From: Balbir Singh <balbir@linux.vnet.ibm.com>
To: linux-mm@kvack.org
Cc: Sudhir Kumar <skumar@linux.vnet.ibm.com>,
YAMAMOTO Takashi <yamamoto@valinux.co.jp>,
Paul Menage <menage@google.com>,
lizf@cn.fujitsu.com, linux-kernel@vger.kernel.org,
Pavel Emelianov <xemul@openvz.org>,
Balbir Singh <balbir@linux.vnet.ibm.com>,
Andrew Morton <akpm@linux-foundation.org>,
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Subject: [-mm][PATCH 3/4] cgroup mm owner callback changes to add task info (v5)
Date: Wed, 21 May 2008 20:59:59 +0530 [thread overview]
Message-ID: <20080521152959.15001.14495.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20080521152921.15001.65968.sendpatchset@localhost.localdomain>
This patch adds an additional field to the mm_owner callbacks. This field
is required to get to the mm that changed. Hold mmap_sem in write mode
before calling the mm_owner_changed callback
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
---
include/linux/cgroup.h | 3 ++-
kernel/cgroup.c | 4 +++-
kernel/exit.c | 3 +++
3 files changed, 8 insertions(+), 2 deletions(-)
diff -puN include/linux/cgroup.h~cgroup-add-task-to-mm-owner-callbacks include/linux/cgroup.h
--- linux-2.6.26-rc2/include/linux/cgroup.h~cgroup-add-task-to-mm-owner-callbacks 2008-05-21 20:56:54.000000000 +0530
+++ linux-2.6.26-rc2-balbir/include/linux/cgroup.h 2008-05-21 20:56:54.000000000 +0530
@@ -310,7 +310,8 @@ struct cgroup_subsys {
*/
void (*mm_owner_changed)(struct cgroup_subsys *ss,
struct cgroup *old,
- struct cgroup *new);
+ struct cgroup *new,
+ struct task_struct *p);
int subsys_id;
int active;
int disabled;
diff -puN kernel/cgroup.c~cgroup-add-task-to-mm-owner-callbacks kernel/cgroup.c
--- linux-2.6.26-rc2/kernel/cgroup.c~cgroup-add-task-to-mm-owner-callbacks 2008-05-21 20:56:54.000000000 +0530
+++ linux-2.6.26-rc2-balbir/kernel/cgroup.c 2008-05-21 20:56:54.000000000 +0530
@@ -2758,6 +2758,8 @@ void cgroup_fork_callbacks(struct task_s
* Called on every change to mm->owner. mm_init_owner() does not
* invoke this routine, since it assigns the mm->owner the first time
* and does not change it.
+ *
+ * The callbacks are invoked with mmap_sem held in read mode.
*/
void cgroup_mm_owner_callbacks(struct task_struct *old, struct task_struct *new)
{
@@ -2772,7 +2774,7 @@ void cgroup_mm_owner_callbacks(struct ta
if (oldcgrp == newcgrp)
continue;
if (ss->mm_owner_changed)
- ss->mm_owner_changed(ss, oldcgrp, newcgrp);
+ ss->mm_owner_changed(ss, oldcgrp, newcgrp, new);
}
}
}
diff -puN kernel/exit.c~cgroup-add-task-to-mm-owner-callbacks kernel/exit.c
--- linux-2.6.26-rc2/kernel/exit.c~cgroup-add-task-to-mm-owner-callbacks 2008-05-21 20:56:54.000000000 +0530
+++ linux-2.6.26-rc2-balbir/kernel/exit.c 2008-05-21 20:56:54.000000000 +0530
@@ -621,6 +621,7 @@ retry:
assign_new_owner:
BUG_ON(c == p);
get_task_struct(c);
+ down_write(&mm->mmap_sem);
/*
* The task_lock protects c->mm from changing.
* We always want mm->owner->mm == mm
@@ -634,12 +635,14 @@ assign_new_owner:
if (c->mm != mm) {
task_unlock(c);
put_task_struct(c);
+ up_write(&mm->mmap_sem);
goto retry;
}
cgroup_mm_owner_callbacks(mm->owner, c);
mm->owner = c;
task_unlock(c);
put_task_struct(c);
+ up_write(&mm->mmap_sem);
}
#endif /* CONFIG_MM_OWNER */
_
--
Warm Regards,
Balbir Singh
Linux Technology Center
IBM, ISTL
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2008-05-21 15:30 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-21 15:29 [-mm][PATCH 0/4] Add memrlimit controller (v5) Balbir Singh
2008-05-21 15:29 ` [-mm][PATCH 1/4] Add memrlimit controller documentation (v5) Balbir Singh
2008-05-22 4:16 ` Andrew Morton
2008-05-22 10:13 ` Balbir Singh
2008-05-21 15:29 ` [-mm][PATCH 2/4] Setup the memrlimit controller (v5) Balbir Singh
2008-05-22 4:18 ` Andrew Morton
2008-05-22 10:14 ` Balbir Singh
2008-06-11 17:10 ` Andrea Righi
2008-06-11 17:33 ` Balbir Singh
2008-06-11 18:48 ` Andrea Righi
2008-06-11 19:15 ` Andrew Morton
2008-06-11 20:17 ` Andrea Righi
2008-06-11 20:43 ` Andrew Morton
2008-06-11 22:47 ` Andrea Righi
2008-06-11 22:55 ` Andrew Morton
2008-06-11 23:04 ` Andrea Righi
2008-06-12 6:13 ` Balbir Singh
2008-06-12 8:52 ` Andrea Righi
2008-06-12 9:02 ` Andrew Morton
2008-06-12 9:12 ` Andrea Righi
2008-06-12 17:02 ` [PATCH -mm] PAGE_ALIGN(): correctly handle 64-bit values on 32-bit architectures Andrea Righi
2008-06-12 22:14 ` Andrea Righi
2008-06-13 9:37 ` Balbir Singh
2008-06-13 9:45 ` Li Zefan
2008-05-21 15:29 ` Balbir Singh [this message]
2008-05-22 4:19 ` [-mm][PATCH 3/4] cgroup mm owner callback changes to add task info (v5) Andrew Morton
2008-05-22 10:14 ` Balbir Singh
2008-05-21 15:30 ` [-mm][PATCH 4/4] Add memrlimit controller accounting and control (v5) Balbir Singh
2008-05-21 17:20 ` Vivek Goyal
2008-05-22 4:41 ` Balbir Singh
2008-05-22 4:24 ` Andrew Morton
2008-05-22 10:15 ` Balbir Singh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080521152959.15001.14495.sendpatchset@localhost.localdomain \
--to=balbir@linux.vnet.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=kamezawa.hiroyu@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=lizf@cn.fujitsu.com \
--cc=menage@google.com \
--cc=skumar@linux.vnet.ibm.com \
--cc=xemul@openvz.org \
--cc=yamamoto@valinux.co.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).