From: Mel Gorman <mel@csn.ul.ie>
To: Shaohua Li <shaohua.li@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>,
Andrew Morton <akpm@linux-foundation.org>,
linux-mm <linux-mm@kvack.org>,
"Chen, Tim C" <tim.c.chen@intel.com>,
Rik van Riel <riel@redhat.com>,
alex.shi@intel.com
Subject: Re: too big min_free_kbytes
Date: Tue, 22 Feb 2011 14:25:59 +0000 [thread overview]
Message-ID: <20110222142559.GD15652@csn.ul.ie> (raw)
In-Reply-To: <20110214022524.GA18198@sli10-conroe.sh.intel.com>
On Mon, Feb 14, 2011 at 10:25:24AM +0800, Shaohua Li wrote:
> On Thu, Feb 03, 2011 at 10:58:08AM +0800, Andrea Arcangeli wrote:
> > On Thu, Jan 27, 2011 at 04:27:55PM +0100, Andrea Arcangeli wrote:
> > > totally untested... I will test....
> >
> > The below patch is fixing my problem and working fine for me... as
> > expected it can't possibly lead to any D state, it's pretty much like
> > setting min_free_kbytes lower, and it's not going to alter anything
> > other than the levels of free memory kept by kswapd.
> >
> > $ while :; do ps xa|grep [k]swapd; sleep 1; done
> > 452 ? R 1:20 [kswapd0]
> > 452 ? S 1:20 [kswapd0]
> > 452 ? S 1:20 [kswapd0]
> > 452 ? S 1:20 [kswapd0]
> > 452 ? S 1:20 [kswapd0]
> > 452 ? R 1:20 [kswapd0]
> > 452 ? R 1:20 [kswapd0]
> > 452 ? R 1:20 [kswapd0]
> > 452 ? R 1:20 [kswapd0]
> > 452 ? S 1:20 [kswapd0]
> > 452 ? R 1:20 [kswapd0]
> > $ vmstat 1
> > procs -----------memory---------- ---swap-- -----io---- -system--
> > ----cpu----
> > r b swpd free buff cache si so bi bo in cs us
> > sy id wa
> > 2 1 1784 111040 2393336 807924 0 0 63 992 56 70 1 1 96 2
> > 0 1 1784 108928 2402556 801864 0 0 122624 0 1619 2150 0 5 80 16
> > 0 1 1784 110664 2401244 801140 0 0 122496 0 1602 2081 0 3 81 16
> > 0 1 1784 109796 2410184 792984 0 0 122752 0 1685 2149 0 4 80 16
> > 0 1 1784 110416 2411856 791208 0 0 120448 4 1599 2075 0 4 81 16
> > 1 0 1784 113516 2415344 785336 0 0 122496 0 1636 2125 0 4 81 15
> >
> > I doubt we'll get any regression because of the below (see also my
> > prev email in this thread), and I would only expect more cache and
> > maybe better lru. Previously the free memory levels were stuck at
> > ~700M now they're stuck at the right level for a 4G system with THP on
> > (I'd still like to try to reduce the requirements only 1 hugepage for
> > each migratetype in the set_min_free_kbytes to reduce the requirements
> > to the minium, but only if possible..). But this saves 600M over 4G so
> > it's the highest prio to address.
> Sorry for the later response, I offlined several weeks.
> The patch is addressing the 8*high_wmark issue, which isn't the original issue
> I reported (sure the 8*wmark issue should be fixed too).
> min_free_kbytes is set higher and cause more pages freed even no the 8*wmark
> issue. wmark:
> before: min 1424
> after: min 11178
The higher min_free_kbytes is expected as a result of using transparent
hugepages so I don't really consider it a bug. Free memory going up to
about 700M as a result of kswapd is a real bug though.
> in our test, there is about 50M memory free (originally just about 5M, which
> will cause more swap. Should we also reduce the min_free_kbytes?
>
Either that or boot with transparent hugepages disabled and
min_free_kbytes will be lower.
--
Mel Gorman
SUSE Labs
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2011-02-22 14:26 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-24 3:56 too big min_free_kbytes Shaohua Li
2011-01-24 15:00 ` Andrea Arcangeli
2011-01-25 14:35 ` Mel Gorman
2011-01-26 14:17 ` Mel Gorman
2011-01-26 15:23 ` Mel Gorman
2011-01-26 15:42 ` Andrea Arcangeli
2011-01-26 16:36 ` Mel Gorman
2011-01-26 17:42 ` Mel Gorman
2011-01-27 13:40 ` Mel Gorman
2011-01-27 15:27 ` Andrea Arcangeli
2011-01-27 16:03 ` Mel Gorman
2011-01-27 18:52 ` Andrea Arcangeli
2011-01-27 20:33 ` Rik van Riel
2011-01-27 21:31 ` Mel Gorman
2011-01-27 23:18 ` Rik van Riel
2011-01-28 10:35 ` Mel Gorman
2011-01-28 16:28 ` Andrea Arcangeli
2011-01-28 16:46 ` Mel Gorman
2011-01-28 17:16 ` Rik van Riel
2011-01-28 17:46 ` Andrea Arcangeli
2011-01-28 18:03 ` Rik van Riel
2011-01-28 18:24 ` Andrea Arcangeli
2011-01-28 19:34 ` Rik van Riel
2011-01-28 19:45 ` Andrea Arcangeli
2011-01-28 20:55 ` Rik van Riel
2011-01-29 19:45 ` Andrea Arcangeli
2011-01-28 17:34 ` Andrea Arcangeli
2011-01-28 17:10 ` Rik van Riel
2011-02-03 2:58 ` Andrea Arcangeli
2011-02-03 13:15 ` Mel Gorman
2011-02-03 18:59 ` Andrea Arcangeli
2011-02-03 14:36 ` Rik van Riel
2011-02-03 19:11 ` Andrea Arcangeli
2011-02-12 1:28 ` Simon Kirby
2011-02-14 2:25 ` Shaohua Li
2011-02-22 14:25 ` Mel Gorman [this message]
2011-02-22 14:42 ` Andrea Arcangeli
2011-02-22 14:50 ` Mel Gorman
2011-02-22 14:54 ` Andrea Arcangeli
2011-02-22 16:04 ` Mel Gorman
2011-02-22 16:40 ` Rik van Riel
2011-02-23 5:29 ` Shaohua Li
2011-02-23 14:45 ` Andrea Arcangeli
2011-02-24 8:08 ` Shaohua Li
2011-02-24 9:52 ` Mel Gorman
2011-02-24 9:57 ` Mel Gorman
2011-02-24 14:27 ` Andrea Arcangeli
2011-02-24 14:04 ` Andrea Arcangeli
2011-02-25 0:51 ` Shaohua Li
2011-02-25 12:13 ` Mel Gorman
2011-02-12 9:48 ` alex shi
2011-02-22 14:24 ` Mel Gorman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110222142559.GD15652@csn.ul.ie \
--to=mel@csn.ul.ie \
--cc=aarcange@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=alex.shi@intel.com \
--cc=linux-mm@kvack.org \
--cc=riel@redhat.com \
--cc=shaohua.li@intel.com \
--cc=tim.c.chen@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).