From: Michal Hocko <mhocko@suse.cz>
To: Jianguo Wu <wujianguo@huawei.com>
Cc: tj@kernel.org, lizefan@huawei.com,
aneesh.kumar@linux.vnet.ibm.com,
Andrew Morton <akpm@linux-foundation.org>,
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>,
Liujiang <jiang.liu@huawei.com>,
dhillf@gmail.com, Jiang Liu <liuj97@gmail.com>,
qiuxishi <qiuxishi@huawei.com>, Hanjun Guo <guohanjun@huawei.com>,
linux-kernel@vger.kernel.org, linux-mm@kvack.org,
containers@lists.linux-foundation.org, cgroups@vger.kernel.org
Subject: Re: [PATCH] mm/hugetlb: create hugetlb cgroup file in hugetlb_init
Date: Wed, 12 Dec 2012 11:19:17 +0100 [thread overview]
Message-ID: <20121212101917.GD32081@dhcp22.suse.cz> (raw)
In-Reply-To: <50C83F97.3040009@huawei.com>
On Wed 12-12-12 16:25:59, Jianguo Wu wrote:
> Build kernel with CONFIG_HUGETLBFS=y,CONFIG_HUGETLB_PAGE=y
> and CONFIG_CGROUP_HUGETLB=y, then specify hugepagesz=xx boot option,
> system will boot fail.
>
> This failure is caused by following code path:
> setup_hugepagesz
> hugetlb_add_hstate
> hugetlb_cgroup_file_init
> cgroup_add_cftypes
> kzalloc <--slab is *not available* yet
>
> For this path, slab is not available yet, so memory allocated will be
> failed, and cause WARN_ON() in hugetlb_cgroup_file_init().
>
> So I move hugetlb_cgroup_file_init() into hugetlb_init().
I do not think this is a good idea. hugetlb_init is in __init section as
well so what guarantees that the slab is initialized by then? Isn't this
just a good ordering that makes this working?
Shouldn't this be rather placed in hugetlb_cgroup_create?
> Signed-off-by: Jianguo Wu <wujianguo@huawei.com>
> Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
> ---
> include/linux/hugetlb_cgroup.h | 7 ++-----
> mm/hugetlb.c | 11 +----------
> mm/hugetlb_cgroup.c | 23 +++++++++++++++++++++--
> 3 files changed, 24 insertions(+), 17 deletions(-)
>
> diff --git a/include/linux/hugetlb_cgroup.h b/include/linux/hugetlb_cgroup.h
> index d73878c..5bb9c28 100644
> --- a/include/linux/hugetlb_cgroup.h
> +++ b/include/linux/hugetlb_cgroup.h
> @@ -62,7 +62,7 @@ extern void hugetlb_cgroup_uncharge_page(int idx, unsigned long nr_pages,
> struct page *page);
> extern void hugetlb_cgroup_uncharge_cgroup(int idx, unsigned long nr_pages,
> struct hugetlb_cgroup *h_cg);
> -extern int hugetlb_cgroup_file_init(int idx) __init;
> +extern void hugetlb_cgroup_file_init(void) __init;
> extern void hugetlb_cgroup_migrate(struct page *oldhpage,
> struct page *newhpage);
>
> @@ -111,10 +111,7 @@ hugetlb_cgroup_uncharge_cgroup(int idx, unsigned long nr_pages,
> return;
> }
>
> -static inline int __init hugetlb_cgroup_file_init(int idx)
> -{
> - return 0;
> -}
> +static inline void __init hugetlb_cgroup_file_init() {}
>
> static inline void hugetlb_cgroup_migrate(struct page *oldhpage,
> struct page *newhpage)
> diff --git a/mm/hugetlb.c b/mm/hugetlb.c
> index 1ef2cd4..a30da48 100644
> --- a/mm/hugetlb.c
> +++ b/mm/hugetlb.c
> @@ -1906,14 +1906,12 @@ static int __init hugetlb_init(void)
> default_hstate.max_huge_pages = default_hstate_max_huge_pages;
>
> hugetlb_init_hstates();
> -
> gather_bootmem_prealloc();
> -
> report_hugepages();
>
> hugetlb_sysfs_init();
> -
> hugetlb_register_all_nodes();
> + hugetlb_cgroup_file_init();
>
> return 0;
> }
> @@ -1943,13 +1941,6 @@ void __init hugetlb_add_hstate(unsigned order)
> h->next_nid_to_free = first_node(node_states[N_HIGH_MEMORY]);
> snprintf(h->name, HSTATE_NAME_LEN, "hugepages-%lukB",
> huge_page_size(h)/1024);
> - /*
> - * Add cgroup control files only if the huge page consists
> - * of more than two normal pages. This is because we use
> - * page[2].lru.next for storing cgoup details.
> - */
> - if (order >= HUGETLB_CGROUP_MIN_ORDER)
> - hugetlb_cgroup_file_init(hugetlb_max_hstate - 1);
>
> parsed_hstate = h;
> }
> diff --git a/mm/hugetlb_cgroup.c b/mm/hugetlb_cgroup.c
> index a3f358f..284cb68 100644
> --- a/mm/hugetlb_cgroup.c
> +++ b/mm/hugetlb_cgroup.c
> @@ -340,7 +340,7 @@ static char *mem_fmt(char *buf, int size, unsigned long hsize)
> return buf;
> }
>
> -int __init hugetlb_cgroup_file_init(int idx)
> +static void __init __hugetlb_cgroup_file_init(int idx)
> {
> char buf[32];
> struct cftype *cft;
> @@ -382,7 +382,26 @@ int __init hugetlb_cgroup_file_init(int idx)
>
> WARN_ON(cgroup_add_cftypes(&hugetlb_subsys, h->cgroup_files));
>
> - return 0;
> + return;
> +}
> +
> +void __init hugetlb_cgroup_file_init()
> +{
> + struct hstate *h;
> + int idx;
> +
> + idx = 0;
> + for_each_hstate(h) {
> + /*
> + * Add cgroup control files only if the huge page consists
> + * of more than two normal pages. This is because we use
> + * page[2].lru.next for storing cgoup details.
> + */
> + if (h->order >= HUGETLB_CGROUP_MIN_ORDER)
> + __hugetlb_cgroup_file_init(idx);
> +
> + idx++;
> + }
> }
>
> /*
> -- 1.7.1
>
--
Michal Hocko
SUSE Labs
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2012-12-12 10:19 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-12 8:25 [PATCH] mm/hugetlb: create hugetlb cgroup file in hugetlb_init Jianguo Wu
2012-12-12 10:19 ` Michal Hocko [this message]
2012-12-12 10:44 ` Xishi Qiu
2012-12-12 11:23 ` Michal Hocko
2012-12-12 12:48 ` Michal Hocko
2012-12-13 2:51 ` Jianguo Wu
2012-12-13 5:12 ` Simon Jeons
2012-12-12 17:05 ` Aneesh Kumar K.V
2012-12-13 2:57 ` Jianguo Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121212101917.GD32081@dhcp22.suse.cz \
--to=mhocko@suse.cz \
--cc=akpm@linux-foundation.org \
--cc=aneesh.kumar@linux.vnet.ibm.com \
--cc=cgroups@vger.kernel.org \
--cc=containers@lists.linux-foundation.org \
--cc=dhillf@gmail.com \
--cc=guohanjun@huawei.com \
--cc=jiang.liu@huawei.com \
--cc=kamezawa.hiroyu@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=liuj97@gmail.com \
--cc=lizefan@huawei.com \
--cc=qiuxishi@huawei.com \
--cc=tj@kernel.org \
--cc=wujianguo@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).