From: Dave Hansen <dave@linux.vnet.ibm.com>
To: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org, Michael J Wolf <mjwolf@us.ibm.com>,
Andrea Arcangeli <aarcange@redhat.com>,
Dave Hansen <dave@linux.vnet.ibm.com>
Subject: [PATCH 1/5] pagewalk: only split huge pages when necessary
Date: Wed, 09 Feb 2011 11:54:07 -0800 [thread overview]
Message-ID: <20110209195407.2CE28EA0@kernel> (raw)
In-Reply-To: <20110209195406.B9F23C9F@kernel>
v2 - rework if() block, and remove now redundant split_huge_page()
Right now, if a mm_walk has either ->pte_entry or ->pmd_entry
set, it will unconditionally split any transparent huge pages
it runs in to. In practice, that means that anyone doing a
cat /proc/$pid/smaps
will unconditionally break down every huge page in the process
and depend on khugepaged to re-collapse it later. This is
fairly suboptimal.
This patch changes that behavior. It teaches each ->pmd_entry
handler (there are five) that they must break down the THPs
themselves. Also, the _generic_ code will never break down
a THP unless a ->pte_entry handler is actually set.
This means that the ->pmd_entry handlers can now choose to
deal with THPs without breaking them down.
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
---
linux-2.6.git-dave/fs/proc/task_mmu.c | 6 ++++++
linux-2.6.git-dave/include/linux/mm.h | 3 +++
linux-2.6.git-dave/mm/memcontrol.c | 5 +++--
linux-2.6.git-dave/mm/pagewalk.c | 24 ++++++++++++++++++++----
4 files changed, 32 insertions(+), 6 deletions(-)
diff -puN fs/proc/task_mmu.c~pagewalk-dont-always-split-thp fs/proc/task_mmu.c
--- linux-2.6.git/fs/proc/task_mmu.c~pagewalk-dont-always-split-thp 2011-02-09 11:41:42.299558364 -0800
+++ linux-2.6.git-dave/fs/proc/task_mmu.c 2011-02-09 11:41:42.319558349 -0800
@@ -343,6 +343,8 @@ static int smaps_pte_range(pmd_t *pmd, u
struct page *page;
int mapcount;
+ split_huge_page_pmd(walk->mm, pmd);
+
pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
for (; addr != end; pte++, addr += PAGE_SIZE) {
ptent = *pte;
@@ -467,6 +469,8 @@ static int clear_refs_pte_range(pmd_t *p
spinlock_t *ptl;
struct page *page;
+ split_huge_page_pmd(walk->mm, pmd);
+
pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
for (; addr != end; pte++, addr += PAGE_SIZE) {
ptent = *pte;
@@ -623,6 +627,8 @@ static int pagemap_pte_range(pmd_t *pmd,
pte_t *pte;
int err = 0;
+ split_huge_page_pmd(walk->mm, pmd);
+
/* find the first VMA at or above 'addr' */
vma = find_vma(walk->mm, addr);
for (; addr != end; addr += PAGE_SIZE) {
diff -puN include/linux/mm.h~pagewalk-dont-always-split-thp include/linux/mm.h
--- linux-2.6.git/include/linux/mm.h~pagewalk-dont-always-split-thp 2011-02-09 11:41:42.303558361 -0800
+++ linux-2.6.git-dave/include/linux/mm.h 2011-02-09 11:41:42.323558346 -0800
@@ -899,6 +899,9 @@ unsigned long unmap_vmas(struct mmu_gath
* @pgd_entry: if set, called for each non-empty PGD (top-level) entry
* @pud_entry: if set, called for each non-empty PUD (2nd-level) entry
* @pmd_entry: if set, called for each non-empty PMD (3rd-level) entry
+ * this handler is required to be able to handle
+ * pmd_trans_huge() pmds. They may simply choose to
+ * split_huge_page() instead of handling it explicitly.
* @pte_entry: if set, called for each non-empty PTE (4th-level) entry
* @pte_hole: if set, called for each hole at all levels
* @hugetlb_entry: if set, called for each hugetlb entry
diff -puN mm/memcontrol.c~pagewalk-dont-always-split-thp mm/memcontrol.c
--- linux-2.6.git/mm/memcontrol.c~pagewalk-dont-always-split-thp 2011-02-09 11:41:42.311558355 -0800
+++ linux-2.6.git-dave/mm/memcontrol.c 2011-02-09 11:41:42.327558343 -0800
@@ -4737,7 +4737,8 @@ static int mem_cgroup_count_precharge_pt
pte_t *pte;
spinlock_t *ptl;
- VM_BUG_ON(pmd_trans_huge(*pmd));
+ split_huge_page_pmd(walk->mm, pmd);
+
pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
for (; addr != end; pte++, addr += PAGE_SIZE)
if (is_target_pte_for_mc(vma, addr, *pte, NULL))
@@ -4899,8 +4900,8 @@ static int mem_cgroup_move_charge_pte_ra
pte_t *pte;
spinlock_t *ptl;
+ split_huge_page_pmd(walk->mm, pmd);
retry:
- VM_BUG_ON(pmd_trans_huge(*pmd));
pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
for (; addr != end; addr += PAGE_SIZE) {
pte_t ptent = *(pte++);
diff -puN mm/pagewalk.c~pagewalk-dont-always-split-thp mm/pagewalk.c
--- linux-2.6.git/mm/pagewalk.c~pagewalk-dont-always-split-thp 2011-02-09 11:41:42.315558352 -0800
+++ linux-2.6.git-dave/mm/pagewalk.c 2011-02-09 11:41:42.331558340 -0800
@@ -33,19 +33,35 @@ static int walk_pmd_range(pud_t *pud, un
pmd = pmd_offset(pud, addr);
do {
+ again:
next = pmd_addr_end(addr, end);
- split_huge_page_pmd(walk->mm, pmd);
- if (pmd_none_or_clear_bad(pmd)) {
+ if (pmd_none(*pmd)) {
if (walk->pte_hole)
err = walk->pte_hole(addr, next, walk);
if (err)
break;
continue;
}
+ /*
+ * This implies that each ->pmd_entry() handler
+ * needs to know about pmd_trans_huge() pmds
+ */
if (walk->pmd_entry)
err = walk->pmd_entry(pmd, addr, next, walk);
- if (!err && walk->pte_entry)
- err = walk_pte_range(pmd, addr, next, walk);
+ if (err)
+ break;
+
+ /*
+ * Check this here so we only break down trans_huge
+ * pages when we _need_ to
+ */
+ if (!walk->pte_entry)
+ continue;
+
+ split_huge_page_pmd(walk->mm, pmd);
+ if (pmd_none_or_clear_bad(pmd))
+ goto again;
+ err = walk_pte_range(pmd, addr, next, walk);
if (err)
break;
} while (pmd++, addr = next, addr != end);
_
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2011-02-09 19:54 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-09 19:54 [PATCH 0/5] fix up /proc/$pid/smaps to not split huge pages Dave Hansen
2011-02-09 19:54 ` Dave Hansen [this message]
2011-02-10 11:11 ` [PATCH 1/5] pagewalk: only split huge pages when necessary Mel Gorman
2011-02-10 13:19 ` Andrea Arcangeli
2011-02-10 13:34 ` Mel Gorman
2011-02-09 19:54 ` [PATCH 2/5] break out smaps_pte_entry() from smaps_pte_range() Dave Hansen
2011-02-10 11:15 ` Mel Gorman
2011-02-09 19:54 ` [PATCH 3/5] pass pte size argument in to smaps_pte_entry() Dave Hansen
2011-02-10 11:16 ` Mel Gorman
2011-02-09 19:54 ` [PATCH 4/5] teach smaps_pte_range() about THP pmds Dave Hansen
2011-02-10 11:17 ` Mel Gorman
2011-02-10 18:08 ` Andrea Arcangeli
2011-02-10 19:32 ` Dave Hansen
2011-02-09 19:54 ` [PATCH 5/5] have smaps show transparent huge pages Dave Hansen
2011-02-10 11:20 ` Mel Gorman
2011-02-10 15:01 ` Dave Hansen
2011-02-10 15:09 ` Mel Gorman
2011-02-10 18:09 ` Andrea Arcangeli
2011-02-10 18:20 ` Dave Hansen
2011-02-10 18:39 ` Andrea Arcangeli
2011-02-09 21:24 ` [PATCH 0/5] fix up /proc/$pid/smaps to not split " Andrea Arcangeli
2011-02-20 21:54 ` David Rientjes
2011-02-15 16:55 ` Eric B Munson
2011-02-15 17:01 ` Andrea Arcangeli
2011-02-15 17:05 ` Dave Hansen
2011-02-15 18:00 ` Andrea Arcangeli
-- strict thread matches above, loose matches on Subject: below --
2011-02-22 1:53 Dave Hansen
2011-02-22 1:53 ` [PATCH 1/5] pagewalk: only split huge pages when necessary Dave Hansen
2011-02-22 21:21 ` David Rientjes
2011-02-23 15:30 ` Eric B Munson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110209195407.2CE28EA0@kernel \
--to=dave@linux.vnet.ibm.com \
--cc=aarcange@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mjwolf@us.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).