/38] powerpc: sys_pkey_mprotect() system call Ram Pai
2017-07-05 21:22 ` [RFC v5 24/38] powerpc: Program HPTE key protection bits Ram Pai
2017-07-05 21:22 ` [RFC v5 25/38] powerpc: helper to validate key-access permissions of a pte Ram Pai
2017-07-05 21:22 ` [RFC v5 26/38] powerpc: check key protection for user page access Ram Pai
2017-07-05 21:22 ` [RFC v5 27/38] powerpc: Macro the mask used for checking DSI exception Ram Pai
2017-07-05 21:22 ` [RFC v5 28/38] powerpc: implementation for arch_vma_access_permitted() Ram Pai
2017-07-05 21:22 ` [RFC v5 29/38] powerpc: Handle exceptions caused by pkey violation Ram Pai
2017-07-05 21:22 ` [RFC v5 30/38] powerpc: capture AMR register content on " Ram Pai
2017-07-05 21:22 ` [RFC v5 31/38] powerpc: introduce get_pte_pkey() helper Ram Pai
2017-07-10 3:11 ` Anshuman Khandual
2017-07-10 5:55 ` Ram Pai
2017-07-11 11:22 ` Anshuman Khandual
2017-07-05 21:22 ` [RFC v5 32/38] powerpc: capture the violated protection key on fault Ram Pai
2017-07-10 3:10 ` Anshuman Khandual
2017-07-10 5:49 ` Ram Pai
2017-07-05 21:22 ` [RFC v5 33/38] powerpc: Deliver SEGV signal on pkey violation Ram Pai
2017-07-10 3:08 ` Anshuman Khandual
2017-07-05 21:22 ` [RFC v5 34/38] procfs: display the protection-key number associated with a vma Ram Pai
2017-07-10 3:07 ` Anshuman Khandual
2017-07-10 6:01 ` Ram Pai
2017-07-11 18:13 ` Dave Hansen
2017-07-13 8:03 ` Ram Pai
2017-07-13 14:07 ` Dave Hansen
2017-07-13 17:04 ` Ram Pai
2017-07-05 21:22 ` [RFC v5 35/38] selftest: Move protecton key selftest to arch neutral directory Ram Pai
2017-07-05 21:22 ` [RFC v5 36/38] selftest: PowerPC specific test updates to memory protection keys Ram Pai
2017-07-11 17:33 ` Dave Hansen
2017-07-12 21:57 ` Ram Pai
2017-07-05 21:22 ` [RFC v5 37/38] Documentation: Move protecton key documentation to arch neutral directory Ram Pai
2017-07-05 21:22 ` [RFC v5 38/38] Documentation: PowerPC specific updates to memory protection keys Ram Pai
2017-07-10 3:07 ` Anshuman Khandual
2017-07-10 5:59 ` Ram Pai
2017-07-11 18:23 ` Dave Hansen
2017-07-13 19:56 ` Ram Pai
2017-07-10 5:43 ` [RFC v5 00/38] powerpc: Memory Protection Keys Anshuman Khandual
2017-07-10 6:05 ` Ram Pai
2017-07-10 17:15 ` Ram Pai
2017-07-11 14:52 ` Michal Hocko
2017-07-11 19:32 ` Ram Pai
2017-07-11 21:30 ` Benjamin Herrenschmidt
2017-07-12 7:23 ` Michal Hocko
2017-07-12 7:39 ` Michal Hocko
2017-07-12 22:53 ` Benjamin Herrenschmidt
2017-07-13 6:20 ` Michal Hocko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1499289735-14220-17-git-send-email-linuxram@us.ibm.com \
--to=linuxram@us.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=aneesh.kumar@linux.vnet.ibm.com \
--cc=arnd@arndb.de \
--cc=benh@kernel.crashing.org \
--cc=bsingharora@gmail.com \
--cc=corbet@lwn.net \
--cc=dave.hansen@intel.com \
--cc=hbabu@us.ibm.com \
--cc=khandual@linux.vnet.ibm.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mingo@redhat.com \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).