[PATCH 1/1] page_alloc.c: remove argument to pageblock_default_order

[PATCH 1/1] page_alloc.c: remove argument to pageblock_default_order

[rajman mekaco]

When CONFIG_HUGETLB_PAGE_SIZE_VARIABLE is not defined, then
pageblock_default_order has an argument to it.

However, free_area_init_core will call it without any argument
anyway.

Remove the argument to pageblock_default_order when
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE is not defined.

Signed-off-by: rajman mekaco <rajman.mekaco@gmail.com>
---
 mm/page_alloc.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index a712fb9..4b95412 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4274,7 +4274,7 @@ static inline void __init set_pageblock_order(unsigned int order)
  * at compile-time. See include/linux/pageblock-flags.h for the values of
  * pageblock_order based on the kernel config
  */
-static inline int pageblock_default_order(unsigned int order)
+static inline int pageblock_default_order(void)
 {
 	return MAX_ORDER-1;
 }
-- 
1.7.5.4

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH 1/1] page_alloc.c: remove argument to pageblock_default_order

[Andrew Morton]

On Thu,  3 May 2012 22:45:12 +0530
rajman mekaco <rajman.mekaco@gmail.com> wrote:

> When CONFIG_HUGETLB_PAGE_SIZE_VARIABLE is not defined, then
> pageblock_default_order has an argument to it.
> 
> However, free_area_init_core will call it without any argument
> anyway.
> 
> Remove the argument to pageblock_default_order when
> CONFIG_HUGETLB_PAGE_SIZE_VARIABLE is not defined.
> 
> Signed-off-by: rajman mekaco <rajman.mekaco@gmail.com>
> ---
>  mm/page_alloc.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> index a712fb9..4b95412 100644
> --- a/mm/page_alloc.c
> +++ b/mm/page_alloc.c
> @@ -4274,7 +4274,7 @@ static inline void __init set_pageblock_order(unsigned int order)
>   * at compile-time. See include/linux/pageblock-flags.h for the values of
>   * pageblock_order based on the kernel config
>   */
> -static inline int pageblock_default_order(unsigned int order)
> +static inline int pageblock_default_order(void)
>  {
>  	return MAX_ORDER-1;
>  }

Interesting.  It has been that way since at least 3.1.

It didn't break the build because pageblock_default_order() is only
ever invoked by set_pageblock_order(), with:

	set_pageblock_order(pageblock_default_order());

and set_pageblock_order() is a macro:

#define set_pageblock_order(x)	do {} while (0)


There's yet another reason not to use macros, dammit - they hide bugs.


Mel, can you have a think about this please?  Can we just kill off
pageblock_default_order() and fold its guts into
set_pageblock_order(void)?  Only ia64 and powerpc can define
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE.

--- a/mm/page_alloc.c~a
+++ a/mm/page_alloc.c
@@ -4300,25 +4300,24 @@ static inline void setup_usemap(struct p
 
 #ifdef CONFIG_HUGETLB_PAGE_SIZE_VARIABLE
 
-/* Return a sensible default order for the pageblock size. */
-static inline int pageblock_default_order(void)
-{
-	if (HPAGE_SHIFT > PAGE_SHIFT)
-		return HUGETLB_PAGE_ORDER;
-
-	return MAX_ORDER-1;
-}
-
 /* Initialise the number of pages represented by NR_PAGEBLOCK_BITS */
-static inline void __init set_pageblock_order(unsigned int order)
+static inline void __init set_pageblock_order(void)
 {
+	unsigned int order;
+
 	/* Check that pageblock_nr_pages has not already been setup */
 	if (pageblock_order)
 		return;
 
+	if (HPAGE_SHIFT > PAGE_SHIFT)
+		order = HUGETLB_PAGE_ORDER;
+	else
+		order = MAX_ORDER - 1;
+
 	/*
 	 * Assume the largest contiguous order of interest is a huge page.
-	 * This value may be variable depending on boot parameters on IA64
+	 * This value may be variable depending on boot parameters on IA64 and
+	 * powerpc.
 	 */
 	pageblock_order = order;
 }
@@ -4326,15 +4325,13 @@ static inline void __init set_pageblock_
 
 /*
  * When CONFIG_HUGETLB_PAGE_SIZE_VARIABLE is not set, set_pageblock_order()
- * and pageblock_default_order() are unused as pageblock_order is set
- * at compile-time. See include/linux/pageblock-flags.h for the values of
- * pageblock_order based on the kernel config
+ * is unused as pageblock_order is set at compile-time. See
+ * include/linux/pageblock-flags.h for the values of pageblock_order based on
+ * the kernel config
  */
-static inline int pageblock_default_order(unsigned int order)
+static inline void set_pageblock_order(void)
 {
-	return MAX_ORDER-1;
 }
-#define set_pageblock_order(x)	do {} while (0)
 
 #endif /* CONFIG_HUGETLB_PAGE_SIZE_VARIABLE */
 
@@ -4422,7 +4419,7 @@ static void __paginginit free_area_init_
 		if (!size)
 			continue;
 
-		set_pageblock_order(pageblock_default_order());
+		set_pageblock_order();
 		setup_usemap(pgdat, zone, size);
 		ret = init_currently_empty_zone(zone, zone_start_pfn,
 						size, MEMMAP_EARLY);
_


--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH 1/1] page_alloc.c: remove argument to pageblock_default_order

[Mel Gorman]

On Thu, May 03, 2012 at 04:37:49PM -0700, Andrew Morton wrote:
> On Thu,  3 May 2012 22:45:12 +0530
> rajman mekaco <rajman.mekaco@gmail.com> wrote:
> 
> > When CONFIG_HUGETLB_PAGE_SIZE_VARIABLE is not defined, then
> > pageblock_default_order has an argument to it.
> > 
> > However, free_area_init_core will call it without any argument
> > anyway.
> > 
> > Remove the argument to pageblock_default_order when
> > CONFIG_HUGETLB_PAGE_SIZE_VARIABLE is not defined.
> > 
> > Signed-off-by: rajman mekaco <rajman.mekaco@gmail.com>
> > ---
> >  mm/page_alloc.c |    2 +-
> >  1 files changed, 1 insertions(+), 1 deletions(-)
> > 
> > diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> > index a712fb9..4b95412 100644
> > --- a/mm/page_alloc.c
> > +++ b/mm/page_alloc.c
> > @@ -4274,7 +4274,7 @@ static inline void __init set_pageblock_order(unsigned int order)
> >   * at compile-time. See include/linux/pageblock-flags.h for the values of
> >   * pageblock_order based on the kernel config
> >   */
> > -static inline int pageblock_default_order(unsigned int order)
> > +static inline int pageblock_default_order(void)
> >  {
> >  	return MAX_ORDER-1;
> >  }
> 
> Interesting.  It has been that way since at least 3.1.
> 

/me slaps self

> It didn't break the build because pageblock_default_order() is only
> ever invoked by set_pageblock_order(), with:
> 
> 	set_pageblock_order(pageblock_default_order());
> 
> and set_pageblock_order() is a macro:
> 
> #define set_pageblock_order(x)	do {} while (0)
> 
> There's yet another reason not to use macros, dammit - they hide bugs.
> 
> 
> Mel, can you have a think about this please?  Can we just kill off
> pageblock_default_order() and fold its guts into
> set_pageblock_order(void)?  Only ia64 and powerpc can define
> CONFIG_HUGETLB_PAGE_SIZE_VARIABLE.
> 

This looks reasonable to me.

-- 
Mel Gorman
SUSE Labs

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>