From: Gleb Natapov <gleb@redhat.com>
To: Marcelo Tosatti <mtosatti@redhat.com>
Cc: kvm@vger.kernel.org, linux-mm@kvack.org,
linux-kernel@vger.kernel.org, avi@redhat.com, mingo@elte.hu,
a.p.zijlstra@chello.nl, tglx@linutronix.de, hpa@zytor.com,
riel@redhat.com, cl@linux-foundation.org
Subject: Re: [PATCH v6 02/12] Halt vcpu if page it tries to access is swapped out.
Date: Wed, 6 Oct 2010 13:15:18 +0200 [thread overview]
Message-ID: <20101006111518.GY11145@redhat.com> (raw)
In-Reply-To: <20101005145916.GA28955@amt.cnet>
On Tue, Oct 05, 2010 at 11:59:16AM -0300, Marcelo Tosatti wrote:
> On Mon, Oct 04, 2010 at 05:56:24PM +0200, Gleb Natapov wrote:
> > If a guest accesses swapped out memory do not swap it in from vcpu thread
> > context. Schedule work to do swapping and put vcpu into halted state
> > instead.
> >
> > Interrupts will still be delivered to the guest and if interrupt will
> > cause reschedule guest will continue to run another task.
> >
> > Signed-off-by: Gleb Natapov <gleb@redhat.com>
> > ---
> > arch/x86/include/asm/kvm_host.h | 17 +++
> > arch/x86/kvm/Kconfig | 1 +
> > arch/x86/kvm/Makefile | 1 +
> > arch/x86/kvm/mmu.c | 51 +++++++++-
> > arch/x86/kvm/paging_tmpl.h | 4 +-
> > arch/x86/kvm/x86.c | 109 +++++++++++++++++++-
> > include/linux/kvm_host.h | 31 ++++++
> > include/trace/events/kvm.h | 88 ++++++++++++++++
> > virt/kvm/Kconfig | 3 +
> > virt/kvm/async_pf.c | 220 +++++++++++++++++++++++++++++++++++++++
> > virt/kvm/async_pf.h | 36 +++++++
> > virt/kvm/kvm_main.c | 57 ++++++++--
> > 12 files changed, 603 insertions(+), 15 deletions(-)
> > create mode 100644 virt/kvm/async_pf.c
> > create mode 100644 virt/kvm/async_pf.h
> >
>
> > + async_pf_cache = NULL;
> > +}
> > +
> > +void kvm_async_pf_vcpu_init(struct kvm_vcpu *vcpu)
> > +{
> > + INIT_LIST_HEAD(&vcpu->async_pf.done);
> > + INIT_LIST_HEAD(&vcpu->async_pf.queue);
> > + spin_lock_init(&vcpu->async_pf.lock);
> > +}
> > +
> > +static void async_pf_execute(struct work_struct *work)
> > +{
> > + struct page *page;
> > + struct kvm_async_pf *apf =
> > + container_of(work, struct kvm_async_pf, work);
> > + struct mm_struct *mm = apf->mm;
> > + struct kvm_vcpu *vcpu = apf->vcpu;
> > + unsigned long addr = apf->addr;
> > + gva_t gva = apf->gva;
> > +
> > + might_sleep();
> > +
> > + use_mm(mm);
> > + down_read(&mm->mmap_sem);
> > + get_user_pages(current, mm, addr, 1, 1, 0, &page, NULL);
> > + up_read(&mm->mmap_sem);
> > + unuse_mm(mm);
> > +
> > + spin_lock(&vcpu->async_pf.lock);
> > + list_add_tail(&apf->link, &vcpu->async_pf.done);
> > + apf->page = page;
> > + spin_unlock(&vcpu->async_pf.lock);
>
> This can fail, and apf->page become NULL.
>
> > + if (list_empty_careful(&vcpu->async_pf.done))
> > + return;
> > +
> > + spin_lock(&vcpu->async_pf.lock);
> > + work = list_first_entry(&vcpu->async_pf.done, typeof(*work), link);
> > + list_del(&work->link);
> > + spin_unlock(&vcpu->async_pf.lock);
> > +
> > + kvm_arch_async_page_present(vcpu, work);
> > +
> > +free:
> > + list_del(&work->queue);
> > + vcpu->async_pf.queued--;
> > + put_page(work->page);
> > + kmem_cache_free(async_pf_cache, work);
> > +}
>
> Better handle it here (and other sites).
Yeah. We should just reenter gust and let usual code path handle error
on next guest access.
--
Gleb.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2010-10-06 11:15 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-04 15:56 [PATCH v6 00/12] KVM: Add host swap event notifications for PV guest Gleb Natapov
2010-10-04 15:56 ` [PATCH v6 01/12] Add get_user_pages() variant that fails if major fault is required Gleb Natapov
2010-10-04 15:56 ` [PATCH v6 02/12] Halt vcpu if page it tries to access is swapped out Gleb Natapov
2010-10-05 1:20 ` Rik van Riel
2010-10-05 14:59 ` Marcelo Tosatti
2010-10-06 10:50 ` Avi Kivity
2010-10-06 10:52 ` Gleb Natapov
2010-10-07 9:54 ` Avi Kivity
2010-10-07 17:48 ` Gleb Natapov
2010-10-06 11:15 ` Gleb Natapov [this message]
2010-10-07 9:50 ` Avi Kivity
2010-10-07 9:52 ` Avi Kivity
2010-10-07 13:24 ` Rik van Riel
2010-10-07 13:29 ` Avi Kivity
2010-10-07 17:47 ` Gleb Natapov
2010-10-09 18:30 ` Avi Kivity
2010-10-09 18:32 ` Avi Kivity
2010-10-10 7:30 ` Gleb Natapov
2010-10-10 7:29 ` Gleb Natapov
2010-10-10 15:55 ` Avi Kivity
2010-10-10 15:56 ` Avi Kivity
2010-10-10 16:17 ` Gleb Natapov
2010-10-10 16:16 ` Gleb Natapov
2010-10-04 15:56 ` [PATCH v6 03/12] Retry fault before vmentry Gleb Natapov
2010-10-05 15:54 ` Marcelo Tosatti
2010-10-06 11:07 ` Gleb Natapov
2010-10-06 14:20 ` Marcelo Tosatti
2010-10-07 18:44 ` Gleb Natapov
2010-10-08 16:07 ` Marcelo Tosatti
2010-10-07 12:29 ` Avi Kivity
2010-10-07 17:21 ` Gleb Natapov
2010-10-09 18:42 ` Avi Kivity
2010-10-10 7:35 ` Gleb Natapov
2010-10-04 15:56 ` [PATCH v6 04/12] Add memory slot versioning and use it to provide fast guest write interface Gleb Natapov
2010-10-05 1:29 ` Rik van Riel
2010-10-05 16:57 ` Marcelo Tosatti
2010-10-06 11:14 ` Gleb Natapov
2010-10-06 14:38 ` Marcelo Tosatti
2010-10-06 20:08 ` Gleb Natapov
2010-10-07 10:00 ` Avi Kivity
2010-10-07 15:42 ` Marcelo Tosatti
2010-10-07 16:03 ` Gleb Natapov
2010-10-07 16:20 ` Avi Kivity
2010-10-07 17:23 ` Gleb Natapov
2010-10-10 12:48 ` Avi Kivity
2010-10-07 12:31 ` Avi Kivity
2010-10-04 15:56 ` [PATCH v6 05/12] Move kvm_smp_prepare_boot_cpu() from kvmclock.c to kvm.c Gleb Natapov
2010-10-04 15:56 ` [PATCH v6 06/12] Add PV MSR to enable asynchronous page faults delivery Gleb Natapov
2010-10-07 12:42 ` Avi Kivity
2010-10-07 17:53 ` Gleb Natapov
2010-10-10 12:47 ` Avi Kivity
2010-10-10 13:27 ` Gleb Natapov
2010-10-07 12:58 ` Avi Kivity
2010-10-07 17:59 ` Gleb Natapov
2010-10-09 18:43 ` Avi Kivity
2010-10-04 15:56 ` [PATCH v6 07/12] Add async PF initialization to PV guest Gleb Natapov
2010-10-05 2:34 ` Rik van Riel
2010-10-05 18:25 ` Marcelo Tosatti
2010-10-06 10:55 ` Gleb Natapov
2010-10-06 14:45 ` Marcelo Tosatti
2010-10-06 20:05 ` Gleb Natapov
2010-10-07 12:50 ` Avi Kivity
2010-10-08 7:54 ` Gleb Natapov
2010-10-09 18:44 ` Avi Kivity
2010-10-04 15:56 ` [PATCH v6 08/12] Handle async PF in a guest Gleb Natapov
2010-10-07 13:10 ` Avi Kivity
2010-10-07 17:14 ` Gleb Natapov
2010-10-07 17:18 ` Avi Kivity
2010-10-07 17:48 ` Rik van Riel
2010-10-07 18:03 ` Gleb Natapov
2010-10-09 18:48 ` Avi Kivity
2010-10-10 7:56 ` Gleb Natapov
2010-10-10 12:40 ` Avi Kivity
2010-10-10 12:32 ` Gleb Natapov
2010-10-10 12:38 ` Avi Kivity
2010-10-10 13:22 ` Gleb Natapov
2010-10-04 15:56 ` [PATCH v6 09/12] Inject asynchronous page fault into a PV guest if page is swapped out Gleb Natapov
2010-10-05 2:36 ` Rik van Riel
2010-10-05 19:00 ` Marcelo Tosatti
2010-10-06 10:42 ` Gleb Natapov
2010-10-04 15:56 ` [PATCH v6 10/12] Handle async PF in non preemptable context Gleb Natapov
2010-10-05 19:51 ` Marcelo Tosatti
2010-10-06 10:41 ` Gleb Natapov
2010-10-10 14:25 ` Gleb Natapov
2010-10-04 15:56 ` [PATCH v6 11/12] Let host know whether the guest can handle async PF in non-userspace context Gleb Natapov
2010-10-07 13:36 ` Avi Kivity
2010-10-04 15:56 ` [PATCH v6 12/12] Send async PF when guest is not in userspace too Gleb Natapov
2010-10-05 2:37 ` Rik van Riel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101006111518.GY11145@redhat.com \
--to=gleb@redhat.com \
--cc=a.p.zijlstra@chello.nl \
--cc=avi@redhat.com \
--cc=cl@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mingo@elte.hu \
--cc=mtosatti@redhat.com \
--cc=riel@redhat.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).