From: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
To: akpm@linux-foundation.org, mgorman@suse.de, mjg59@srcf.ucam.org,
paulmck@linux.vnet.ibm.com, dave@linux.vnet.ibm.com,
maxime.coquelin@stericsson.com, loic.pallardy@stericsson.com,
arjan@linux.intel.com, kmpark@infradead.org,
kamezawa.hiroyu@jp.fujitsu.com, lenb@kernel.org, rjw@sisk.pl
Cc: gargankita@gmail.com, amit.kachhap@linaro.org,
svaidy@linux.vnet.ibm.com, thomas.abraham@linaro.org,
santosh.shilimkar@ti.com, srivatsa.bhat@linux.vnet.ibm.com,
linux-pm@vger.kernel.org, linux-mm@kvack.org,
linux-kernel@vger.kernel.org
Subject: [RFC PATCH 05/10] mm: Create zonelists
Date: Wed, 07 Nov 2012 01:10:56 +0530 [thread overview]
Message-ID: <20121106194052.6560.36457.stgit@srivatsabhat.in.ibm.com> (raw)
In-Reply-To: <20121106193650.6560.71366.stgit@srivatsabhat.in.ibm.com>
From: Ankita Garg <gargankita@gmail.com>
The default zonelist that is node ordered contains all zones from within a
node and then all zones from the next node and so on. By introducing memory
regions, the primary aim is to group memory allocations to a given area of
memory together. The modified zonelists thus contain all zones from one
region, followed by all zones from the next region and so on. This ensures
that all the memory in one region is allocated before going over to the next
region, unless targetted memory allocations are performed.
Signed-off-by: Ankita Garg <gargankita@gmail.com>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
---
mm/page_alloc.c | 69 +++++++++++++++++++++++++++++++++----------------------
1 file changed, 42 insertions(+), 27 deletions(-)
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index a8e86b5..9c1d680 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -3040,21 +3040,25 @@ static void zoneref_set_zone(struct zone *zone, struct zoneref *zoneref)
static int build_zonelists_node(pg_data_t *pgdat, struct zonelist *zonelist,
int nr_zones, enum zone_type zone_type)
{
+ enum zone_type z_type = zone_type;
+ struct mem_region *region;
struct zone *zone;
BUG_ON(zone_type >= MAX_NR_ZONES);
zone_type++;
- do {
- zone_type--;
- zone = pgdat->node_zones + zone_type;
- if (populated_zone(zone)) {
- zoneref_set_zone(zone,
- &zonelist->_zonerefs[nr_zones++]);
- check_highest_zone(zone_type);
- }
-
- } while (zone_type);
+ for_each_mem_region_in_node(region, pgdat->node_id) {
+ do {
+ zone_type--;
+ zone = region->region_zones + zone_type;
+ if (populated_zone(zone)) {
+ zoneref_set_zone(zone,
+ &zonelist->_zonerefs[nr_zones++]);
+ check_highest_zone(zone_type);
+ }
+ } while (zone_type);
+ zone_type = z_type + 1;
+ }
return nr_zones;
}
@@ -3275,17 +3279,20 @@ static void build_zonelists_in_zone_order(pg_data_t *pgdat, int nr_nodes)
int zone_type; /* needs to be signed */
struct zone *z;
struct zonelist *zonelist;
+ struct mem_region *region;
zonelist = &pgdat->node_zonelists[0];
pos = 0;
for (zone_type = MAX_NR_ZONES - 1; zone_type >= 0; zone_type--) {
for (j = 0; j < nr_nodes; j++) {
node = node_order[j];
- z = &NODE_DATA(node)->node_zones[zone_type];
- if (populated_zone(z)) {
- zoneref_set_zone(z,
- &zonelist->_zonerefs[pos++]);
- check_highest_zone(zone_type);
+ for_each_mem_region_in_node(region, node) {
+ z = ®ion->region_zones[zone_type];
+ if (populated_zone(z)) {
+ zoneref_set_zone(z,
+ &zonelist->_zonerefs[pos++]);
+ check_highest_zone(zone_type);
+ }
}
}
}
@@ -3299,6 +3306,8 @@ static int default_zonelist_order(void)
unsigned long low_kmem_size,total_size;
struct zone *z;
int average_size;
+ struct mem_region *region;
+
/*
* ZONE_DMA and ZONE_DMA32 can be very small area in the system.
* If they are really small and used heavily, the system can fall
@@ -3310,12 +3319,15 @@ static int default_zonelist_order(void)
total_size = 0;
for_each_online_node(nid) {
for (zone_type = 0; zone_type < MAX_NR_ZONES; zone_type++) {
- z = &NODE_DATA(nid)->node_zones[zone_type];
- if (populated_zone(z)) {
- if (zone_type < ZONE_NORMAL)
- low_kmem_size += z->present_pages;
- total_size += z->present_pages;
- } else if (zone_type == ZONE_NORMAL) {
+ for_each_mem_region_in_node(region, nid) {
+ z = ®ion->region_zones[zone_type];
+ if (populated_zone(z)) {
+ if (zone_type < ZONE_NORMAL)
+ low_kmem_size +=
+ z->present_pages;
+
+ total_size += z->present_pages;
+ } else if (zone_type == ZONE_NORMAL) {
/*
* If any node has only lowmem, then node order
* is preferred to allow kernel allocations
@@ -3323,7 +3335,8 @@ static int default_zonelist_order(void)
* on other nodes when there is an abundance of
* lowmem available to allocate from.
*/
- return ZONELIST_ORDER_NODE;
+ return ZONELIST_ORDER_NODE;
+ }
}
}
}
@@ -3341,11 +3354,13 @@ static int default_zonelist_order(void)
low_kmem_size = 0;
total_size = 0;
for (zone_type = 0; zone_type < MAX_NR_ZONES; zone_type++) {
- z = &NODE_DATA(nid)->node_zones[zone_type];
- if (populated_zone(z)) {
- if (zone_type < ZONE_NORMAL)
- low_kmem_size += z->present_pages;
- total_size += z->present_pages;
+ for_each_mem_region_in_node(region, nid) {
+ z = ®ion->region_zones[zone_type];
+ if (populated_zone(z)) {
+ if (zone_type < ZONE_NORMAL)
+ low_kmem_size += z->present_pages;
+ total_size += z->present_pages;
+ }
}
}
if (low_kmem_size &&
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2012-11-06 19:42 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-06 19:39 [RFC PATCH 00/10][Hierarchy] mm: Linux VM Infrastructure to support Memory Power Management Srivatsa S. Bhat
2012-11-06 19:39 ` [RFC PATCH 01/10] mm: Introduce the memory regions data structure Srivatsa S. Bhat
2012-11-06 19:40 ` [RFC PATCH 02/10] mm: Helper routines Srivatsa S. Bhat
2012-11-06 19:40 ` [RFC PATCH 03/10] mm: Init zones inside memory regions Srivatsa S. Bhat
2012-11-06 19:40 ` [RFC PATCH 04/10] mm: Refer to zones from " Srivatsa S. Bhat
2012-11-06 19:40 ` Srivatsa S. Bhat [this message]
2012-11-06 19:41 ` [RFC PATCH 06/10] mm: Verify zonelists Srivatsa S. Bhat
2012-11-06 19:41 ` [RFC PATCH 07/10] mm: Modify vmstat Srivatsa S. Bhat
2012-11-06 19:41 ` [RFC PATCH 08/10] mm: Modify vmscan Srivatsa S. Bhat
2012-11-06 19:41 ` [RFC PATCH 09/10] mm: Reflect memory region changes in zoneinfo Srivatsa S. Bhat
2012-11-06 19:42 ` [RFC PATCH 10/10] mm: Create memory regions at boot-up Srivatsa S. Bhat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121106194052.6560.36457.stgit@srivatsabhat.in.ibm.com \
--to=srivatsa.bhat@linux.vnet.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=amit.kachhap@linaro.org \
--cc=arjan@linux.intel.com \
--cc=dave@linux.vnet.ibm.com \
--cc=gargankita@gmail.com \
--cc=kamezawa.hiroyu@jp.fujitsu.com \
--cc=kmpark@infradead.org \
--cc=lenb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-pm@vger.kernel.org \
--cc=loic.pallardy@stericsson.com \
--cc=maxime.coquelin@stericsson.com \
--cc=mgorman@suse.de \
--cc=mjg59@srcf.ucam.org \
--cc=paulmck@linux.vnet.ibm.com \
--cc=rjw@sisk.pl \
--cc=santosh.shilimkar@ti.com \
--cc=svaidy@linux.vnet.ibm.com \
--cc=thomas.abraham@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).