[PATCH 12/31] x86/entry/32: Add PTI cr3 switch to non-NMI entry/exit points

[Joerg Roedel <joro@8bytes.org>]

From: Joerg Roedel <jroedel@suse.de>

Add unconditional cr3 switches between user and kernel cr3
to all non-NMI entry and exit points.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/entry/entry_32.S | 59 ++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 58 insertions(+), 1 deletion(-)

diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 9693485..b5ef003 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -328,6 +328,25 @@
 #endif /* CONFIG_X86_ESPFIX32 */
 .endm
 
+/* Unconditionally switch to user cr3 */
+.macro SWITCH_TO_USER_CR3 scratch_reg:req
+	ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
+
+	movl	%cr3, \scratch_reg
+	orl	$PTI_SWITCH_MASK, \scratch_reg
+	movl	\scratch_reg, %cr3
+.Lend_\@:
+.endm
+
+/* Unconditionally switch to kernel cr3 */
+.macro SWITCH_TO_KERNEL_CR3 scratch_reg:req
+	ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
+	movl	%cr3, \scratch_reg
+	andl	$(~PTI_SWITCH_MASK), \scratch_reg
+	movl	\scratch_reg, %cr3
+.Lend_\@:
+.endm
+
 
 /*
  * Called with pt_regs fully populated and kernel segments loaded,
@@ -343,6 +362,8 @@
 
 	ALTERNATIVE     "", "jmp .Lend_\@", X86_FEATURE_XENPV
 
+	SWITCH_TO_KERNEL_CR3 scratch_reg=%eax
+
 	/* Are we on the entry stack? Bail out if not! */
 	movl	PER_CPU_VAR(cpu_entry_area), %edi
 	addl	$CPU_ENTRY_AREA_entry_stack, %edi
@@ -637,6 +658,18 @@ ENTRY(xen_sysenter_target)
  * 0(%ebp) arg6
  */
 ENTRY(entry_SYSENTER_32)
+	/*
+	 * On entry-stack with all userspace-regs live - save and
+	 * restore eflags and %eax to use it as scratch-reg for the cr3
+	 * switch.
+	 */
+	pushfl
+	pushl	%eax
+	SWITCH_TO_KERNEL_CR3 scratch_reg=%eax
+	popl	%eax
+	popfl
+
+	/* Stack empty again, switch to task stack */
 	movl	TSS_entry_stack(%esp), %esp
 
 .Lsysenter_past_esp:
@@ -691,6 +724,10 @@ ENTRY(entry_SYSENTER_32)
 	movl	PT_OLDESP(%esp), %ecx	/* pt_regs->sp */
 1:	mov	PT_FS(%esp), %fs
 	PTGS_TO_GS
+
+	/* Segments are restored - switch to user cr3 */
+	SWITCH_TO_USER_CR3 scratch_reg=%eax
+
 	popl	%ebx			/* pt_regs->bx */
 	addl	$2*4, %esp		/* skip pt_regs->cx and pt_regs->dx */
 	popl	%esi			/* pt_regs->si */
@@ -778,7 +815,23 @@ restore_all:
 .Lrestore_all_notrace:
 	CHECK_AND_APPLY_ESPFIX
 .Lrestore_nocheck:
-	RESTORE_REGS 4				# skip orig_eax/error_code
+	/*
+	 * First restore user segments. This can cause exceptions, so we
+	 * run it with kernel cr3.
+	 */
+	RESTORE_SEGMENTS
+
+	/*
+	 * Segments are restored - no more exceptions from here on except on
+	 * iret, but that handled safely.
+	 */
+	SWITCH_TO_USER_CR3 scratch_reg=%eax
+
+	/* Restore rest */
+	RESTORE_INT_REGS
+
+	/* Unwind stack to the iret frame */
+	RESTORE_SKIP_SEGMENTS 4			# skip orig_eax/error_code
 .Lirq_return:
 	INTERRUPT_RETURN
 
@@ -1139,6 +1192,10 @@ ENTRY(debug)
 
 	SAVE_ALL
 	ENCODE_FRAME_POINTER
+
+	/* Make sure we are running on kernel cr3 */
+	SWITCH_TO_KERNEL_CR3 scratch_reg=%eax
+
 	xorl	%edx, %edx			# error code 0
 	movl	%esp, %eax			# pt_regs pointer
 
-- 
2.7.4

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>