From: Jack Steiner <steiner@sgi.com>
To: mingo@elte.hu, tglx@linutronix.de
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: [PATCH] - UV startup of slave cpus
Date: Wed, 16 Apr 2008 11:45:15 -0500 [thread overview]
Message-ID: <20080416164515.GA23371@sgi.com> (raw)
This patch changes smpboot.c so that it can start slave cpus running
in UV non-unique apicid mode. The SIPI must be sent using a UV-specific
mechanism.
Signed-off-by: Jack Steiner <steiner@sgi.com>
---
arch/x86/kernel/genx2apic_uv_x.c | 17 +++++++++++------
arch/x86/kernel/smpboot.c | 29 ++++++++++++++++++++---------
include/asm-x86/genapic_32.h | 1 +
3 files changed, 32 insertions(+), 15 deletions(-)
Built against git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
Index: linux/arch/x86/kernel/smpboot.c
===================================================================
--- linux.orig/arch/x86/kernel/smpboot.c 2008-04-16 10:56:44.000000000 -0500
+++ linux/arch/x86/kernel/smpboot.c 2008-04-16 10:59:42.000000000 -0500
@@ -61,6 +61,7 @@
#include <asm/mtrr.h>
#include <asm/nmi.h>
#include <asm/vmi.h>
+#include <asm/genapic.h>
#include <linux/mc146818rtc.h>
#include <mach_apic.h>
@@ -677,6 +678,12 @@ wakeup_secondary_cpu(int phys_apicid, un
unsigned long send_status, accept_status = 0;
int maxlvt, num_starts, j;
+ if (get_uv_system_type() == UV_NON_UNIQUE_APIC) {
+ send_status = uv_wakeup_secondary(phys_apicid, start_eip);
+ atomic_set(&init_deasserted, 1);
+ return send_status;
+ }
+
/*
* Be paranoid about clearing APIC errors.
*/
@@ -918,16 +925,19 @@ do_rest:
atomic_set(&init_deasserted, 0);
- Dprintk("Setting warm reset code and vector.\n");
+ if (get_uv_system_type() != UV_NON_UNIQUE_APIC) {
- store_NMI_vector(&nmi_high, &nmi_low);
+ Dprintk("Setting warm reset code and vector.\n");
- smpboot_setup_warm_reset_vector(start_ip);
- /*
- * Be paranoid about clearing APIC errors.
- */
- apic_write(APIC_ESR, 0);
- apic_read(APIC_ESR);
+ store_NMI_vector(&nmi_high, &nmi_low);
+
+ smpboot_setup_warm_reset_vector(start_ip);
+ /*
+ * Be paranoid about clearing APIC errors.
+ */
+ apic_write(APIC_ESR, 0);
+ apic_read(APIC_ESR);
+ }
/*
* Starting actual IPI sequence...
@@ -966,7 +976,8 @@ do_rest:
else
/* trampoline code not run */
printk(KERN_ERR "Not responding.\n");
- inquire_remote_apic(apicid);
+ if (get_uv_system_type() != UV_NON_UNIQUE_APIC)
+ inquire_remote_apic(apicid);
}
}
Index: linux/include/asm-x86/genapic_32.h
===================================================================
--- linux.orig/include/asm-x86/genapic_32.h 2008-04-16 10:56:46.000000000 -0500
+++ linux/include/asm-x86/genapic_32.h 2008-04-16 10:59:42.000000000 -0500
@@ -117,6 +117,7 @@ extern struct genapic *genapic;
enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC};
#define get_uv_system_type() UV_NONE
#define is_uv_system() 0
+#define uv_wakeup_secondary(a,b) 1
#endif
Index: linux/arch/x86/kernel/genx2apic_uv_x.c
===================================================================
--- linux.orig/arch/x86/kernel/genx2apic_uv_x.c 2008-04-16 10:56:44.000000000 -0500
+++ linux/arch/x86/kernel/genx2apic_uv_x.c 2008-04-16 10:59:42.000000000 -0500
@@ -61,26 +61,31 @@ int uv_wakeup_secondary(int phys_apicid,
val = (1UL << UVH_IPI_INT_SEND_SHFT) |
(phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
(((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
- (6 << UVH_IPI_INT_DELIVERY_MODE_SHFT);
+ APIC_DM_INIT;
+ uv_write_global_mmr64(nasid, UVH_IPI_INT, val);
+ mdelay(10);
+
+ val = (1UL << UVH_IPI_INT_SEND_SHFT) |
+ (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
+ (((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
+ APIC_DM_STARTUP;
uv_write_global_mmr64(nasid, UVH_IPI_INT, val);
return 0;
}
static void uv_send_IPI_one(int cpu, int vector)
{
- unsigned long val, apicid;
+ unsigned long val, apicid, lapicid;
int nasid;
apicid = per_cpu(x86_cpu_to_apicid, cpu); /* ZZZ - cache node-local ? */
+ lapicid = apicid & 0x3f; /* ZZZ macro needed */
nasid = uv_apicid_to_nasid(apicid);
val =
- (1UL << UVH_IPI_INT_SEND_SHFT) | (apicid <<
+ (1UL << UVH_IPI_INT_SEND_SHFT) | (lapicid <<
UVH_IPI_INT_APIC_ID_SHFT) |
(vector << UVH_IPI_INT_VECTOR_SHFT);
uv_write_global_mmr64(nasid, UVH_IPI_INT, val);
- printk(KERN_DEBUG
- "UV: IPI to cpu %d, apicid 0x%lx, vec %d, nasid%d, val 0x%lx\n",
- cpu, apicid, vector, nasid, val);
}
static void uv_send_IPI_mask(cpumask_t mask, int vector)
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
reply other threads:[~2008-04-16 16:45 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080416164515.GA23371@sgi.com \
--to=steiner@sgi.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).