From: Ed Tomlinson <edt@aei.ca>
To: Nitin Gupta <ngupta@vflare.org>
Cc: linux-mm <linux-mm@kvack.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 0/8] zcache: page cache compression support
Date: Sat, 17 Jul 2010 17:13:34 -0400 [thread overview]
Message-ID: <201007171713.34903.edt@aei.ca> (raw)
In-Reply-To: <1279283870-18549-1-git-send-email-ngupta@vflare.org>
Nitin,
Would you have all this in a git tree somewhere?
Considering getting this working requires 24 patches it would really help with testing.
TIA
Ed Tomlinson
On Friday 16 July 2010 08:37:42 you wrote:
> Frequently accessed filesystem data is stored in memory to reduce access to
> (much) slower backing disks. Under memory pressure, these pages are freed and
> when needed again, they have to be read from disks again. When combined working
> set of all running application exceeds amount of physical RAM, we get extereme
> slowdown as reading a page from disk can take time in order of milliseconds.
>
> Memory compression increases effective memory size and allows more pages to
> stay in RAM. Since de/compressing memory pages is several orders of magnitude
> faster than disk I/O, this can provide signifant performance gains for many
> workloads. Also, with multi-cores becoming common, benefits of reduced disk I/O
> should easily outweigh the problem of increased CPU usage.
>
> It is implemented as a "backend" for cleancache_ops [1] which provides
> callbacks for events such as when a page is to be removed from the page cache
> and when it is required again. We use them to implement a 'second chance' cache
> for these evicted page cache pages by compressing and storing them in memory
> itself.
>
> We only keep pages that compress to PAGE_SIZE/2 or less. Compressed chunks are
> stored using xvmalloc memory allocator which is already being used by zram
> driver for the same purpose. Zero-filled pages are checked and no memory is
> allocated for them.
>
> A separate "pool" is created for each mount instance for a cleancache-aware
> filesystem. Each incoming page is identified with <pool_id, inode_no, index>
> where inode_no identifies file within the filesystem corresponding to pool_id
> and index is offset of the page within this inode. Within a pool, inodes are
> maintained in an rb-tree and each of its nodes points to a separate radix-tree
> which maintains list of pages within that inode.
>
> While compression reduces disk I/O, it also reduces the space available for
> normal (uncompressed) page cache. This can result in more frequent page cache
> reclaim and thus higher CPU overhead. Thus, it's important to maintain good hit
> rate for compressed cache or increased CPU overhead can nullify any other
> benefits. This requires adaptive (compressed) cache resizing and page
> replacement policies that can maintain optimal cache size and quickly reclaim
> unused compressed chunks. This work is yet to be done. However, in the current
> state, it allows manually resizing cache size using (per-pool) sysfs node
> 'memlimit' which in turn frees any excess pages *sigh* randomly.
>
> Finally, it uses percpu stats and compression buffers to allow better
> performance on multi-cores. Still, there are known bottlenecks like a single
> xvmalloc mempool per zcache pool and few others. I will work on this when I
> start with profiling.
>
> * Performance numbers:
> - Tested using iozone filesystem benchmark
> - 4 CPUs, 1G RAM
> - Read performance gain: ~2.5X
> - Random read performance gain: ~3X
> - In general, performance gains for every kind of I/O
>
> Test details with graphs can be found here:
> http://code.google.com/p/compcache/wiki/zcacheIOzone
>
> If I can get some help with testing, it would be intersting to find its
> effect in more real-life workloads. In particular, I'm intersted in finding
> out its effect in KVM virtualization case where it can potentially allow
> running more number of VMs per-host for a given amount of RAM. With zcache
> enabled, VMs can be assigned much smaller amount of memory since host can now
> hold bulk of page-cache pages, allowing VMs to maintain similar level of
> performance while a greater number of them can be hosted.
>
> * How to test:
> All patches are against 2.6.35-rc5:
>
> - First, apply all prerequisite patches here:
> http://compcache.googlecode.com/hg/sub-projects/zcache_base_patches
>
> - Then apply this patch series; also uploaded here:
> http://compcache.googlecode.com/hg/sub-projects/zcache_patches
>
>
> Nitin Gupta (8):
> Allow sharing xvmalloc for zram and zcache
> Basic zcache functionality
> Create sysfs nodes and export basic statistics
> Shrink zcache based on memlimit
> Eliminate zero-filled pages
> Compress pages using LZO
> Use xvmalloc to store compressed chunks
> Document sysfs entries
>
> Documentation/ABI/testing/sysfs-kernel-mm-zcache | 53 +
> drivers/staging/Makefile | 2 +
> drivers/staging/zram/Kconfig | 22 +
> drivers/staging/zram/Makefile | 5 +-
> drivers/staging/zram/xvmalloc.c | 8 +
> drivers/staging/zram/zcache_drv.c | 1312 ++++++++++++++++++++++
> drivers/staging/zram/zcache_drv.h | 90 ++
> 7 files changed, 1491 insertions(+), 1 deletions(-)
> create mode 100644 Documentation/ABI/testing/sysfs-kernel-mm-zcache
> create mode 100644 drivers/staging/zram/zcache_drv.c
> create mode 100644 drivers/staging/zram/zcache_drv.h
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2010-07-17 21:13 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-16 12:37 [PATCH 0/8] zcache: page cache compression support Nitin Gupta
2010-07-16 12:37 ` [PATCH 1/8] Allow sharing xvmalloc for zram and zcache Nitin Gupta
2010-07-17 18:10 ` Rik van Riel
2010-07-16 12:37 ` [PATCH 2/8] Basic zcache functionality Nitin Gupta
2010-07-18 8:14 ` Pekka Enberg
2010-07-18 9:45 ` Nitin Gupta
2010-07-18 8:27 ` Pekka Enberg
2010-07-18 8:44 ` Eric Dumazet
2010-07-18 9:51 ` Nitin Gupta
2010-07-16 12:37 ` [PATCH 3/8] Create sysfs nodes and export basic statistics Nitin Gupta
2010-07-16 12:37 ` [PATCH 4/8] Shrink zcache based on memlimit Nitin Gupta
2010-07-20 23:03 ` Minchan Kim
2010-07-21 4:52 ` Nitin Gupta
2010-07-21 11:32 ` Ed Tomlinson
2010-07-23 19:23 ` Nitin Gupta
2010-07-16 12:37 ` [PATCH 5/8] Eliminate zero-filled pages Nitin Gupta
2010-07-16 12:37 ` [PATCH 6/8] Compress pages using LZO Nitin Gupta
2010-07-16 12:37 ` [PATCH 7/8] Use xvmalloc to store compressed chunks Nitin Gupta
2010-07-18 7:53 ` Pekka Enberg
2010-07-18 8:21 ` Nitin Gupta
2010-07-19 4:36 ` Minchan Kim
2010-07-19 6:48 ` Nitin Gupta
2010-07-16 12:37 ` [PATCH 8/8] Document sysfs entries Nitin Gupta
2010-07-17 21:13 ` Ed Tomlinson [this message]
2010-07-18 2:23 ` [PATCH 0/8] zcache: page cache compression support Nitin Gupta
2010-07-18 7:50 ` Pekka Enberg
2010-07-18 8:12 ` Nitin Gupta
2010-07-19 19:57 ` Dan Magenheimer
2010-07-20 13:50 ` Nitin Gupta
2010-07-20 14:28 ` Dan Magenheimer
2010-07-21 4:27 ` Nitin Gupta
2010-07-21 17:37 ` Dan Magenheimer
2010-07-22 19:14 ` Greg KH
2010-07-22 19:54 ` Dan Magenheimer
2010-07-22 21:00 ` Greg KH
2011-01-10 13:16 ` Kirill A. Shutemov
2011-01-18 17:53 ` Dan Magenheimer
2011-01-20 12:33 ` Nitin Gupta
2011-01-20 12:47 ` Christoph Hellwig
2011-01-20 13:16 ` Pekka Enberg
2011-01-20 13:58 ` Nitin Gupta
[not found] <575348163.1113381279906498028.JavaMail.root@zmail06.collab.prod.int.phx2.redhat.com>
2010-07-23 17:36 ` caiqian
2010-07-23 17:41 ` CAI Qian
2010-07-23 18:02 ` CAI Qian
2010-07-24 14:41 ` Valdis.Kletnieks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201007171713.34903.edt@aei.ca \
--to=edt@aei.ca \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=ngupta@vflare.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).