linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Wu Fengguang <fengguang.wu@intel.com>
To: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@linux.intel.com>,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	Li Shaohua <shaohua.li@intel.com>
Subject: Re: [TESTCASE] Clean pages clogging the VM
Date: Thu, 19 Aug 2010 00:07:31 +0800	[thread overview]
Message-ID: <20100818160731.GA15002@localhost> (raw)
In-Reply-To: <20100818160613.GE9431@localhost>

On Thu, Aug 19, 2010 at 12:06:13AM +0800, Wu Fengguang wrote:
> On Wed, Aug 18, 2010 at 04:13:08PM +0200, Johannes Weiner wrote:
> > Hi Matthew,
> > 
> > On Tue, Aug 17, 2010 at 03:50:01PM -0400, Matthew Wilcox wrote:
> > > 
> > > No comment on this?  Was it just that I posted it during the VM summit?
> > 
> > I have not forgotten about it.  I just have a hard time reproducing
> > those extreme stalls you observed.
> > 
> > Running that test on a 2.5GHz machine with 2G of memory gives me
> > stalls of up to half a second.  The patchset I am experimenting with
> > gets me down to peaks of 70ms, but it needs further work.
> > 
> > Mapped file pages get two rounds on the LRU list, so once the VM
> > starts scanning, it has to go through all of them twice and can only
> > reclaim them on the second encounter.
> > 
> > At that point, since we scan without making progress, we start waiting
> > for IO, which is not happening in this case, so we sit there until a
> > timeout expires.
> 
> Right, this could lead to some 1s stall. Shaohua and me also noticed
> this when investigating the responsiveness issues. And we are wondering
> if it makes sense to do congestion_wait() only when the bdi is really
> congested? There are no IO underway anyway in this case.
> 
> > This stupid-waiting can be improved, and I am working on that.  But
> 
> Yeah, stupid waiting :)
> 
> > since I can not reproduce your observations, I don't know if this is
> > the (sole) source of the problem.  Can I send you patches?
> 
> Sure.
> 
> > > On Mon, Aug 09, 2010 at 09:30:00AM -0400, Matthew Wilcox wrote:
> > > > 
> > > > This testcase shows some odd behaviour from the Linux VM.
> > > > 
> > > > It creates a 1TB sparse file, mmaps it, and randomly reads locations 
> > > > in it.  Due to the file being entirely sparse, the VM allocates new pages
> > > > and zeroes them.  Initially, it runs very fast, taking on the order of
> > > > 2.7 to 4us per page fault.  Eventually, the VM runs out of free pages,
> > > > and starts doing huge amounts of work trying to figure out which of
> > > > these clean pages to throw away.
> > 
> > This is similar to one of my test cases for:
> > 
> > 	6457474 vmscan: detect mapped file pages used only once
> > 	31c0569 vmscan: drop page_mapping_inuse()
> > 	dfc8d63 vmscan: factor out page reference checks
> > 
> > because the situation was even worse before (see the series
> > description in dfc8d63).  Maybe asking the obvious, but the kernel you
> > tested on did include those commits, right?
> > 
> > And just to be sure, I sent you a test-patch to disable the used-once
> > detection on IRC the other day.  Did you have time to run it yet?
> > Here it is again:
> > 
> > diff --git a/mm/vmscan.c b/mm/vmscan.c
> > index 9c7e57c..c757bba 100644
> > --- a/mm/vmscan.c
> > +++ b/mm/vmscan.c
> > @@ -584,6 +584,7 @@ static enum page_references page_check_references(struct page *page,
> >  		return PAGEREF_RECLAIM;
> >  
> >  	if (referenced_ptes) {
> > +		return PAGEREF_ACTIVATE;
> 
> How come page activation helps?
> 
> >  		if (PageAnon(page))
> >  			return PAGEREF_ACTIVATE;
> >  		/*
> > 
> > 
> > > > In my testing with a 6GB machine and 2.9GHz CPU, one in every
> > > > 15,000 page faults takes over a second, and one in every 40,000
> > > > page faults take over seven seconds!
> > > > 
> > > > This test-case demonstrates a problem that occurs with a read-mostly 
> > > > mmap of a file on very fast media.  I wouldn't like to see a solution
> > > > that special-cases zeroed pages.  I think userspace has done its part
> > > > to tell the kernel what's it's doing by calling madvise(MADV_RANDOM).
> > > > This ought to be enough to hint to the kernel that it should be eagerly
> > > > throwing away pages in this VMA.
> > 
> > We can probably do something like the following, but I am not sure
> > this is a good fix, either.  How many applications are using
> > madvise()?
> 
> Heh, it sounds crazy to rip random read pages, though it does help to
> produce a FAST test case.
> 
> > --- a/mm/rmap.c
> > +++ b/mm/rmap.c
> > @@ -495,7 +495,7 @@ int page_referenced_one(struct page *pag
> >  		 * mapping is already gone, the unmap path will have
> >  		 * set PG_referenced or activated the page.
> >  		 */
> > -		if (likely(!VM_SequentialReadHint(vma)))
> > +		if (likely(!(vma->vm_flags & (VM_SEQ_READ|VM_RAND_READ))))
> >  			referenced++;
> >  	}
> 
> Thanks,
> Fengguang
> 

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2010-08-18 16:08 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-08-09 13:30 [TESTCASE] Clean pages clogging the VM Matthew Wilcox
2010-08-17 19:50 ` Matthew Wilcox
2010-08-18 14:13   ` Johannes Weiner
     [not found]     ` <20100818160613.GE9431@localhost>
2010-08-18 16:07       ` Wu Fengguang [this message]
2010-08-19  1:42         ` Shaohua Li
2010-08-19 11:51         ` Johannes Weiner
2010-08-19 21:09           ` Wu Fengguang
2010-08-20  5:05           ` Shaohua Li
2010-08-18 21:26     ` Wu Fengguang
2010-08-19  9:18     ` KOSAKI Motohiro

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100818160731.GA15002@localhost \
    --to=fengguang.wu@intel.com \
    --cc=hannes@cmpxchg.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=shaohua.li@intel.com \
    --cc=willy@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).