From: Christoph Lameter <clameter@sgi.com>
To: akpm@linux-foundation.org
Cc: linux-mm@kvack.org, Mel Gorman <mel@csn.ul.ie>
Subject: [patch 1/3] Eliminate the hot/cold distinction in the page allocator
Date: Mon, 11 Feb 2008 16:36:44 -0800 [thread overview]
Message-ID: <20080212003803.571820013@sgi.com> (raw)
In-Reply-To: 20080212003643.536643832@sgi.com
[-- Attachment #1: hotcold_1 --]
[-- Type: text/plain, Size: 4526 bytes --]
2.6.25-rc1 contains only a part of the patches that were done to get
rid of the cold/hot distinction. Performance tests showed that the list
operations added to simulate the hot/cold distinction using a single
list are worse than not having that distinction at all.
See the discussion and the tests that Mel Gorman performed with this patch at
http://marc.info/?t=119507025400001&r=1&w=2
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
---
include/linux/gfp.h | 3 +--
mm/page_alloc.c | 34 +++++++---------------------------
mm/swap.c | 2 +-
3 files changed, 9 insertions(+), 30 deletions(-)
Index: linux-2.6/include/linux/gfp.h
===================================================================
--- linux-2.6.orig/include/linux/gfp.h 2008-02-11 15:53:12.000000000 -0800
+++ linux-2.6/include/linux/gfp.h 2008-02-11 16:18:36.000000000 -0800
@@ -214,8 +214,7 @@ extern unsigned long FASTCALL(get_zeroed
extern void FASTCALL(__free_pages(struct page *page, unsigned int order));
extern void FASTCALL(free_pages(unsigned long addr, unsigned int order));
-extern void FASTCALL(free_hot_page(struct page *page));
-extern void FASTCALL(free_cold_page(struct page *page));
+extern void FASTCALL(free_a_page(struct page *page));
#define __free_page(page) __free_pages((page), 0)
#define free_page(addr) free_pages((addr),0)
Index: linux-2.6/mm/page_alloc.c
===================================================================
--- linux-2.6.orig/mm/page_alloc.c 2008-02-08 13:22:14.000000000 -0800
+++ linux-2.6/mm/page_alloc.c 2008-02-11 16:18:36.000000000 -0800
@@ -975,7 +975,7 @@ void mark_free_pages(struct zone *zone)
/*
* Free a 0-order page
*/
-static void free_hot_cold_page(struct page *page, int cold)
+void free_a_page(struct page *page)
{
struct zone *zone = page_zone(page);
struct per_cpu_pages *pcp;
@@ -995,10 +995,7 @@ static void free_hot_cold_page(struct pa
pcp = &zone_pcp(zone, get_cpu())->pcp;
local_irq_save(flags);
__count_vm_event(PGFREE);
- if (cold)
- list_add_tail(&page->lru, &pcp->list);
- else
- list_add(&page->lru, &pcp->list);
+ list_add(&page->lru, &pcp->list);
set_page_private(page, get_pageblock_migratetype(page));
pcp->count++;
if (pcp->count >= pcp->high) {
@@ -1009,16 +1006,6 @@ static void free_hot_cold_page(struct pa
put_cpu();
}
-void free_hot_page(struct page *page)
-{
- free_hot_cold_page(page, 0);
-}
-
-void free_cold_page(struct page *page)
-{
- free_hot_cold_page(page, 1);
-}
-
/*
* split_page takes a non-compound higher-order page, and splits it into
* n (1<<order) sub-pages: page[0..n]
@@ -1047,7 +1034,6 @@ static struct page *buffered_rmqueue(str
{
unsigned long flags;
struct page *page;
- int cold = !!(gfp_flags & __GFP_COLD);
int cpu;
int migratetype = allocflags_to_migratetype(gfp_flags);
@@ -1066,15 +1052,9 @@ again:
}
/* Find a page of the appropriate migrate type */
- if (cold) {
- list_for_each_entry_reverse(page, &pcp->list, lru)
- if (page_private(page) == migratetype)
- break;
- } else {
- list_for_each_entry(page, &pcp->list, lru)
- if (page_private(page) == migratetype)
- break;
- }
+ list_for_each_entry(page, &pcp->list, lru)
+ if (page_private(page) == migratetype)
+ break;
/* Allocate more to the pcp list if necessary */
if (unlikely(&page->lru == &pcp->list)) {
@@ -1677,14 +1657,14 @@ void __pagevec_free(struct pagevec *pvec
int i = pagevec_count(pvec);
while (--i >= 0)
- free_hot_cold_page(pvec->pages[i], pvec->cold);
+ free_a_page(pvec->pages[i]);
}
void __free_pages(struct page *page, unsigned int order)
{
if (put_page_testzero(page)) {
if (order == 0)
- free_hot_page(page);
+ free_a_page(page);
else
__free_pages_ok(page, order);
}
Index: linux-2.6/mm/swap.c
===================================================================
--- linux-2.6.orig/mm/swap.c 2008-02-07 19:07:05.000000000 -0800
+++ linux-2.6/mm/swap.c 2008-02-11 16:18:36.000000000 -0800
@@ -54,7 +54,7 @@ static void __page_cache_release(struct
del_page_from_lru(zone, page);
spin_unlock_irqrestore(&zone->lru_lock, flags);
}
- free_hot_page(page);
+ free_a_page(page);
}
static void put_compound_page(struct page *page)
--
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2008-02-12 0:36 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-12 0:36 [patch 0/3] Hotcold removal completion Christoph Lameter
2008-02-12 0:36 ` Christoph Lameter [this message]
2008-02-12 0:36 ` [patch 2/3] Remove GFP_COLD Christoph Lameter
2008-02-12 0:36 ` [patch 3/3] Remove cold field from pagevec Christoph Lameter
2008-02-12 6:32 ` [patch 0/3] Hotcold removal completion Nick Piggin
2008-02-12 7:57 ` Andrew Morton
2008-02-12 20:12 ` Christoph Lameter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080212003803.571820013@sgi.com \
--to=clameter@sgi.com \
--cc=akpm@linux-foundation.org \
--cc=linux-mm@kvack.org \
--cc=mel@csn.ul.ie \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).