linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Mel Gorman <mel@csn.ul.ie>
To: Christoph Lameter <cl@linux-foundation.org>
Cc: Linux Memory Management List <linux-mm@kvack.org>,
	Pekka Enberg <penberg@cs.helsinki.fi>,
	Rik van Riel <riel@redhat.com>,
	KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>,
	Johannes Weiner <hannes@cmpxchg.org>,
	Nick Piggin <npiggin@suse.de>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Lin Ming <ming.m.lin@intel.com>,
	Zhang Yanmin <yanmin_zhang@linux.intel.com>,
	Peter Zijlstra <peterz@infradead.org>
Subject: Re: [PATCH 24/35] Convert gfp_zone() to use a table of precalculated values
Date: Mon, 16 Mar 2009 16:45:50 +0000	[thread overview]
Message-ID: <20090316164550.GL24293@csn.ul.ie> (raw)
In-Reply-To: <alpine.DEB.1.10.0903161218170.32577@qirst.com>

On Mon, Mar 16, 2009 at 12:19:06PM -0400, Christoph Lameter wrote:
> On Mon, 16 Mar 2009, Mel Gorman wrote:
> 
> > diff --git a/init/main.c b/init/main.c
> > index 8442094..08a5663 100644
> > --- a/init/main.c
> > +++ b/init/main.c
> > @@ -573,6 +573,7 @@ asmlinkage void __init start_kernel(void)
> >  	 * fragile until we cpu_idle() for the first time.
> >  	 */
> >  	preempt_disable();
> > +	init_gfp_zone_table();
> >  	build_all_zonelists();
> >  	page_alloc_init();
> >  	printk(KERN_NOTICE "Kernel command line: %s\n", boot_command_line);
> > diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> > index bc491fa..d76f57d 100644
> > --- a/mm/page_alloc.c
> > +++ b/mm/page_alloc.c
> > @@ -70,6 +70,7 @@ EXPORT_SYMBOL(node_states);
> >  unsigned long totalram_pages __read_mostly;
> >  unsigned long totalreserve_pages __read_mostly;
> >  unsigned long highest_memmap_pfn __read_mostly;
> > +int gfp_zone_table[GFP_ZONEMASK] __read_mostly;
> >  int static_num_online_nodes __read_mostly;
> >  int percpu_pagelist_fraction;
> >
> > @@ -4569,7 +4570,7 @@ static void setup_per_zone_inactive_ratio(void)
> >   * 8192MB:	11584k
> >   * 16384MB:	16384k
> >   */
> > -static int __init init_per_zone_pages_min(void)
> > +static int init_per_zone_pages_min(void)
> >  {
> >  	unsigned long lowmem_kbytes;
> >
> > @@ -4587,6 +4588,39 @@ static int __init init_per_zone_pages_min(void)
> >  }
> >  module_init(init_per_zone_pages_min)
> >
> > +static inline int __init gfp_flags_to_zone(gfp_t flags)
> > +{
> > +#ifdef CONFIG_ZONE_DMA
> > +	if (flags & __GFP_DMA)
> > +		return ZONE_DMA;
> > +#endif
> > +#ifdef CONFIG_ZONE_DMA32
> > +	if (flags & __GFP_DMA32)
> > +		return ZONE_DMA32;
> > +#endif
> > +	if ((flags & (__GFP_HIGHMEM | __GFP_MOVABLE)) ==
> > +			(__GFP_HIGHMEM | __GFP_MOVABLE))
> > +		return ZONE_MOVABLE;
> > +#ifdef CONFIG_HIGHMEM
> > +	if (flags & __GFP_HIGHMEM)
> > +		return ZONE_HIGHMEM;
> > +#endif
> > +	return ZONE_NORMAL;
> > +}
> > +
> > +/*
> > + * For each possible combination of zone modifier flags, we calculate
> > + * what zone it should be using. This consumes a cache line in most
> > + * cases but avoids a number of branches in the allocator fast path
> > + */
> > +void __init init_gfp_zone_table(void)
> > +{
> > +	gfp_t gfp_flags;
> > +
> > +	for (gfp_flags = 0; gfp_flags < GFP_ZONEMASK; gfp_flags++)
> > +		gfp_zone_table[gfp_flags] = gfp_flags_to_zone(gfp_flags);
> > +}
> > +
> 
> This is all known at compile time. The table can be calculated at compile
> time with some ifdefs and then we do not need the init_gfp_zone_table().
> 

The last discussion didn't come up with something that could generate such
a table and still be correct in all cases. I guess someone could do it all
by hand but it was going to be an error prone exercise. I left the patch
as-is as a result.

-- 
Mel Gorman
Part-time Phd Student                          Linux Technology Center
University of Limerick                         IBM Dublin Software Lab

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  reply	other threads:[~2009-03-16 16:45 UTC|newest]

Thread overview: 94+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-03-16  9:45 [PATCH 00/35] Cleanup and optimise the page allocator V3 Mel Gorman
2009-03-16  9:45 ` [PATCH 01/35] Replace __alloc_pages_internal() with __alloc_pages_nodemask() Mel Gorman
2009-03-16 15:49   ` Christoph Lameter
2009-03-16  9:45 ` [PATCH 02/35] Do not sanity check order in the fast path Mel Gorman
2009-03-16 15:52   ` Christoph Lameter
2009-03-16  9:45 ` [PATCH 03/35] Do not check NUMA node ID when the caller knows the node is valid Mel Gorman
2009-03-16  9:45 ` [PATCH 04/35] Check only once if the zonelist is suitable for the allocation Mel Gorman
2009-03-16  9:46 ` [PATCH 05/35] Break up the allocator entry point into fast and slow paths Mel Gorman
2009-03-16  9:46 ` [PATCH 06/35] Move check for disabled anti-fragmentation out of fastpath Mel Gorman
2009-03-16 15:54   ` Christoph Lameter
2009-03-16  9:46 ` [PATCH 07/35] Check in advance if the zonelist needs additional filtering Mel Gorman
2009-03-16  9:46 ` [PATCH 08/35] Calculate the preferred zone for allocation only once Mel Gorman
2009-03-16  9:46 ` [PATCH 09/35] Calculate the migratetype " Mel Gorman
2009-03-16  9:46 ` [PATCH 10/35] Calculate the alloc_flags " Mel Gorman
2009-03-16  9:46 ` [PATCH 11/35] Calculate the cold parameter " Mel Gorman
2009-03-16  9:46 ` [PATCH 12/35] Remove a branch by assuming __GFP_HIGH == ALLOC_HIGH Mel Gorman
2009-03-16  9:46 ` [PATCH 13/35] Inline __rmqueue_smallest() Mel Gorman
2009-03-16  9:46 ` [PATCH 14/35] Inline buffered_rmqueue() Mel Gorman
2009-03-16  9:46 ` [PATCH 15/35] Inline __rmqueue_fallback() Mel Gorman
2009-03-16 15:57   ` Christoph Lameter
2009-03-16 16:25     ` Mel Gorman
2009-03-16  9:46 ` [PATCH 16/35] Save text by reducing call sites of __rmqueue() Mel Gorman
2009-03-16  9:46 ` [PATCH 17/35] Do not call get_pageblock_migratetype() more than necessary Mel Gorman
2009-03-16 16:00   ` Christoph Lameter
2009-03-16  9:46 ` [PATCH 18/35] Do not disable interrupts in free_page_mlock() Mel Gorman
2009-03-16 16:05   ` Christoph Lameter
2009-03-16 16:29     ` Mel Gorman
2009-03-16  9:46 ` [PATCH 19/35] Do not setup zonelist cache when there is only one node Mel Gorman
2009-03-16 16:06   ` Christoph Lameter
2009-03-16  9:46 ` [PATCH 20/35] Use a pre-calculated value for num_online_nodes() Mel Gorman
2009-03-16 11:42   ` Nick Piggin
2009-03-16 11:46     ` Nick Piggin
2009-03-16 16:08   ` Christoph Lameter
2009-03-16 16:36     ` Mel Gorman
2009-03-16 16:47       ` Christoph Lameter
2009-03-18 15:08         ` Mel Gorman
2009-03-18 16:58           ` Christoph Lameter
2009-03-18 18:01             ` Mel Gorman
2009-03-18 19:10               ` Christoph Lameter
2009-03-19 20:43                 ` Christoph Lameter
2009-03-19 21:29                   ` Mel Gorman
2009-03-19 22:22                     ` Christoph Lameter
2009-03-19 22:33                       ` Mel Gorman
2009-03-19 22:42                         ` Christoph Lameter
2009-03-19 22:52                           ` Mel Gorman
2009-03-19 22:06                   ` Mel Gorman
2009-03-19 22:39                     ` Christoph Lameter
2009-03-19 22:21                   ` Mel Gorman
2009-03-19 22:24                     ` Christoph Lameter
2009-03-19 23:04                       ` Mel Gorman
2009-03-16  9:46 ` [PATCH 21/35] Do not check for compound pages during the page allocator sanity checks Mel Gorman
2009-03-16 16:09   ` Christoph Lameter
2009-03-16  9:46 ` [PATCH 22/35] Use allocation flags as an index to the zone watermark Mel Gorman
2009-03-16 16:11   ` Christoph Lameter
2009-03-16  9:46 ` [PATCH 23/35] Update NR_FREE_PAGES only as necessary Mel Gorman
2009-03-16 16:17   ` Christoph Lameter
2009-03-16 16:42     ` Mel Gorman
2009-03-16 16:48       ` Christoph Lameter
2009-03-16 16:58         ` Mel Gorman
2009-03-16  9:46 ` [PATCH 24/35] Convert gfp_zone() to use a table of precalculated values Mel Gorman
2009-03-16 16:19   ` Christoph Lameter
2009-03-16 16:45     ` Mel Gorman [this message]
2009-03-16  9:46 ` [PATCH 25/35] Re-sort GFP flags and fix whitespace alignment for easier reading Mel Gorman
2009-03-16  9:46 ` [PATCH 26/35] Use the per-cpu allocator for orders up to PAGE_ALLOC_COSTLY_ORDER Mel Gorman
2009-03-16 16:26   ` Christoph Lameter
2009-03-16 16:47     ` Mel Gorman
2009-03-16  9:46 ` [PATCH 27/35] Split per-cpu list into one-list-per-migrate-type Mel Gorman
2009-03-16  9:46 ` [PATCH 28/35] Batch free pages from migratetype per-cpu lists Mel Gorman
2009-03-16  9:46 ` [PATCH 29/35] Do not store the PCP high and batch watermarks in the per-cpu structure Mel Gorman
2009-03-16 16:30   ` Christoph Lameter
2009-03-16  9:46 ` [PATCH 30/35] Skip the PCP list search by counting the order and type of pages on list Mel Gorman
2009-03-16 16:31   ` Christoph Lameter
2009-03-16 16:51     ` Mel Gorman
2009-03-16  9:46 ` [PATCH 31/35] Optimistically check the first page on the PCP free list is suitable Mel Gorman
2009-03-16 16:33   ` Christoph Lameter
2009-03-16 16:52     ` Mel Gorman
2009-03-16  9:46 ` [PATCH 32/35] Inline next_zones_zonelist() of the zonelist scan in the fastpath Mel Gorman
2009-03-16  9:46 ` [PATCH 33/35] Do not merge buddies until they are needed by a high-order allocation or anti-fragmentation Mel Gorman
2009-03-16  9:46 ` [PATCH 34/35] Allow compound pages to be stored on the PCP lists Mel Gorman
2009-03-16 16:47   ` Christoph Lameter
2009-03-16  9:46 ` [PATCH 35/35] Allow up to 4MB PCP lists due to compound pages Mel Gorman
2009-03-16 10:40 ` [PATCH 00/35] Cleanup and optimise the page allocator V3 Nick Piggin
2009-03-16 11:19   ` Mel Gorman
2009-03-16 11:33     ` Nick Piggin
2009-03-16 12:02       ` Mel Gorman
2009-03-16 12:25         ` Nick Piggin
2009-03-16 13:32           ` Mel Gorman
2009-03-16 15:53             ` Nick Piggin
2009-03-16 16:56               ` Mel Gorman
2009-03-16 17:05                 ` Nick Piggin
2009-03-18 15:07                   ` Mel Gorman
2009-03-16 11:45 ` Nick Piggin
2009-03-16 12:11   ` Mel Gorman
2009-03-16 12:28     ` Nick Piggin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090316164550.GL24293@csn.ul.ie \
    --to=mel@csn.ul.ie \
    --cc=cl@linux-foundation.org \
    --cc=hannes@cmpxchg.org \
    --cc=kosaki.motohiro@jp.fujitsu.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=ming.m.lin@intel.com \
    --cc=npiggin@suse.de \
    --cc=penberg@cs.helsinki.fi \
    --cc=peterz@infradead.org \
    --cc=riel@redhat.com \
    --cc=yanmin_zhang@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).