From: Mel Gorman <mgorman@suse.de>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>,
Andrea Arcangeli <aarcange@redhat.com>,
Ingo Molnar <mingo@kernel.org>,
Simon Jeons <simon.jeons@gmail.com>,
Wanpeng Li <liwanp@linux.vnet.ibm.com>,
Hugh Dickins <hughd@google.com>, Linux-MM <linux-mm@kvack.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH] mm: uninline page_xchg_last_nid()
Date: Wed, 23 Jan 2013 15:23:31 +0000 [thread overview]
Message-ID: <20130123152330.GJ13304@suse.de> (raw)
In-Reply-To: <20130122144659.d512e05c.akpm@linux-foundation.org>
Andrew Morton pointed out that page_xchg_last_nid() and reset_page_last_nid()
were "getting nuttily large" and asked that it be investigated.
reset_page_last_nid() is on the page free path and it would be unfortunate
to make that path more expensive than it needs to be. Due to the internal
use of page_xchg_last_nid() it is already too expensive but fortunately,
it should also be impossible for the page->flags to be updated in parallel
when we call reset_page_last_nid(). Instead of unlining the function,
it uses a simplier implementation that assumes no parallel updates and
should now be sufficiently short for inlining.
page_xchg_last_nid() is called in paths that are already quite expensive
(splitting huge page, fault handling, migration) and it is reasonable to
uninline. There was not really a good place to place the function but
mm/mmzone.c was the closest fit IMO.
This patch saved 128 bytes of text in the vmlinux file for the kernel
configuration I used for testing automatic NUMA balancing.
Signed-off-by: Mel Gorman <mgorman@suse.de>
---
include/linux/mm.h | 21 +++++----------------
mm/mmzone.c | 20 +++++++++++++++++++-
2 files changed, 24 insertions(+), 17 deletions(-)
diff --git a/include/linux/mm.h b/include/linux/mm.h
index e25d47f..6e4468f 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -676,25 +676,14 @@ static inline int page_last_nid(struct page *page)
return (page->flags >> LAST_NID_PGSHIFT) & LAST_NID_MASK;
}
-static inline int page_xchg_last_nid(struct page *page, int nid)
-{
- unsigned long old_flags, flags;
- int last_nid;
-
- do {
- old_flags = flags = page->flags;
- last_nid = page_last_nid(page);
-
- flags &= ~(LAST_NID_MASK << LAST_NID_PGSHIFT);
- flags |= (nid & LAST_NID_MASK) << LAST_NID_PGSHIFT;
- } while (unlikely(cmpxchg(&page->flags, old_flags, flags) != old_flags));
-
- return last_nid;
-}
+extern int page_xchg_last_nid(struct page *page, int nid);
static inline void reset_page_last_nid(struct page *page)
{
- page_xchg_last_nid(page, (1 << LAST_NID_SHIFT) - 1);
+ int nid = (1 << LAST_NID_SHIFT) - 1;
+
+ page->flags &= ~(LAST_NID_MASK << LAST_NID_PGSHIFT);
+ page->flags |= (nid & LAST_NID_MASK) << LAST_NID_PGSHIFT;
}
#endif /* LAST_NID_NOT_IN_PAGE_FLAGS */
#else
diff --git a/mm/mmzone.c b/mm/mmzone.c
index 4596d81..bce796e 100644
--- a/mm/mmzone.c
+++ b/mm/mmzone.c
@@ -1,7 +1,7 @@
/*
* linux/mm/mmzone.c
*
- * management codes for pgdats and zones.
+ * management codes for pgdats, zones and page flags
*/
@@ -96,3 +96,21 @@ void lruvec_init(struct lruvec *lruvec)
for_each_lru(lru)
INIT_LIST_HEAD(&lruvec->lists[lru]);
}
+
+#if defined(CONFIG_NUMA_BALANCING) && !defined(LAST_NID_NOT_IN_PAGE_FLAGS)
+int page_xchg_last_nid(struct page *page, int nid)
+{
+ unsigned long old_flags, flags;
+ int last_nid;
+
+ do {
+ old_flags = flags = page->flags;
+ last_nid = page_last_nid(page);
+
+ flags &= ~(LAST_NID_MASK << LAST_NID_PGSHIFT);
+ flags |= (nid & LAST_NID_MASK) << LAST_NID_PGSHIFT;
+ } while (unlikely(cmpxchg(&page->flags, old_flags, flags) != old_flags));
+
+ return last_nid;
+}
+#endif
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2013-01-23 15:23 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-22 17:12 [PATCH 0/6] Follow up work on NUMA Balancing Mel Gorman
2013-01-22 17:12 ` [PATCH 1/6] mm: numa: Fix minor typo in numa_next_scan Mel Gorman
2013-01-22 17:12 ` [PATCH 2/6] mm: numa: Take THP into account when migrating pages for NUMA balancing Mel Gorman
2013-01-22 17:12 ` [PATCH 3/6] mm: numa: Handle side-effects in count_vm_numa_events() for !CONFIG_NUMA_BALANCING Mel Gorman
2013-01-22 22:40 ` Andrew Morton
2013-01-23 9:27 ` Mel Gorman
2013-01-22 17:12 ` [PATCH 4/6] mm: Move page flags layout to separate header Mel Gorman
2013-01-22 17:12 ` [PATCH 5/6] mm: Fold page->_last_nid into page->flags where possible Mel Gorman
2013-01-22 22:46 ` Andrew Morton
2013-01-23 13:17 ` Mel Gorman
2013-01-23 21:45 ` KOSAKI Motohiro
2013-01-23 13:18 ` [PATCH] mm: init: Report on last-nid information stored in page->flags Mel Gorman
2013-01-23 14:25 ` [PATCH 5/6] mm: Fold page->_last_nid into page->flags where possible Mel Gorman
2013-01-23 21:56 ` Andrew Morton
2013-01-24 10:55 ` [PATCH] mm: Rename page struct field helpers Mel Gorman
2013-01-29 4:39 ` Hugh Dickins
2013-01-30 11:58 ` Mel Gorman
2013-01-30 20:32 ` Hugh Dickins
2013-01-23 15:23 ` Mel Gorman [this message]
2013-01-22 17:12 ` [PATCH 6/6] mm: numa: Cleanup flow of transhuge page migration Mel Gorman
2013-01-27 21:20 ` Hugh Dickins
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130123152330.GJ13304@suse.de \
--to=mgorman@suse.de \
--cc=a.p.zijlstra@chello.nl \
--cc=aarcange@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=hughd@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=liwanp@linux.vnet.ibm.com \
--cc=mingo@kernel.org \
--cc=simon.jeons@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).