From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: Christoph Lameter <clameter@sgi.com>
Cc: linux-mm@kvack.org, nacc@us.ibm.com, lee.schermerhorn@hp.com,
bob.picco@hp.com, kamezawa.hiroyu@jp.fujitsu.com, mel@skynet.ie
Subject: Re: [BUG] at mm/slab.c:3320
Date: Thu, 3 Jan 2008 21:20:46 +0530 [thread overview]
Message-ID: <20080103155046.GA7092@skywalker> (raw)
In-Reply-To: <Pine.LNX.4.64.0801021227580.20331@schroedinger.engr.sgi.com>
On Wed, Jan 02, 2008 at 12:32:42PM -0800, Christoph Lameter wrote:
>
> This occurred on a 32 bit NUMA platform? Guess NUMAQ?
>
> The dmesg that I saw was partial. Could you repost a full problem
> description to linux-mm@kvack.org and cc the authors of memoryless node
> support?
>
> Nishanth Aravamudan <nacc@us.ibm.com>
> Lee Schermerhorn <lee.schermerhorn@hp.com>
> Bob Picco <bob.picco@hp.com>
> KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
> Mel Gorman <mel@skynet.ie>
> Christoph Lameter <clameter@sgi.com>
>
Full dmesg:
----------
Booting 'autobench'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-autobench ro console=tty0 console=ttyS0,115200 autobench_a
rgs: root=/dev/sda3 ABAT:1198144312
[Linux-bzImage, setup=0x2800, size=0x1a08e8]
initrd /boot/initrd-autobench.img
[Linux-initrd @ 0x37ed8000, 0x117985 bytes]
Linux version 2.6.24-rc5-autokern1 (root@elm3a23) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-9)) #1 SMP PREEMPT Thu Dec 20 04:16:18 EST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dff91900 (usable)
BIOS-e820: 00000000dff91900 - 00000000dff9c340 (ACPI data)
BIOS-e820: 00000000dff9c340 - 00000000e0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 00000002a0000000 (usable)
Node: 0, start_pfn: 0, end_pfn: 156
Node: 0, start_pfn: 256, end_pfn: 917393
Node: 0, start_pfn: 1048576, end_pfn: 2752512
get_memcfg_from_srat: assigning address to rsdp
RSD PTR v0 [IBM ]
Begin SRAT table scan....
CPU 0x00 in proximity domain 0x00
CPU 0x02 in proximity domain 0x00
CPU 0x10 in proximity domain 0x00
CPU 0x12 in proximity domain 0x00
Memory range 0x0 to 0xE0000 (type 0x0) in proximity domain 0x00 enabled
Memory range 0x100000 to 0x120000 (type 0x0) in proximity domain 0x00 enabled
CPU 0x20 in proximity domain 0x01
CPU 0x22 in proximity domain 0x01
CPU 0x30 in proximity domain 0x01
CPU 0x32 in proximity domain 0x01
Memory range 0x120000 to 0x2A0000 (type 0x0) in proximity domain 0x01 enabled
acpi20_parse_srat: Entry length value is zero; can't parse any further!
pxm bitmap: 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Number of logical nodes in system = 2
Number of memory chunks in system = 3
chunk 0 nid 0 start_pfn 00000000 end_pfn 000e0000
chunk 1 nid 0 start_pfn 00100000 end_pfn 00120000
chunk 2 nid 1 start_pfn 00120000 end_pfn 002a0000
Node: 0, start_pfn: 0, end_pfn: 1179648
Node: 1, start_pfn: 1179648, end_pfn: 2752512
Reserving 16384 pages of KVA for lmem_map of node 0
Shrinking node 0 from 1179648 pages to 1163264 pages
Reserving 22016 pages of KVA for lmem_map of node 1
Shrinking node 1 from 2752512 pages to 2730496 pages
Reserving total of 38400 pages for numa KVA remap
kva_start_pfn ~ 190464 find_max_low_pfn() ~ 229376
max_pfn = 2752512
9856MB HIGHMEM available.
896MB LOWMEM available.
min_low_pfn = 1945, max_low_pfn = 229376, highstart_pfn = 229376
Low memory ends at vaddr f8000000
node 0 will remap to vaddr ee800000 - fc000000
node 1 will remap to vaddr f2800000 - 01600000
High memory starts at vaddr f8000000
found SMP MP-table at 0009c540
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 2752512
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0 -> 917504
0: 1048576 -> 1163264
1: 1179648 -> 2730496
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000FDFC0, 0014 (r0 IBM )
ACPI: RSDT DFF9C2C0, 0034 (r1 IBM SERVIGIL 1000 IBM 45444F43)
ACPI: FACP DFF9C240, 0074 (r1 IBM SERVIGIL 1000 IBM 45444F43)
ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 0000000000000000/4 [20070126]
ACPI: DSDT DFF91900, 4AE5 (r1 IBM SERVIGIL 1000 INTL 2002025)
ACPI: FACS DFF9BFC0, 0040
ACPI: APIC DFF9C140, 00D2 (r1 IBM SERVIGIL 1000 IBM 45444F43)
ACPI: SRAT DFF9C000, 0128 (r1 IBM SERVIGIL 1000 IBM 45444F43)
ACPI: SSDT DFF96400, 5AE6 (r1 IBM VIGSSDT0 1000 INTL 2002025)
ACPI: PM-Timer IO Port: 0x508
Marking TSC unstable due to: Summit based system.
Switched to APIC driver `summit'.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
Processor #2 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
Processor #16 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
Processor #18 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x20] enabled)
Processor #32 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x22] enabled)
Processor #34 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x30] enabled)
Processor #48 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x32] enabled)
Processor #50 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 14, version 17, address 0xfec00000, GSI 0-43
ACPI: IOAPIC (id[0x0d] address[0xfec01000] gsi_base[44])
IOAPIC[1]: apic_id 13, version 17, address 0xfec01000, GSI 44-87
ACPI: INT_SRC_OVR (bus 0 bus_irq 8 global_irq 8 low edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
Enabling APIC mode: Summit. Using 2 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 2545933
Policy zone: HighMem
Kernel command line: ro console=tty0 console=ttyS0,115200 autobench_args: root=/dev/sda3 ABAT:1198144312
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c04c9000 soft=c0449000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1996.171 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 30
... MAX_LOCKDEP_KEYS: 2048
... CLASSHASH_SIZE: 1024
... MAX_LOCKDEP_ENTRIES: 8192
... MAX_LOCKDEP_CHAINS: 16384
... CHAINHASH_SIZE: 8192
memory used by lock dependency info: 992 kB
per task-struct memory footprint: 1200 bytes
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing HighMem for node 0 (00038000:0011c000)
Initializing HighMem for node 1 (00120000:0029aa00)
Memory: 10168328k/11010048k available (2043k kernel code, 162988k reserved, 1058k data, 232k init, 9414212k highmem)
virtual kernel memory layout:
fixmap : 0xff234000 - 0xfffff000 (14124 kB)
pkmap : 0xff000000 - 0xff200000 (2048 kB)
vmalloc : 0xf8800000 - 0xfeffe000 ( 103 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc040c000 - 0xc0446000 ( 232 kB)
.data : 0xc02fedc1 - 0xc040765c (1058 kB)
.text : 0xc0100000 - 0xc02fedc1 (2043 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4002.61 BogoMIPS (lpj=8005239)
------------[ cut here ]------------
kernel BUG at mm/slab.c:3320!
invalid opcode: 0000 [#1] PREEMPT SMP
Modules linked in:
Pid: 0, comm: swapper Not tainted (2.6.24-rc5-autokern1 #1)
EIP: 0060:[<c0181707>] EFLAGS: 00010046 CPU: 0
EIP is at ____cache_alloc_node+0x1c/0x130
EAX: ee4005c0 EBX: 00000000 ECX: 00000001 EDX: 000000d0
ESI: 00000000 EDI: ee4005c0 EBP: c0408f74 ESP: c0408f54
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process swapper (pid: 0, ti=c0408000 task=c03d5d80 task.ti=c0408000)
Stack: c03d5d80 c0408f6c c017ac36 00000001 000000d0 00000000 000000d0 ee4005c0
c0408f88 c0181577 0001080c 00000246 ee4005c0 c0408fa8 c0181a97 c0408fb0
c01395b9 000000d0 0001080c 00099800 c03dccec c0408fd0 c01395b9 c0408fd0
Call Trace:
[<c0105e23>] show_trace_log_lvl+0x19/0x2e
[<c0105ee5>] show_stack_log_lvl+0x99/0xa1
[<c010603f>] show_registers+0xb3/0x1e9
[<c0106301>] die+0x11b/0x1fe
[<c02fb654>] do_trap+0x8e/0xa8
[<c01065cd>] do_invalid_op+0x88/0x92
[<c02fb422>] error_code+0x72/0x78
[<c0181577>] alternate_node_alloc+0x5b/0x60
[<c0181a97>] kmem_cache_alloc+0x50/0x120
[<c01395b9>] create_pid_cachep+0x4c/0xec
[<c041ae65>] pidmap_init+0x2f/0x6e
[<c040c715>] start_kernel+0x1ca/0x23e
[<00000000>] 0x0
=======================
Code: ff eb 02 31 ff 89 f8 83 c4 10 5b 5e 5f 5d c3 55 89 e5 57 89 c7 56 53 83 ec 14 89 55 f0 89 4d ec 8b b4 88 88 02 00 00 85 f6 75 04 <0f> 0b eb fe e8 f3 ee ff ff 8d 46 24 89 45 e4 e8 23 97 17 00 8b
EIP: [<c0181707>] ____cache_alloc_node+0x1c/0x130 SS:ESP 0068:c0408f54
Kernel panic - not syncing: Attempted to kill the idle task!
-- 0:conmux-control -- time-stamp -- Dec/20/07 2:00:36 --
(bot:conmon-payload) disconnected
dmidecode output for machine details
----------------------------------
# dmidecode 2.2
SMBIOS 2.3 present.
112 structures occupying 6118 bytes.
Table at 0xDFF9C340.
Handle 0x0000
DMI type 0, 19 bytes.
BIOS Information
Vendor: IBM
Version: -[REE149AUS-1.13]-
Release Date: 06/08/2005
Address: 0xF12B0
Runtime Size: 60752 bytes
ROM Size: 8192 kB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
5.25"/360 KB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
I2O boot is supported
LS-120 boot is supported
Handle 0x0001
DMI type 1, 25 bytes.
System Information
Manufacturer: IBM
Product Name: eserver xSeries 445 -[887011X]-
Version: Not Specified
Serial Number: KPLWN39
UUID: 3AC361EB-101E-B211-80DA-50D400000000
Wake-up Type: Power Switch
Handle 0x0002
DMI type 2, 55 bytes.
Base Board Information
Manufacturer: IBM
Product Name: Node 1 SMP Module 1
Version: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Features:
Board is a hosting board
Board is removable
Board is replaceable
Location In Chassis: Node 1, Lower right
Chassis Handle: 0x0012
Type: Processor+Memory Module
Handle 0x0003
DMI type 2, 55 bytes.
Base Board Information
Manufacturer: IBM
Product Name: Node 1 SMP Module 2
Version: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Features:
Board is a hosting board
Board is removable
Board is replaceable
Location In Chassis: Node 1, Upper right
Chassis Handle: 0x0012
Type: Processor+Memory Module
Handle 0x0004
DMI type 2, 35 bytes.
Base Board Information
Manufacturer: IBM
Product Name: Node 1 Centerplane
Version: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Features:
Board is removable
Board is replaceable
Location In Chassis: Node 1, Center vertical
Chassis Handle: 0x0012
Type: Interconnect Board
Contained Object Handlers: 3
0x005D
0x005E
0x005F
Handle 0x0005
DMI type 2, 35 bytes.
Base Board Information
Manufacturer: IBM
Product Name: Node 1 Native I/O Planar
Version: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Features:
Board is removable
Board is replaceable
Location In Chassis: Node 1, Lower left
Chassis Handle: 0x0012
Type: I/O Module
Handle 0x0006
DMI type 2, 35 bytes.
Base Board Information
Manufacturer: IBM
Product Name: Node 1 PCI I/O Planar
Version: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Features:
Board is removable
Board is replaceable
Location In Chassis: Node 1, Upper left
Chassis Handle: 0x0012
Type: I/O Module
Contained Object Handlers: 6
0x0082
0x0083
0x0084
0x0085
0x0086
0x0087
Handle 0x0007
DMI type 2, 35 bytes.
Base Board Information
Manufacturer: IBM
Product Name: Node 1 Remote Supervisor Adapter
Version: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Features:
Board is removable
Board is replaceable
Location In Chassis: Node 1, Between Native I/O and PCI I/O planars
Chassis Handle: 0x0012
Type: System Management Module
Contained Object Handlers: 3
0x006B
0x006C
0x006D
Handle 0x0012
DMI type 3, 13 bytes.
Chassis Information
Manufacturer: IBM
Type: Main Server Chassis
Lock: Not Present
Version: Not Specified
Serial Number: Not Specified
Asset Tag:
Boot-up State: Safe
Power Supply State: Unknown
Thermal State: Unknown
Security Status: Unknown
Handle 0x0016
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 8 KB
Maximum Size: 16 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 4-way Set-associative
Handle 0x0017
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 KB
Maximum Size: 512 KB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0018
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L3 Cache
Configuration: Enabled, Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 1024 KB
Maximum Size: 32768 KB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0019
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 8 KB
Maximum Size: 16 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 4-way Set-associative
Handle 0x001A
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 KB
Maximum Size: 512 KB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x001B
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L3 Cache
Configuration: Enabled, Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 1024 KB
Maximum Size: 32768 KB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x001C
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 8 KB
Maximum Size: 16 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 4-way Set-associative
Handle 0x001D
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 KB
Maximum Size: 512 KB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x001E
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L3 Cache
Configuration: Enabled, Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 2048 KB
Maximum Size: 32768 KB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x001F
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 8 KB
Maximum Size: 16 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 4-way Set-associative
Handle 0x0020
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 KB
Maximum Size: 512 KB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0021
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L3 Cache
Configuration: Enabled, Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 2048 KB
Maximum Size: 32768 KB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0022
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 8 KB
Maximum Size: 16 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 4-way Set-associative
Handle 0x0023
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 KB
Maximum Size: 512 KB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0024
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L3 Cache
Configuration: Enabled, Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 2048 KB
Maximum Size: 32768 KB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0025
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 8 KB
Maximum Size: 16 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 4-way Set-associative
Handle 0x0026
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 KB
Maximum Size: 512 KB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0027
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L3 Cache
Configuration: Enabled, Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 2048 KB
Maximum Size: 32768 KB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0028
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 8 KB
Maximum Size: 16 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 4-way Set-associative
Handle 0x0029
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 KB
Maximum Size: 512 KB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x002A
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L3 Cache
Configuration: Enabled, Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 2048 KB
Maximum Size: 32768 KB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x002B
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 8 KB
Maximum Size: 16 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 4-way Set-associative
Handle 0x002C
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 KB
Maximum Size: 512 KB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x002D
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L3 Cache
Configuration: Enabled, Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 2048 KB
Maximum Size: 32768 KB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0046
DMI type 4, 32 bytes.
Processor Information
Socket Designation: Node 1 CPU 1
Type: Central Processor
Family: Xeon
Manufacturer: GenuineIntel
ID: 25 0F 00 00 00 00 00 00
Signature: Type 0, Family F, Model 2, Stepping 5
Flags: None
Version: Intel Xeon MP
Voltage: 1.5 V
External Clock: 100 MHz
Max Speed: 3000 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0016
L2 Cache Handle: 0x0017
L3 Cache Handle: 0x0018
Handle 0x0047
DMI type 4, 32 bytes.
Processor Information
Socket Designation: Node 1 CPU 2
Type: Central Processor
Family: Xeon
Manufacturer: GenuineIntel
ID: 25 0F 00 00 00 00 00 00
Signature: Type 0, Family F, Model 2, Stepping 5
Flags: None
Version: Intel Xeon MP
Voltage: 1.5 V
External Clock: 100 MHz
Max Speed: 3000 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0019
L2 Cache Handle: 0x001A
L3 Cache Handle: 0x001B
Handle 0x0048
DMI type 4, 32 bytes.
Processor Information
Socket Designation: Node 1 CPU 3
Type: Central Processor
Family: Xeon
Manufacturer: GenuineIntel
ID: 22 0F 00 00 00 00 00 00
Signature: Type 0, Family F, Model 2, Stepping 2
Flags: None
Version: Intel Xeon MP
Voltage: 1.5 V
External Clock: 100 MHz
Max Speed: 3000 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x001C
L2 Cache Handle: 0x001D
L3 Cache Handle: 0x001E
Handle 0x0049
DMI type 4, 32 bytes.
Processor Information
Socket Designation: Node 1 CPU 4
Type: Central Processor
Family: Xeon
Manufacturer: GenuineIntel
ID: 22 0F 00 00 00 00 00 00
Signature: Type 0, Family F, Model 2, Stepping 2
Flags: None
Version: Intel Xeon MP
Voltage: 1.5 V
External Clock: 100 MHz
Max Speed: 3000 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x001F
L2 Cache Handle: 0x0020
L3 Cache Handle: 0x0021
Handle 0x004A
DMI type 4, 32 bytes.
Processor Information
Socket Designation: Node 1 CPU 5
Type: Central Processor
Family: Xeon
Manufacturer: GenuineIntel
ID: 22 0F 00 00 00 00 00 00
Signature: Type 0, Family F, Model 2, Stepping 2
Flags: None
Version: Intel Xeon MP
Voltage: 1.5 V
External Clock: 100 MHz
Max Speed: 3000 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0022
L2 Cache Handle: 0x0023
L3 Cache Handle: 0x0024
Handle 0x004B
DMI type 4, 32 bytes.
Processor Information
Socket Designation: Node 1 CPU 6
Type: Central Processor
Family: Xeon
Manufacturer: GenuineIntel
ID: 22 0F 00 00 00 00 00 00
Signature: Type 0, Family F, Model 2, Stepping 2
Flags: None
Version: Intel Xeon MP
Voltage: 1.5 V
External Clock: 100 MHz
Max Speed: 3000 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0025
L2 Cache Handle: 0x0026
L3 Cache Handle: 0x0027
Handle 0x004C
DMI type 4, 32 bytes.
Processor Information
Socket Designation: Node 1 CPU 7
Type: Central Processor
Family: Xeon
Manufacturer: GenuineIntel
ID: 22 0F 00 00 00 00 00 00
Signature: Type 0, Family F, Model 2, Stepping 2
Flags: None
Version: Intel Xeon MP
Voltage: 1.5 V
External Clock: 100 MHz
Max Speed: 3000 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0028
L2 Cache Handle: 0x0029
L3 Cache Handle: 0x002A
Handle 0x004D
DMI type 4, 32 bytes.
Processor Information
Socket Designation: Node 1 CPU 8
Type: Central Processor
Family: Xeon
Manufacturer: GenuineIntel
ID: 22 0F 00 00 00 00 00 00
Signature: Type 0, Family F, Model 2, Stepping 2
Flags: None
Version: Intel Xeon MP
Voltage: 1.5 V
External Clock: 100 MHz
Max Speed: 3000 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x002B
L2 Cache Handle: 0x002C
L3 Cache Handle: 0x002D
Handle 0x0056
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Lower Scalability 1
External Connector Type: Proprietary
Port Type: Other
Handle 0x0057
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Lower Scalability 2
External Connector Type: Proprietary
Port Type: Other
Handle 0x0058
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Lower Scalability 3
External Connector Type: Proprietary
Port Type: Other
Handle 0x0059
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Upper Scalability 1
External Connector Type: Proprietary
Port Type: Other
Handle 0x005A
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Upper Scalability 2
External Connector Type: Proprietary
Port Type: Other
Handle 0x005B
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Upper Scalability 3
External Connector Type: Proprietary
Port Type: Other
Handle 0x005C
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: RXE B
External Connector Type: Proprietary
Port Type: Other
Handle 0x005D
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Mouse
External Connector Type: Mini DIN
Port Type: Mouse Port
Handle 0x005E
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: Mini DIN
Port Type: Keyboard Port
Handle 0x005F
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: RS-485
External Connector Type: RJ-45
Port Type: Other
Handle 0x0060
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB 1
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0061
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB 2
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0062
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB 3
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0063
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Video
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x0064
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: RXE A
External Connector Type: Proprietary
Port Type: Other
Handle 0x0065
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Diskette/CDROM
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0066
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: External SCSI (channel A)
External Connector Type: 68 Pin Dual Inline
Port Type: SCSI Wide
Handle 0x0067
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Internal SCSI (channel B)
Internal Connector Type: 68 Pin Dual Inline
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SCSI Wide
Handle 0x0068
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: 10/100/1000 Ethernet (port A)
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x0069
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: 10/100/1000 Ethernet (port B)
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x006A
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: RSA Serial
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x006B
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: RSA Ethernet
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x006C
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: RSA RS-485
External Connector Type: RJ-45
Port Type: Other
Handle 0x0081
DMI type 9, 13 bytes.
System Slot Information
Designation: Node 1 133MHz PCI-X ActivePCI Card Slot 6
Type: 64-bit PCI-X
Current Usage: Available
Length: Long
ID: 6
Characteristics:
3.3 V is provided
PME signal is supported
Hot-plug devices are supported
Handle 0x0082
DMI type 9, 13 bytes.
System Slot Information
Designation: Node 1 133MHz PCI-X ActivePCI Card Slot 5
Type: 64-bit PCI-X
Current Usage: Available
Length: Long
ID: 5
Characteristics:
3.3 V is provided
PME signal is supported
Hot-plug devices are supported
Handle 0x0083
DMI type 9, 13 bytes.
System Slot Information
Designation: Node 1 100MHz PCI-X ActivePCI Card Slot 4
Type: 64-bit PCI-X
Current Usage: Available
Length: Long
ID: 4
Characteristics:
3.3 V is provided
PME signal is supported
Hot-plug devices are supported
Handle 0x0084
DMI type 9, 13 bytes.
System Slot Information
Designation: Node 1 100MHz PCI-X ActivePCI Card Slot 3
Type: 64-bit PCI-X
Current Usage: Available
Length: Long
ID: 3
Characteristics:
3.3 V is provided
PME signal is supported
Hot-plug devices are supported
Handle 0x0085
DMI type 9, 13 bytes.
System Slot Information
Designation: Node 1 66MHz PCI-X ActivePCI Card Slot 2
Type: 64-bit PCI-X
Current Usage: Available
Length: Long
ID: 2
Characteristics:
3.3 V is provided
PME signal is supported
Hot-plug devices are supported
Handle 0x0086
DMI type 9, 13 bytes.
System Slot Information
Designation: Node 1 66MHz PCI-X ActivePCI Card Slot 1
Type: 64-bit PCI-X
Current Usage: Available
Length: Long
ID: 1
Characteristics:
3.3 V is provided
PME signal is supported
Hot-plug devices are supported
Handle 0x00A5
DMI type 10, 10 bytes.
On Board Device Information
Type: Video
Status: Enabled
Description: ATI Rage XL Video Controller, 8M Memory
On Board Device Information
Type: SCSI Controller
Status: Enabled
Description: LSI Logic 1030 Dual Ultra320 SCSI Controller
On Board Device Information
Type: Ethernet
Status: Enabled
Description: Broadcom 5704 10/100/1000 Dual Ethernet Controller
Handle 0x00A7
DMI type 11, 5 bytes.
OEM Strings
String 1: IBM Diagnostics 1.05 -[REYT23AUS-1.05]-
String 2: IBM Remote Supervisor Adapter -[REE825CUS]-
Handle 0x00A8
DMI type 12, 5 bytes.
System Configuration Options
Option 1: J20-Power on Password Override jumper
Option 2: Changing the position of this jumper bypasses the
Option 3: power-on password checking on the next power-on.
Option 4: You do not need to move the jumper back to the
Option 5: default position after the password is overridden.
Option 6: Changing the position of this jumper does not affect
Option 7: the administrator password check if an administrator
Option 8: password is set.
Handle 0x00A9
DMI type 12, 5 bytes.
System Configuration Options
Option 1: J28-Flash ROM page swap jumper
Option 2: Primary-on pins 1-2, Backup-on pins 2-3
Option 3: The Primary(default) position is a jumper installed
Option 4: on pins marked by a white block under the pins.
Option 5: Changing the position of this jumper will change
Option 6: which of the two pages of flash ROM is used when
Option 7: the system is started.
Handle 0x00AA
DMI type 13, 22 bytes.
BIOS Language Information
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x00AB
DMI type 16, 15 bytes.
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: Multi-bit ECC
Maximum Capacity: 64 GB
Error Information Handle: Not Provided
Number Of Devices: 64
Handle 0x00AC
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: 1
Locator: J1
Bank Locator: BANK 1/SMP Module 1/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00AD
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: 1
Locator: J3
Bank Locator: BANK 1/SMP Module 1/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00AE
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: 2
Locator: J2
Bank Locator: BANK 3/SMP Module 1/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00AF
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: 2
Locator: J4
Bank Locator: BANK 3/SMP Module 1/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00B0
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: 3
Locator: J5
Bank Locator: BANK 5/SMP Module 1/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00B1
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: 3
Locator: J7
Bank Locator: BANK 5/SMP Module 1/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00B2
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: 4
Locator: J6
Bank Locator: BANK 7/SMP Module 1/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00B3
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: 4
Locator: J8
Bank Locator: BANK 7/SMP Module 1/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00B4
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: 5
Locator: J9
Bank Locator: BANK 2/SMP Module 1/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00B5
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: 5
Locator: J11
Bank Locator: BANK 2/SMP Module 1/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00B6
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: 6
Locator: J10
Bank Locator: BANK 4/SMP Module 1/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00B7
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: 6
Locator: J12
Bank Locator: BANK 4/SMP Module 1/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00B8
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: 7
Locator: J13
Bank Locator: BANK 6/SMP Module 1/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00B9
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: 7
Locator: J15
Bank Locator: BANK 6/SMP Module 1/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00BA
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: 8
Locator: J14
Bank Locator: BANK 8/SMP Module 1/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00BB
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: 8
Locator: J16
Bank Locator: BANK 8/SMP Module 1/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00BC
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: 9
Locator: J1
Bank Locator: BANK 1/SMP Module 2/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00BD
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: 9
Locator: J3
Bank Locator: BANK 1/SMP Module 2/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00BE
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: 10
Locator: J2
Bank Locator: BANK 3/SMP Module 2/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00BF
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: 10
Locator: J4
Bank Locator: BANK 3/SMP Module 2/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00C0
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: 11
Locator: J5
Bank Locator: BANK 5/SMP Module 2/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00C1
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: 11
Locator: J7
Bank Locator: BANK 5/SMP Module 2/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00C2
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: 12
Locator: J6
Bank Locator: BANK 7/SMP Module 2/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00C3
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: 12
Locator: J8
Bank Locator: BANK 7/SMP Module 2/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00C4
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: 13
Locator: J9
Bank Locator: BANK 2/SMP Module 2/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00C5
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: 13
Locator: J11
Bank Locator: BANK 2/SMP Module 2/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00C6
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: 14
Locator: J10
Bank Locator: BANK 4/SMP Module 2/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00C7
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: 14
Locator: J12
Bank Locator: BANK 4/SMP Module 2/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00C8
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: 15
Locator: J13
Bank Locator: BANK 6/SMP Module 2/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00C9
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: 15
Locator: J15
Bank Locator: BANK 6/SMP Module 2/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00CA
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: 16
Locator: J14
Bank Locator: BANK 8/SMP Module 2/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00CB
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x00AB
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: 16
Locator: J16
Bank Locator: BANK 8/SMP Module 2/NODE 1
Type: DDR
Type Detail: Synchronous
Handle 0x00EC
DMI type 19, 15 bytes.
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0027FFFFFFF
Range Size: 10 GB
Physical Array Handle: 0x00AB
Partition Width: 0
Handle 0x010D
DMI type 32, 11 bytes.
System Boot Information
Status: No errors detected
Handle 0x010E
DMI type 221, 31 bytes.
OEM-specific Type
Header And Data:
DD 1F 0E 01 4E 4F 44 45 49 4E 46 4F 01 3A C3 61
EB 10 1E B2 11 80 DA 50 D4 00 00 00 00 01 02
Strings:
IBM Diagnostics 1.05 -[REYT23AUS-1.05]-
IBM Remote Supervisor Adapter -[REE825CUS]-
Handle 0x0110
DMI type 127, 4 bytes.
End Of Table
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2008-01-03 15:52 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20071220100541.GA6953@skywalker>
2007-12-25 22:05 ` [BUG] at mm/slab.c:3320 Andrew Morton
2007-12-27 15:32 ` Aneesh Kumar K.V
2007-12-27 19:31 ` Christoph Lameter
[not found] ` <20071228051959.GA6385@skywalker>
[not found] ` <Pine.LNX.4.64.0801021227580.20331@schroedinger.engr.sgi.com>
2008-01-03 15:50 ` Aneesh Kumar K.V [this message]
2008-01-04 0:33 ` Nishanth Aravamudan
2008-01-07 1:23 ` KAMEZAWA Hiroyuki
2008-01-07 18:10 ` Christoph Lameter
2008-01-08 1:40 ` KAMEZAWA Hiroyuki
2008-01-08 5:38 ` Christoph Lameter
2008-01-08 7:11 ` Aneesh Kumar K.V
2008-01-09 6:50 ` Nishanth Aravamudan
2008-01-09 17:50 ` Christoph Lameter
2008-01-09 18:58 ` Aneesh Kumar K.V
2008-01-09 19:23 ` Christoph Lameter
2008-01-09 21:47 ` Nishanth Aravamudan
2008-01-09 21:51 ` Christoph Lameter
2008-01-09 22:13 ` Nishanth Aravamudan
2008-01-10 0:02 ` Christoph Lameter
2008-01-17 12:31 ` Pekka Enberg
2008-01-17 14:32 ` Christoph Lameter
2008-01-17 14:36 ` Pekka J Enberg
2008-01-17 15:05 ` Christoph Lameter
2008-01-17 15:25 ` Aneesh Kumar K.V
2008-01-17 16:58 ` Christoph Lameter
2008-01-17 17:42 ` Aneesh Kumar K.V
2008-01-17 21:40 ` Mel Gorman
2008-01-17 20:47 ` Pekka J Enberg
2008-01-20 0:58 ` Mel Gorman
2008-01-22 20:20 ` Christoph Lameter
2008-01-10 4:13 ` Aneesh Kumar K.V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080103155046.GA7092@skywalker \
--to=aneesh.kumar@linux.vnet.ibm.com \
--cc=bob.picco@hp.com \
--cc=clameter@sgi.com \
--cc=kamezawa.hiroyu@jp.fujitsu.com \
--cc=lee.schermerhorn@hp.com \
--cc=linux-mm@kvack.org \
--cc=mel@skynet.ie \
--cc=nacc@us.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).