From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
To: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michel Lespinasse <walken@google.com>,
Minchan Kim <minchan.kim@gmail.com>,
Hugh Dickins <hughd@google.com>,
linux-mm@kvack.org, Andrew Morton <akpm@linux-foundation.org>,
Rik van Riel <riel@redhat.com>, Mel Gorman <mgorman@suse.de>,
Johannes Weiner <jweiner@redhat.com>,
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>,
Shaohua Li <shaohua.li@intel.com>
Subject: SPAM: Re: [RFC PATCH 0/3] page count lock for simpler put_page
Date: Fri, 12 Aug 2011 09:08:13 -0700 [thread overview]
Message-ID: <20110812160813.GF2395@linux.vnet.ibm.com> (raw)
In-Reply-To: <20110812153616.GH7959@redhat.com>
On Fri, Aug 12, 2011 at 05:36:16PM +0200, Andrea Arcangeli wrote:
> On Tue, Aug 09, 2011 at 04:04:21AM -0700, Michel Lespinasse wrote:
> > - Use my proposed page count lock in order to avoid the race. One
> > would have to convert all get_page_unless_zero() sites to use it. I
> > expect the cost would be low but still measurable.
>
> I didn't yet focus at your problem after we talked about it at MM
> summit, but I seem to recall I suggested there to just get to the head
> page and always take the lock on it. split_huge_page only works at 2M
> aligned pages, the rest you don't care about. Getting to the head page
> compound_lock should be always safe. And that will still scale
> incredibly better than taking the lru_lock for the whole zone (which
> would also work). And it seems the best way to stop split_huge_page
> without having to alter the put_page fast path when it works on head
> pages (the only thing that gets into put_page complex slow path is the
> release of tail pages after get_user_pages* so it'd be nice if
> put_page fast path still didn't need to take locks).
>
> > - It'd be sweet if one could somehow record the time a THP page was
> > created, and wait for at least one RCU grace period *starting from the
> > recorded THP creation time* before splitting huge pages. In practice,
> > we would be very unlikely to have to wait since the grace period would
> > be already expired. However, I don't think RCU currently provides such
> > a mechanism - Paul, is this something that would seem easy to
> > implement or not ?
It should not be hard. I already have an API for rcutorture testing
use, but it is not appropriate for your use because it is unsynchronized.
We need to be careful with what I give you and how you interpret it.
The most effective approach would be for me to give you an API that
filled in a cookie given a pointer to one, then another API that took
pointers to a pair of cookies and returned saying whether or not a
grace period had elapsed. You would do something like the following:
rcu_get_gp_cookie(&pagep->rcucookie);
. . .
rcu_get_gp_cookie(&autovarcookie);
if (!rcu_cookie_gp_elapsed(&pagep->rcucookie, &autovarcookie))
synchronize_rcu();
So, how much space do I get for ->rcucookie? By default, it is a pair
of unsigned longs, but I could live with as small as a single byte if
you didn't mind a high probability of false negatives (me telling you
to do a grace period despite 16 of them having happened in the meantime
due to overflow of a 4-bit field in the byte).
That covers TREE_RCU and TREE_PREEMPT_RCU, on to TINY_RCU and TINY_PREEMPT_RCU.
TINY_RCU will require more thought, as it doesn't bother counting grace
periods. Ah, but in TINY_RCU, synchronize_rcu() is free, so I simply
make rcu_cookie_gp_elapsed() always return false.
OK, TINY_PREEMPT_RCU... It doesn't count grace periods, either. But it
is able to reliably detect if there are any RCU readers in flight,
and there normally won't be, so synchronize_rcu() is again free in the
common case. And no, I don't want to count grace periods as this would
increase the memory footprint. And the whole point of TINY_PREEMPT_RCU
is to be tiny, after all. ;-)
If you need SRCU, you are out of luck until I get my act together and
merge it in with the other RCU implementations, which might be awhile
still.
For TREE_*RCU, the calls to rcu_get_gp_cookie() will cost you a lock
round trip. I am hoping to be able to use the counters stored in the
rcu_data structure, which means that I would need to disable preemption
and re-enable it. Or maybe disable and re-enable irqs instead, not yet
sure which. This might require me to be conservative and make
rcu_cookie_gp_elapsed() unless two grace periods have elapsed. Things
get a bit tricky -- yes, I could just use the global counters, but that
would mean that rcu_get_gp_cookie() would need to acquire a global lock,
and I suspect that you intend to invoke it too often for that to be
a winning strategy.
Thoughts? And how many bits do I get for the cookie?
Thanx, Paul
> This looks sweet. We could store a quiescent points generation counter
> in the page[1].something, if the page has the same generation of the
> last RCU quiescent point (vs rcu_read_lock) we synchronize_rcu before
> starting split_huge_page. split_huge_page is serialized through the
> anon_vma lock however, so we'd need to release the anon_vma lock,
> synchronize_rcu and retry and this time the page[1].something sequence
> counter would be older than the rcu generation counter and it'll
> proceed (maybe another thread or process will get there first but
> that's ok).
>
> I didn't have better ideas than yours above, but I'll keep thinking.
>
> > > When I make deactivate_page, I didn't consider that honestly.
> > > IMHO, It shouldn't be a problem as deactive_page hold a reference
> > > of page by pagevec_lookup so the page shouldn't be gone under us.
> >
> > Agree - it seems like you are guaranteed to already hold a reference
> > (but then a straight get_page should be sufficient, right ?)
>
> I hope this is not an issue because of the fact the page is guaranteed
> not to be THP when get_page_unless_zero runs on it.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2011-08-12 16:08 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-04 21:07 [RFC PATCH 0/3] page count lock for simpler put_page Michel Lespinasse
2011-08-04 21:07 ` [RFC PATCH 1/3] mm: Replace naked page->_count accesses with accessor functions Michel Lespinasse
2011-08-04 21:07 ` [RFC PATCH 2/3] mm: page count lock Michel Lespinasse
2011-08-07 14:00 ` Minchan Kim
2011-08-04 21:07 ` [RFC PATCH 3/3] mm: get_first_page_unless_zero() Michel Lespinasse
2011-08-07 14:13 ` Minchan Kim
2011-08-05 6:39 ` [RFC PATCH 0/3] page count lock for simpler put_page Michel Lespinasse
2011-08-07 14:25 ` Minchan Kim
2011-08-09 11:04 ` Michel Lespinasse
2011-08-09 22:22 ` Minchan Kim
2011-08-12 22:35 ` Michel Lespinasse
2011-08-13 4:07 ` Minchan Kim
2011-08-12 15:36 ` Andrea Arcangeli
2011-08-12 16:08 ` Paul E. McKenney [this message]
2011-08-12 16:43 ` Andrea Arcangeli
2011-08-12 17:27 ` Paul E. McKenney
2011-08-12 23:45 ` Michel Lespinasse
2011-08-13 1:57 ` Paul E. McKenney
2011-08-13 23:56 ` Andrea Arcangeli
2011-08-13 4:18 ` Minchan Kim
2011-08-12 16:57 ` Johannes Weiner
2011-08-12 17:08 ` Andrea Arcangeli
2011-08-12 17:52 ` Johannes Weiner
2011-08-12 18:13 ` Paul E. McKenney
2011-08-12 19:05 ` Johannes Weiner
2011-08-12 22:14 ` Paul E. McKenney
2011-08-12 22:22 ` Andrea Arcangeli
2011-08-12 18:03 ` Paul E. McKenney
2011-08-12 17:41 ` Paul E. McKenney
2011-08-12 17:56 ` Johannes Weiner
2011-08-12 23:02 ` Michel Lespinasse
2011-08-12 22:50 ` Michel Lespinasse
2011-08-13 4:11 ` Minchan Kim
2011-08-12 16:58 ` Andrea Arcangeli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110812160813.GF2395@linux.vnet.ibm.com \
--to=paulmck@linux.vnet.ibm.com \
--cc=aarcange@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=hughd@google.com \
--cc=jweiner@redhat.com \
--cc=kosaki.motohiro@jp.fujitsu.com \
--cc=linux-mm@kvack.org \
--cc=mgorman@suse.de \
--cc=minchan.kim@gmail.com \
--cc=riel@redhat.com \
--cc=shaohua.li@intel.com \
--cc=walken@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).