linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Minchan Kim <minchan@kernel.org>
To: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan@kernel.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	linux-kernel@vger.kernel.org, linux-mm@kvack.org,
	Rik van Riel <riel@redhat.com>,
	KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>,
	Johannes Weiner <hannes@cmpxchg.org>,
	Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Subject: Re: [PATCH] mm: Warn about costly page allocation
Date: Mon, 9 Jul 2012 21:50:48 +0900	[thread overview]
Message-ID: <20120709125048.GA2203@barrios> (raw)
In-Reply-To: <20120709091203.GY14154@suse.de>

On Mon, Jul 09, 2012 at 10:12:03AM +0100, Mel Gorman wrote:
> On Mon, Jul 09, 2012 at 05:46:57PM +0900, Minchan Kim wrote:
> > > > <SNIP>
> > > > +#if defined(CONFIG_DEBUG_VM) && !defined(CONFIG_COMPACTION)
> > > > +static inline void check_page_alloc_costly_order(unsigned int order)
> > > > +{
> > > > +	if (unlikely(order > PAGE_ALLOC_COSTLY_ORDER)) {
> > > > +		printk_once("WARNING: You are tring to allocate %d-order page."
> > > > +		" You might need to turn on CONFIG_COMPACTION\n", order);
> > > > +	}
> > > 
> > > WARN_ON_ONCE would tell you what is trying to satisfy the allocation.
> > 
> > Do you mean that it would be better to use WARN_ON_ONCE rather than raw printk?
> 
> Yes.
> 
> > If so, I would like to insist raw printk because WARN_ON_ONCE could be disabled
> > by !CONFIG_BUG.
> > If I miss something, could you elaborate it more?
> > 
> 
> Ok, but all this will tell you is that *something* tried a high-order
> allocation. It will not tell you who and because it's a printk_once, it
> will also not tell you how often it's happening. You could add a
> dump_stack to capture that information.

That's a good idea.

> 
> > > 
> > > It should further check if this is a GFP_MOVABLE allocation or not and if
> > > not, then it should either be documented that compaction may only delay
> > > allocation failures and that they may need to consider reserving the memory
> > > in advance or doing something like forcing MIGRATE_RESERVE to only be used
> > > for high-order allocations.
> > 
> > Okay. but I got confused you want to add above description in code directly
> > like below or write it down in comment of check_page_alloc_costly_order?
> > 
> 
> You're aiming this at embedded QA people according to your changelog so
> do whatever you think is going to be the most effective. It's already
> "known" that high-order kernel allocations are meant to be unreliable and
> apparently this is being ignored. The in-code warning could look
> something like
> 
> if (unlikely(order > PAGE_ALLOC_COSTLY_ORDER)) {
> 	printk_once("%s: page allocation high-order stupidity: order:%d, mode:0x%x\n",
>                    current->comm, order, gfp_mask);
> 	if (gfp_flags & __GFP_MOVABLE) {
> 		printk_once("Enable compaction or whatever\n");
> 		dump_stack();
> 	} else {
> 		printk_once("Regular high-order kernel allocations like this will eventually start failing.");
> 		dump_stack();
> 	}
> }

I'm not sure we have to check further for __GFP_MOVABLE because I have not seen driver
uses __GFP_MOVABLE for high order allocation. Although it uses the flag, it's never
compactable since it's out of LRU list. So I think it's rather overkill.

> 
> There should be a comment above it giving more information if you think
> the embedded people will actually read it. Of course, if this warning
> triggers during driver initialisation then it might be a completely useless.
> You could rate limit the warning (printk_ratelimit()) instead to be more
> effective. As I don't know what sort of device drivers you are seeing this
> problem with I can't judge what the best style of warning would be.

Okay.
I will send patch like below tomorrow if there isn't any objection.

if (unlikely(order > PAGE_ALLOC_COSTLY_ORDER)) {
	if (printk_ratelimit()) {
		printk("%s: page allocation high-order stupidity: order:%d, mode:0x%x\n",
			current->comm, order, gfp_mask);
		printk_once("Enable compaction or whatever\n");
		printk_once("Regular high-order kernel allocations like this will eventually start failing.\n");
		dump_stack();
	}
}

> 
> -- 
> Mel Gorman
> SUSE Labs

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  reply	other threads:[~2012-07-09 12:50 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-09  2:38 [PATCH] mm: Warn about costly page allocation Minchan Kim
2012-07-09  8:22 ` Mel Gorman
2012-07-09  8:46   ` Minchan Kim
2012-07-09  9:12     ` Mel Gorman
2012-07-09 12:50       ` Minchan Kim [this message]
2012-07-09 13:05         ` Mel Gorman
2012-07-09 13:19           ` Minchan Kim
2012-07-09 20:53             ` Andrew Morton
2012-07-09 12:53     ` Cong Wang
2012-07-09 14:12       ` Minchan Kim
2012-07-11  2:45         ` Cong Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120709125048.GA2203@barrios \
    --to=minchan@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=hannes@cmpxchg.org \
    --cc=kamezawa.hiroyu@jp.fujitsu.com \
    --cc=kosaki.motohiro@jp.fujitsu.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mgorman@suse.de \
    --cc=riel@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).