linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: David Hildenbrand <david@redhat.com>
To: Oscar Salvador <osalvador@suse.de>
Cc: Muchun Song <songmuchun@bytedance.com>,
	corbet@lwn.net, akpm@linux-foundation.org, paulmck@kernel.org,
	mike.kravetz@oracle.com, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-mm@kvack.org,
	duanxiongchun@bytedance.com, smuchun@gmail.com
Subject: Re: [PATCH v2 2/2] mm: memory_hotplug: introduce SECTION_CANNOT_OPTIMIZE_VMEMMAP
Date: Fri, 17 Jun 2022 09:43:33 +0200	[thread overview]
Message-ID: <186924ab-651f-71a1-93d2-3500a67dffee@redhat.com> (raw)
In-Reply-To: <YqwVTT+50vt5WpeG@localhost.localdomain>

On 17.06.22 07:46, Oscar Salvador wrote:
> On Thu, Jun 16, 2022 at 09:30:33AM +0200, David Hildenbrand wrote:
>> IIRC, that was used to skip these patches on the offlining path before
>> we provided the ranges to offline_pages().
> 
> Yeah, it was designed for that purpose back then.
> 
>> I'd not mess with PG_reserved, and give them a clearer name, to not
>> confuse them with other, ordinary, vmemmap pages that are not
>> self-hosted (maybe in the future we might want to flag all vmemmap pages
>> with a new type?).
> 
> Not sure whether a new type is really needed, or to put it another way, I
> cannot see the benefit.
> 
>>
>> I'd just try reusing the flag PG_owner_priv_1. And eventually, flag all
>> (v)memmap pages with a type PG_memmap. However, the latter would be
>> optional and might not be strictly required
>>
>>
>> So what think could make sense is
>>
>> /* vmemmap pages that are self-hosted and cannot be optimized/freed. */
>> PG_vmemmap_self_hosted = PG_owner_priv_1,
> 
> Sure, I just lightly tested the below, and seems to work, but not sure
> whether that is what you are referring to.
> @Munchun: thoughts?
> 
> diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
> index e66f7aa3191d..a4556afd7bda 100644
> --- a/include/linux/page-flags.h
> +++ b/include/linux/page-flags.h
> @@ -193,6 +193,11 @@ enum pageflags {
>  
>  	/* Only valid for buddy pages. Used to track pages that are reported */
>  	PG_reported = PG_uptodate,
> +
> +#ifdef CONFIG_MEMORY_HOTPLUG
> +	/* For self-hosted memmap pages */
> +	PG_vmemmap_self_hosted = PG_owner_priv_1,
> +#endif
>  };
>  
>  #define PAGEFLAGS_MASK		((1UL << NR_PAGEFLAGS) - 1)
> @@ -628,6 +633,10 @@ PAGEFLAG_FALSE(SkipKASanPoison, skip_kasan_poison)
>   */
>  __PAGEFLAG(Reported, reported, PF_NO_COMPOUND)
>  
> +#ifdef CONFIG_MEMORY_HOTPLUG
> +PAGEFLAG(Vmemmap_self_hosted, vmemmap_self_hosted, PF_ANY)

VmemmapSelfHosted, then the function names get nicer.

> +#endif
> +
>  /*
>   * On an anonymous page mapped into a user virtual memory area,
>   * page->mapping points to its anon_vma, not to a struct address_space;
> diff --git a/mm/hugetlb_vmemmap.c b/mm/hugetlb_vmemmap.c
> index 1089ea8a9c98..e2de7ed27e9e 100644
> --- a/mm/hugetlb_vmemmap.c
> +++ b/mm/hugetlb_vmemmap.c
> @@ -101,6 +101,14 @@ void hugetlb_vmemmap_free(struct hstate *h, struct page *head)
>  {
>  	unsigned long vmemmap_addr = (unsigned long)head;
>  	unsigned long vmemmap_end, vmemmap_reuse, vmemmap_pages;
> +	struct mem_section *ms = __pfn_to_section(page_to_pfn(head));
> +	struct page *memmap;
> +
> +	memmap = sparse_decode_mem_map(ms->section_mem_map,
> +				       pfn_to_section_nr(page_to_pfn(head)));

Why can't we check the head page directly? Either I need more coffee or
this can be simplified.

> +
> +	if (PageVmemmap_self_hosted(memmap))

Maybe that's the right place for a comment, an ascii art, and how it is
safe to only check the first vmemmap page due to alignment restrictions.

> +		return;
>  
>  	vmemmap_pages = hugetlb_optimize_vmemmap_pages(h);
>  	if (!vmemmap_pages)
> @@ -199,10 +207,10 @@ static struct ctl_table hugetlb_vmemmap_sysctls[] = {
>  static __init int hugetlb_vmemmap_sysctls_init(void)
>  {
>  	/*
> -	 * If "memory_hotplug.memmap_on_memory" is enabled or "struct page"
> -	 * crosses page boundaries, the vmemmap pages cannot be optimized.
> +	 * If "struct page" crosses page boundaries, the vmemmap pages cannot
> +	 * be optimized.
>  	 */
> -	if (!mhp_memmap_on_memory() && is_power_of_2(sizeof(struct page)))
> +	if (is_power_of_2(sizeof(struct page)))
>  		register_sysctl_init("vm", hugetlb_vmemmap_sysctls);
>  
>  	return 0;
> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> index 1213d0c67a53..863966c2c6f1 100644
> --- a/mm/memory_hotplug.c
> +++ b/mm/memory_hotplug.c
> @@ -45,8 +45,6 @@
>  #ifdef CONFIG_MHP_MEMMAP_ON_MEMORY
>  static int memmap_on_memory_set(const char *val, const struct kernel_param *kp)
>  {
> -	if (hugetlb_optimize_vmemmap_enabled())
> -		return 0;
>  	return param_set_bool(val, kp);
>  }
>  
> @@ -1032,6 +1030,7 @@ int mhp_init_memmap_on_memory(unsigned long pfn, unsigned long nr_pages,
>  {
>  	unsigned long end_pfn = pfn + nr_pages;
>  	int ret;
> +	int i;
>  
>  	ret = kasan_add_zero_shadow(__va(PFN_PHYS(pfn)), PFN_PHYS(nr_pages));
>  	if (ret)
> @@ -1039,6 +1038,12 @@ int mhp_init_memmap_on_memory(unsigned long pfn, unsigned long nr_pages,
>  
>  	move_pfn_range_to_zone(zone, pfn, nr_pages, NULL, MIGRATE_UNMOVABLE);
>  
> +	/*
> +	 * Let us flag self-hosted memmap
> +	 */

I think that comment can be dropped because the code does exactly that.

> +	for (i = 0; i < nr_pages; i++)
> +		SetPageVmemmap_self_hosted(pfn_to_page(pfn + i));
> +
>  	/*
>  	 * It might be that the vmemmap_pages fully span sections. If that is
>  	 * the case, mark those sections online here as otherwise they will be
> 
> 


-- 
Thanks,

David / dhildenb



  parent reply	other threads:[~2022-06-17  7:43 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-20  2:55 [PATCH v2 0/2] make hugetlb_optimize_vmemmap compatible with memmap_on_memory Muchun Song
2022-05-20  2:55 ` [PATCH v2 1/2] mm: memory_hotplug: enumerate all supported section flags Muchun Song
2022-06-15  9:35   ` David Hildenbrand
2022-06-15 13:02     ` Muchun Song
2022-05-20  2:55 ` [PATCH v2 2/2] mm: memory_hotplug: introduce SECTION_CANNOT_OPTIMIZE_VMEMMAP Muchun Song
2022-06-15  9:51   ` David Hildenbrand
2022-06-16  2:45     ` Muchun Song
2022-06-16  7:21       ` David Hildenbrand
2022-06-16 10:16         ` Muchun Song
2022-06-16  3:57     ` Oscar Salvador
2022-06-16  7:30       ` David Hildenbrand
2022-06-17  5:46         ` Oscar Salvador
2022-06-17  7:28           ` Muchun Song
2022-06-17  7:39             ` David Hildenbrand
2022-06-17  9:10               ` Muchun Song
2022-06-17  9:25                 ` David Hildenbrand
2022-06-17  9:40                   ` Muchun Song
2022-06-17  9:48             ` Oscar Salvador
2022-06-17  7:43           ` David Hildenbrand [this message]
2022-06-17  9:54             ` Oscar Salvador
2022-06-17 10:14               ` David Hildenbrand
2022-06-17 10:49                 ` Muchun Song
2022-06-17 11:19                   ` Muchun Song
2022-06-18  5:49           ` Muchun Song

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=186924ab-651f-71a1-93d2-3500a67dffee@redhat.com \
    --to=david@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=corbet@lwn.net \
    --cc=duanxiongchun@bytedance.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mike.kravetz@oracle.com \
    --cc=osalvador@suse.de \
    --cc=paulmck@kernel.org \
    --cc=smuchun@gmail.com \
    --cc=songmuchun@bytedance.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).