From: Cyrill Gorcunov <gorcunov@gmail.com>
To: Linux MM <linux-mm@kvack.org>, LKML <linux-kernel@vger.kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>,
Pavel Emelyanov <xemul@parallels.com>,
Andrew Morton <akpm@linux-foundation.org>,
Matt Mackall <mpm@selenic.com>,
Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>,
Marcelo Tosatti <mtosatti@redhat.com>,
KOSAKI Motohiro <kosaki.motohiro@gmail.com>,
Stephen Rothwell <sfr@canb.auug.org.au>
Subject: [PATCH] mm: Save soft-dirty bits on file pages
Date: Sat, 27 Jul 2013 00:18:07 +0400 [thread overview]
Message-ID: <20130726201807.GJ8661@moon> (raw)
Andy reported that if file page get reclaimed we loose soft-dirty bit
if it was there, so save _PAGE_BIT_SOFT_DIRTY bit when page address
get encoded into pte entry. Thus when #pf happens on such non-present
pte we can restore it back.
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
---
arch/x86/include/asm/pgtable-2level.h | 48 +++++++++++++++++++++++++++++++++-
arch/x86/include/asm/pgtable-3level.h | 3 ++
arch/x86/include/asm/pgtable.h | 15 ++++++++++
arch/x86/include/asm/pgtable_types.h | 4 ++
fs/proc/task_mmu.c | 2 +
mm/fremap.c | 14 +++++++--
mm/memory.c | 20 +++++++++++---
mm/rmap.c | 10 +++++--
8 files changed, 105 insertions(+), 11 deletions(-)
Index: linux-2.6.git/arch/x86/include/asm/pgtable-2level.h
===================================================================
--- linux-2.6.git.orig/arch/x86/include/asm/pgtable-2level.h
+++ linux-2.6.git/arch/x86/include/asm/pgtable-2level.h
@@ -55,9 +55,53 @@ static inline pmd_t native_pmdp_get_and_
#define native_pmdp_get_and_clear(xp) native_local_pmdp_get_and_clear(xp)
#endif
+#ifdef CONFIG_MEM_SOFT_DIRTY
+
+/*
+ * Bits _PAGE_BIT_PRESENT, _PAGE_BIT_FILE, _PAGE_BIT_SOFT_DIRTY and
+ * _PAGE_BIT_PROTNONE are taken, split up the 28 bits of offset
+ * into this range.
+ */
+#define PTE_FILE_MAX_BITS 28
+#define PTE_FILE_SHIFT1 (_PAGE_BIT_PRESENT + 1)
+#define PTE_FILE_SHIFT2 (_PAGE_BIT_FILE + 1)
+#define PTE_FILE_SHIFT3 (_PAGE_BIT_PROTNONE + 1)
+#define PTE_FILE_SHIFT4 (_PAGE_BIT_SOFT_DIRTY + 1)
+#define PTE_FILE_BITS1 (PTE_FILE_SHIFT2 - PTE_FILE_SHIFT1 - 1)
+#define PTE_FILE_BITS2 (PTE_FILE_SHIFT3 - PTE_FILE_SHIFT2 - 1)
+#define PTE_FILE_BITS3 (PTE_FILE_SHIFT4 - PTE_FILE_SHIFT3 - 1)
+
+#define pte_to_pgoff(pte) \
+ ((((pte).pte_low >> (PTE_FILE_SHIFT1)) \
+ & ((1U << PTE_FILE_BITS1) - 1))) \
+ + ((((pte).pte_low >> (PTE_FILE_SHIFT2)) \
+ & ((1U << PTE_FILE_BITS2) - 1)) \
+ << (PTE_FILE_BITS1)) \
+ + ((((pte).pte_low >> (PTE_FILE_SHIFT3)) \
+ & ((1U << PTE_FILE_BITS3) - 1)) \
+ << (PTE_FILE_BITS1 + PTE_FILE_BITS2)) \
+ + ((((pte).pte_low >> (PTE_FILE_SHIFT4))) \
+ << (PTE_FILE_BITS1 + PTE_FILE_BITS2 + PTE_FILE_BITS3))
+
+#define pgoff_to_pte(off) \
+ ((pte_t) { .pte_low = \
+ ((((off)) & ((1U << PTE_FILE_BITS1) - 1)) << PTE_FILE_SHIFT1) \
+ + ((((off) >> PTE_FILE_BITS1) \
+ & ((1U << PTE_FILE_BITS2) - 1)) \
+ << PTE_FILE_SHIFT2) \
+ + ((((off) >> (PTE_FILE_BITS1 + PTE_FILE_BITS2)) \
+ & ((1U << PTE_FILE_BITS3) - 1)) \
+ << PTE_FILE_SHIFT3) \
+ + ((((off) >> \
+ (PTE_FILE_BITS1 + PTE_FILE_BITS2 + PTE_FILE_BITS3))) \
+ << PTE_FILE_SHIFT4) \
+ + _PAGE_FILE })
+
+#else /* CONFIG_MEM_SOFT_DIRTY */
+
/*
* Bits _PAGE_BIT_PRESENT, _PAGE_BIT_FILE and _PAGE_BIT_PROTNONE are taken,
- * split up the 29 bits of offset into this range:
+ * split up the 29 bits of offset into this range.
*/
#define PTE_FILE_MAX_BITS 29
#define PTE_FILE_SHIFT1 (_PAGE_BIT_PRESENT + 1)
@@ -88,6 +132,8 @@ static inline pmd_t native_pmdp_get_and_
<< PTE_FILE_SHIFT3) \
+ _PAGE_FILE })
+#endif /* CONFIG_MEM_SOFT_DIRTY */
+
/* Encode and de-code a swap entry */
#if _PAGE_BIT_FILE < _PAGE_BIT_PROTNONE
#define SWP_TYPE_BITS (_PAGE_BIT_FILE - _PAGE_BIT_PRESENT - 1)
Index: linux-2.6.git/arch/x86/include/asm/pgtable-3level.h
===================================================================
--- linux-2.6.git.orig/arch/x86/include/asm/pgtable-3level.h
+++ linux-2.6.git/arch/x86/include/asm/pgtable-3level.h
@@ -179,6 +179,9 @@ static inline pmd_t native_pmdp_get_and_
/*
* Bits 0, 6 and 7 are taken in the low part of the pte,
* put the 32 bits of offset into the high part.
+ *
+ * For soft-dirty tracking 11 bit is taken from
+ * the low part of pte as well.
*/
#define pte_to_pgoff(pte) ((pte).pte_high)
#define pgoff_to_pte(off) \
Index: linux-2.6.git/arch/x86/include/asm/pgtable.h
===================================================================
--- linux-2.6.git.orig/arch/x86/include/asm/pgtable.h
+++ linux-2.6.git/arch/x86/include/asm/pgtable.h
@@ -329,6 +329,21 @@ static inline pte_t pte_swp_clear_soft_d
return pte_clear_flags(pte, _PAGE_SWP_SOFT_DIRTY);
}
+static inline pte_t pte_file_clear_soft_dirty(pte_t pte)
+{
+ return pte_clear_flags(pte, _PAGE_SOFT_DIRTY);
+}
+
+static inline pte_t pte_file_mksoft_dirty(pte_t pte)
+{
+ return pte_set_flags(pte, _PAGE_SOFT_DIRTY);
+}
+
+static inline int pte_file_soft_dirty(pte_t pte)
+{
+ return pte_flags(pte) & _PAGE_SOFT_DIRTY;
+}
+
/*
* Mask out unsupported bits in a present pgprot. Non-present pgprots
* can use those bits for other purposes, so leave them be.
Index: linux-2.6.git/arch/x86/include/asm/pgtable_types.h
===================================================================
--- linux-2.6.git.orig/arch/x86/include/asm/pgtable_types.h
+++ linux-2.6.git/arch/x86/include/asm/pgtable_types.h
@@ -61,8 +61,10 @@
* they do not conflict with each other.
*/
+#define _PAGE_BIT_SOFT_DIRTY _PAGE_BIT_HIDDEN
+
#ifdef CONFIG_MEM_SOFT_DIRTY
-#define _PAGE_SOFT_DIRTY (_AT(pteval_t, 1) << _PAGE_BIT_HIDDEN)
+#define _PAGE_SOFT_DIRTY (_AT(pteval_t, 1) << _PAGE_BIT_SOFT_DIRTY)
#else
#define _PAGE_SOFT_DIRTY (_AT(pteval_t, 0))
#endif
Index: linux-2.6.git/fs/proc/task_mmu.c
===================================================================
--- linux-2.6.git.orig/fs/proc/task_mmu.c
+++ linux-2.6.git/fs/proc/task_mmu.c
@@ -736,6 +736,8 @@ static inline void clear_soft_dirty(stru
ptent = pte_clear_flags(ptent, _PAGE_SOFT_DIRTY);
} else if (pte_swp_soft_dirty(ptent)) {
ptent = pte_swp_clear_soft_dirty(ptent);
+ } else if (pte_file(ptent)) {
+ ptent = pte_file_clear_soft_dirty(ptent);
}
set_pte_at(vma->vm_mm, addr, pte, ptent);
Index: linux-2.6.git/mm/fremap.c
===================================================================
--- linux-2.6.git.orig/mm/fremap.c
+++ linux-2.6.git/mm/fremap.c
@@ -57,17 +57,25 @@ static int install_file_pte(struct mm_st
unsigned long addr, unsigned long pgoff, pgprot_t prot)
{
int err = -ENOMEM;
- pte_t *pte;
+ pte_t *pte, ptfile;
spinlock_t *ptl;
pte = get_locked_pte(mm, addr, &ptl);
if (!pte)
goto out;
- if (!pte_none(*pte))
+ ptfile = pgoff_to_pte(pgoff);
+
+ if (!pte_none(*pte)) {
+#ifdef CONFIG_MEM_SOFT_DIRTY
+ if (pte_present(*pte) &&
+ pte_soft_dirty(*pte))
+ pte_file_mksoft_dirty(ptfile);
+#endif
zap_pte(mm, vma, addr, pte);
+ }
- set_pte_at(mm, addr, pte, pgoff_to_pte(pgoff));
+ set_pte_at(mm, addr, pte, ptfile);
/*
* We don't need to run update_mmu_cache() here because the "file pte"
* being installed by install_file_pte() is not a real pte - it's a
Index: linux-2.6.git/mm/memory.c
===================================================================
--- linux-2.6.git.orig/mm/memory.c
+++ linux-2.6.git/mm/memory.c
@@ -1141,9 +1141,14 @@ again:
continue;
if (unlikely(details) && details->nonlinear_vma
&& linear_page_index(details->nonlinear_vma,
- addr) != page->index)
- set_pte_at(mm, addr, pte,
- pgoff_to_pte(page->index));
+ addr) != page->index) {
+ pte_t ptfile = pgoff_to_pte(page->index);
+#ifdef CONFIG_MEM_SOFT_DIRTY
+ if (pte_soft_dirty(ptent))
+ pte_file_mksoft_dirty(ptfile);
+#endif
+ set_pte_at(mm, addr, pte, ptfile);
+ }
if (PageAnon(page))
rss[MM_ANONPAGES]--;
else {
@@ -3410,8 +3415,15 @@ static int __do_fault(struct mm_struct *
if (likely(pte_same(*page_table, orig_pte))) {
flush_icache_page(vma, page);
entry = mk_pte(page, vma->vm_page_prot);
- if (flags & FAULT_FLAG_WRITE)
+ if (flags & FAULT_FLAG_WRITE) {
entry = maybe_mkwrite(pte_mkdirty(entry), vma);
+ }
+#ifdef CONFIG_MEM_SOFT_DIRTY
+ else if (pte_file(orig_pte) &&
+ pte_file_soft_dirty(orig_pte)) {
+ pte_mksoft_dirty(entry);
+ }
+#endif
if (anon) {
inc_mm_counter_fast(mm, MM_ANONPAGES);
page_add_new_anon_rmap(page, vma, address);
Index: linux-2.6.git/mm/rmap.c
===================================================================
--- linux-2.6.git.orig/mm/rmap.c
+++ linux-2.6.git/mm/rmap.c
@@ -1407,8 +1407,14 @@ static int try_to_unmap_cluster(unsigned
pteval = ptep_clear_flush(vma, address, pte);
/* If nonlinear, store the file page offset in the pte. */
- if (page->index != linear_page_index(vma, address))
- set_pte_at(mm, address, pte, pgoff_to_pte(page->index));
+ if (page->index != linear_page_index(vma, address)) {
+ pte_t ptfile = pgoff_to_pte(page->index);
+#ifdef CONFIG_MEM_SOFT_DIRTY
+ if (pte_soft_dirty(pteval))
+ pte_file_mksoft_dirty(ptfile);
+#endif
+ set_pte_at(mm, address, pte, ptfile);
+ }
/* Move the dirty bit to the physical page now the pte is gone. */
if (pte_dirty(pteval))
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next reply other threads:[~2013-07-26 20:18 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-26 20:18 Cyrill Gorcunov [this message]
2013-07-26 20:55 ` [PATCH] mm: Save soft-dirty bits on file pages Andy Lutomirski
2013-07-26 21:18 ` Cyrill Gorcunov
2013-07-26 21:36 ` Andy Lutomirski
2013-07-27 6:25 ` Cyrill Gorcunov
2013-07-27 17:06 ` Andy Lutomirski
2013-07-27 21:01 ` Cyrill Gorcunov
2013-07-27 19:29 ` Pavel Emelyanov
2013-07-28 9:28 ` Pavel Emelyanov
2013-07-29 14:08 ` Pavel Emelyanov
2013-07-29 14:14 ` Cyrill Gorcunov
2013-07-29 14:24 ` Pavel Emelyanov
2013-07-29 14:36 ` Cyrill Gorcunov
2013-07-29 14:58 ` Aneesh Kumar K.V
2013-07-29 15:02 ` Cyrill Gorcunov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130726201807.GJ8661@moon \
--to=gorcunov@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=kosaki.motohiro@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=luto@amacapital.net \
--cc=mpm@selenic.com \
--cc=mtosatti@redhat.com \
--cc=sfr@canb.auug.org.au \
--cc=xemul@parallels.com \
--cc=xiaoguangrong@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).