From: Nick Piggin <npiggin@suse.de>
To: Hugh Dickins <hugh@veritas.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>,
Linux Memory Management List <linux-mm@kvack.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Andrew Morton <akpm@linux-foundation.org>,
Lin Ming <ming.m.lin@intel.com>,
"Zhang, Yanmin" <yanmin_zhang@linux.intel.com>,
Christoph Lameter <cl@linux-foundation.org>
Subject: Re: [patch] SLQB slab allocator
Date: Fri, 23 Jan 2009 04:55:03 +0100 [thread overview]
Message-ID: <20090123035503.GD20098@wotan.suse.de> (raw)
In-Reply-To: <Pine.LNX.4.64.0901211705570.7020@blonde.anvils>
On Wed, Jan 21, 2009 at 06:10:12PM +0000, Hugh Dickins wrote:
> On Wed, 21 Jan 2009, Nick Piggin wrote:
> >
> > Since last posted, I've cleaned up a few bits and pieces, (hopefully)
> > fixed a known bug where it wouldn't boot on memoryless nodes (I don't
> > have a system to test with), and improved performance and reduced
> > locking somewhat for node-specific and interleaved allocations.
>
> I haven't reviewed your postings, but I did give the previous version
> of your patch a try on all my machines. Some observations and one patch.
Great, thanks!
> I was initially _very_ impressed by how well it did on my venerable
> tmpfs loop swapping loads, where I'd expected next to no effect; but
> that turned out to be because on three machines I'd been using SLUB,
> without remembering how default slub_max_order got raised from 1 to 3
> in 2.6.26 (hmm, and Documentation/vm/slub.txt not updated).
>
> That's been making SLUB behave pretty badly (e.g. elapsed time 30%
> more than SLAB) with swapping loads on most of my machines. Though
> oddly one seems immune, and another takes four times as long: guess
> it depends on how close to thrashing, but probably more to investigate
> there. I think my original SLUB versus SLAB comparisons were done on
> the immune one: as I remember, SLUB and SLAB were equivalent on those
> loads when SLUB came in, but even with boot option slub_max_order=1,
> SLUB is still slower than SLAB on such tests (e.g. 2% slower).
> FWIW - swapping loads are not what anybody should tune for.
Yeah, that's to be expected with higher order allocations I think. Does
your immune machine simply have fewer CPUs and thus doesn't use such
high order allocations?
> So in fact SLQB comes in very much like SLAB, as I think you'd expect:
> slightly ahead of it on most of the machines, but probably in the noise.
> (SLOB behaves decently: not a winner, but no catastrophic behaviour.)
>
> What I love most about SLUB is the way you can reasonably build with
> CONFIG_SLUB_DEBUG=y, very little impact, then switch on the specific
> debugging you want with a boot option when you want it. That was a
> great stride forward, which you've followed in SLQB: so I'd have to
> prefer SLQB to SLAB (on debuggability) and to SLUB (on high orders).
It is nice. All credit to Christoph for that (and the fine grained
sysfs code).
> I do hate the name SLQB. Despite having no experience of databases,
> I find it almost impossible to type, coming out as SQLB most times.
> Wish you'd invented a plausible vowel instead of the Q; but probably
> too late for that.
Yeah, apologies for the name :P
> init/Kconfig describes it as "Qeued allocator": should say "Queued".
Thanks.
> Documentation/vm/slqbinfo.c gives several compilation warnings:
> I'd rather leave it to you to fix them, maybe the unused variables
> are about to be used, or maybe there's much worse wrong with it
> than a few compilation warnings, I didn't investigate.
OK.
> The only bug I found (but you'll probably want to change the patch
> - which I've rediffed to today's slqb.c, but not retested).
>
> On fake NUMA I hit kernel BUG at mm/slqb.c:1107! claim_remote_free_list()
> is doing several things without remote_free.lock: that VM_BUG_ON is unsafe
> for one, and even if others are somehow safe today, it will be more robust
> to take the lock sooner.
Good catch, thanks. The BUG should be OK where it is if we only
claim the remote free list when remote_free_check is is set, but
some of the periodic reaping and teardown code calls it unconditionally.
But it's not critical so it should definitely go inside the lock.
> I moved the prefetchw(head) down to where we know it's going to be the head,
> and replaced the offending VM_BUG_ON by a later WARN_ON which you'd probably
> better remove altogether: once we got the lock, it's hardly interesting.
Right, I'll probably do that. Thanks!
> Signed-off-by: Hugh Dickins <hugh@veritas.com>
> ---
>
> mm/slqb.c | 17 +++++++++--------
> 1 file changed, 9 insertions(+), 8 deletions(-)
>
> --- slqb/mm/slqb.c.orig 2009-01-21 15:23:54.000000000 +0000
> +++ slqb/mm/slqb.c 2009-01-21 15:32:44.000000000 +0000
> @@ -1115,17 +1115,12 @@ static void claim_remote_free_list(struc
> void **head, **tail;
> int nr;
>
> - VM_BUG_ON(!l->remote_free.list.head != !l->remote_free.list.tail);
> -
> if (!l->remote_free.list.nr)
> return;
>
> + spin_lock(&l->remote_free.lock);
> l->remote_free_check = 0;
> head = l->remote_free.list.head;
> - /* Get the head hot for the likely subsequent allocation or flush */
> - prefetchw(head);
> -
> - spin_lock(&l->remote_free.lock);
> l->remote_free.list.head = NULL;
> tail = l->remote_free.list.tail;
> l->remote_free.list.tail = NULL;
> @@ -1133,9 +1128,15 @@ static void claim_remote_free_list(struc
> l->remote_free.list.nr = 0;
> spin_unlock(&l->remote_free.lock);
>
> - if (!l->freelist.nr)
> + WARN_ON(!head + !tail != !nr + !nr);
> + if (!nr)
> + return;
> +
> + if (!l->freelist.nr) {
> + /* Get head hot for likely subsequent allocation or flush */
> + prefetchw(head);
> l->freelist.head = head;
> - else
> + } else
> set_freepointer(s, l->freelist.tail, head);
> l->freelist.tail = tail;
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2009-01-23 3:55 UTC|newest]
Thread overview: 99+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-21 14:30 [patch] SLQB slab allocator Nick Piggin
2009-01-21 14:59 ` Ingo Molnar
2009-01-21 15:17 ` Nick Piggin
2009-01-21 16:56 ` Nick Piggin
2009-01-21 17:40 ` Ingo Molnar
2009-01-23 3:31 ` Nick Piggin
2009-01-23 6:14 ` Nick Piggin
2009-01-23 12:56 ` Ingo Molnar
2009-01-21 17:59 ` Joe Perches
2009-01-23 3:35 ` Nick Piggin
2009-01-23 4:00 ` Joe Perches
2009-01-21 18:10 ` Hugh Dickins
2009-01-22 10:01 ` Pekka Enberg
2009-01-22 12:47 ` Hugh Dickins
2009-01-23 14:23 ` Hugh Dickins
2009-01-23 14:30 ` Pekka Enberg
2009-02-02 3:38 ` Zhang, Yanmin
2009-02-02 9:00 ` Pekka Enberg
2009-02-02 15:00 ` Christoph Lameter
2009-02-03 1:34 ` Zhang, Yanmin
2009-02-03 7:29 ` Zhang, Yanmin
2009-02-03 12:18 ` Hugh Dickins
2009-02-04 2:21 ` Zhang, Yanmin
2009-02-05 19:04 ` Hugh Dickins
2009-02-06 0:47 ` Zhang, Yanmin
2009-02-06 8:57 ` Pekka Enberg
2009-02-06 12:33 ` Hugh Dickins
2009-02-10 8:56 ` Zhang, Yanmin
2009-02-02 11:50 ` Hugh Dickins
2009-01-23 3:55 ` Nick Piggin [this message]
2009-01-23 13:57 ` Hugh Dickins
2009-01-22 8:45 ` Zhang, Yanmin
2009-01-23 3:57 ` Nick Piggin
2009-01-23 9:00 ` Nick Piggin
2009-01-23 13:34 ` Hugh Dickins
2009-01-23 13:44 ` Nick Piggin
2009-01-23 9:55 ` Andi Kleen
2009-01-23 10:13 ` Pekka Enberg
2009-01-23 11:25 ` Nick Piggin
2009-01-23 11:57 ` Andi Kleen
2009-01-23 13:18 ` Nick Piggin
2009-01-23 14:04 ` Andi Kleen
2009-01-23 14:27 ` Nick Piggin
2009-01-23 15:06 ` Andi Kleen
2009-01-23 15:15 ` Nick Piggin
2009-01-23 12:55 ` Nick Piggin
-- strict thread matches above, loose matches on Subject: below --
2009-01-14 9:04 Nick Piggin
2009-01-14 10:53 ` Pekka Enberg
2009-01-14 11:47 ` Nick Piggin
2009-01-14 13:44 ` Pekka Enberg
2009-01-14 14:22 ` Nick Piggin
2009-01-14 14:45 ` Pekka Enberg
2009-01-14 15:09 ` Nick Piggin
2009-01-14 15:22 ` Nick Piggin
2009-01-14 15:30 ` Pekka Enberg
2009-01-14 15:59 ` Nick Piggin
2009-01-14 18:40 ` Christoph Lameter
2009-01-15 6:19 ` Nick Piggin
2009-01-15 20:47 ` Christoph Lameter
2009-01-16 3:43 ` Nick Piggin
2009-01-16 21:25 ` Christoph Lameter
2009-01-19 6:18 ` Nick Piggin
2009-01-22 0:13 ` Christoph Lameter
2009-01-22 9:27 ` Pekka Enberg
2009-01-22 9:30 ` Zhang, Yanmin
2009-01-22 9:33 ` Pekka Enberg
2009-01-23 15:32 ` Christoph Lameter
2009-01-23 15:37 ` Pekka Enberg
2009-01-23 15:42 ` Christoph Lameter
2009-01-23 15:32 ` Christoph Lameter
2009-01-23 4:09 ` Nick Piggin
2009-01-23 15:41 ` Christoph Lameter
2009-01-23 15:53 ` Nick Piggin
2009-01-26 17:28 ` Christoph Lameter
2009-02-03 1:53 ` Nick Piggin
2009-02-03 17:33 ` Christoph Lameter
2009-02-03 18:42 ` Pekka Enberg
2009-02-03 18:47 ` Pekka Enberg
2009-02-04 4:22 ` Nick Piggin
2009-02-04 20:09 ` Christoph Lameter
2009-02-05 3:18 ` Nick Piggin
2009-02-04 20:10 ` Christoph Lameter
2009-02-05 3:14 ` Nick Piggin
2009-02-04 4:07 ` Nick Piggin
2009-01-14 18:01 ` Christoph Lameter
2009-01-15 6:03 ` Nick Piggin
2009-01-15 20:05 ` Christoph Lameter
2009-01-16 3:19 ` Nick Piggin
2009-01-16 21:07 ` Christoph Lameter
2009-01-19 5:47 ` Nick Piggin
2009-01-22 0:19 ` Christoph Lameter
2009-01-23 4:17 ` Nick Piggin
2009-01-23 15:52 ` Christoph Lameter
2009-01-23 16:10 ` Nick Piggin
2009-01-23 17:09 ` Nick Piggin
2009-01-26 17:46 ` Christoph Lameter
2009-02-03 1:42 ` Nick Piggin
2009-01-26 17:34 ` Christoph Lameter
2009-02-03 1:48 ` Nick Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090123035503.GD20098@wotan.suse.de \
--to=npiggin@suse.de \
--cc=akpm@linux-foundation.org \
--cc=cl@linux-foundation.org \
--cc=hugh@veritas.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=ming.m.lin@intel.com \
--cc=penberg@cs.helsinki.fi \
--cc=yanmin_zhang@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).