From: Minchan Kim <minchan@kernel.org>
To: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org, linux-mm@kvack.org,
Dave Hansen <dave.hansen@intel.com>,
John Stultz <john.stultz@linaro.org>,
Zhang Yanfei <zhangyanfei@cn.fujitsu.com>,
Hugh Dickins <hughd@google.com>,
Johannes Weiner <hannes@cmpxchg.org>,
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>,
Mel Gorman <mgorman@suse.de>, Jason Evans <je@fb.com>
Subject: Re: [PATCH v5] mm: support madvise(MADV_FREE)
Date: Fri, 9 May 2014 15:17:14 +0900 [thread overview]
Message-ID: <20140509061714.GF25951@bbox> (raw)
In-Reply-To: <536BE351.1050005@redhat.com>
Hello Rik,
On Thu, May 08, 2014 at 04:04:33PM -0400, Rik van Riel wrote:
> On 04/20/2014 09:56 PM, Minchan Kim wrote:
>
> >In summary, MADV_FREE is about 2 time faster than MADV_DONTNEED.
>
> This is awesome.
Thanks!
>
> I have a few nitpicks with the patch, though :)
>
> >+static long madvise_lazyfree(struct vm_area_struct *vma,
> >+ struct vm_area_struct **prev,
> >+ unsigned long start, unsigned long end)
> >+{
> >+ *prev = vma;
> >+ if (vma->vm_flags & (VM_LOCKED|VM_HUGETLB|VM_PFNMAP))
> >+ return -EINVAL;
> >+
> >+ /* MADV_FREE works for only anon vma at the moment */
> >+ if (vma->vm_file)
> >+ return -EINVAL;
> >+
> >+ lazyfree_range(vma, start, end - start);
> >+ return 0;
> >+}
>
> This code checks whether lazyfree_range would work on
> the VMA...
>
> >diff --git a/mm/memory.c b/mm/memory.c
> >index c4b5bc250820..ca427f258204 100644
> >--- a/mm/memory.c
> >+++ b/mm/memory.c
> >@@ -1270,6 +1270,104 @@ static inline unsigned long zap_pud_range(struct mmu_gather *tlb,
> > return addr;
> > }
> >
> >+static unsigned long lazyfree_pte_range(struct mmu_gather *tlb,
> >+ struct vm_area_struct *vma, pmd_t *pmd,
> >+ unsigned long addr, unsigned long end)
> >+{
> >+ struct mm_struct *mm = tlb->mm;
> >+ spinlock_t *ptl;
> >+ pte_t *start_pte;
> >+ pte_t *pte;
> >+
> >+ start_pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
> >+ pte = start_pte;
> >+ arch_enter_lazy_mmu_mode();
> >+ do {
> >+ pte_t ptent = *pte;
> >+
> >+ if (pte_none(ptent))
> >+ continue;
> >+
> >+ if (!pte_present(ptent))
> >+ continue;
> >+
> >+ ptent = pte_mkold(ptent);
> >+ ptent = pte_mkclean(ptent);
> >+ set_pte_at(mm, addr, pte, ptent);
> >+ tlb_remove_tlb_entry(tlb, pte, addr);
>
> This may not work on PPC, which has a weird hash table for
> its TLB. You will find that tlb_remove_tlb_entry does
> nothing for PPC64, and set_pte_at does not remove the hash
> table entry either.
Hmm, I didn't notice that. Thanks Rik.
Maybe I need this in asm-generic.
static inline void ptep_set_lazyfree(struct mm_struct *mm, unsigned addr, pte_t *ptep)
{
pte_t ptent = *ptep;
ptent = pte_mkold(ptent);
ptent = pte_mkclean(ptent);
set_pte_at(mm, addr, ptep, ptent);
}
For arch/powerpc/include/asm/pgtable.h
static inline void ptep_set_lazyfree(struct mm_struct *mm, unsigned long addr,
pte_t *ptep)
{
pte_update(mm, addr, ptep, _PAGE_DIRTY|_PAGE_ACCESSED, 0, 0);
}
>
> >@@ -1370,6 +1485,31 @@ void unmap_vmas(struct mmu_gather *tlb,
> > }
> >
> > /**
> >+ * lazyfree_range - clear dirty bit of pte in a given range
> >+ * @vma: vm_area_struct holding the applicable pages
> >+ * @start: starting address of pages
> >+ * @size: number of bytes to do lazyfree
> >+ *
> >+ * Caller must protect the VMA list
> >+ */
> >+void lazyfree_range(struct vm_area_struct *vma, unsigned long start,
> >+ unsigned long size)
> >+{
> >+ struct mm_struct *mm = vma->vm_mm;
> >+ struct mmu_gather tlb;
> >+ unsigned long end = start + size;
> >+
> >+ lru_add_drain();
> >+ tlb_gather_mmu(&tlb, mm, start, end);
> >+ update_hiwater_rss(mm);
> >+ mmu_notifier_invalidate_range_start(mm, start, end);
> >+ for ( ; vma && vma->vm_start < end; vma = vma->vm_next)
> >+ lazyfree_single_vma(&tlb, vma, start, end);
> >+ mmu_notifier_invalidate_range_end(mm, start, end);
> >+ tlb_finish_mmu(&tlb, start, end);
> >+}
>
> This function, called by madvise_lazyfree, can iterate
> over multiple VMAs.
>
> However, madvise_lazyfree only checked one of them.
Oops, the check should have been lazyfree_range.
Will fix.
>
> What should happen when the code encounters a VMA where
> MADV_FREE does not work? Should it return an error?
> Should it skip over it?
I'd like to maintain it same as DONTNEED sematic so it could return
just EINVAL.
Thanks for the review!
--
Kind regards,
Minchan Kim
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2014-05-09 6:15 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-21 1:56 [PATCH v5] mm: support madvise(MADV_FREE) Minchan Kim
2014-05-07 23:31 ` Minchan Kim
2014-05-08 20:04 ` Rik van Riel
2014-05-09 6:17 ` Minchan Kim [this message]
2014-05-09 6:28 ` Minchan Kim
2014-05-09 15:12 ` Rik van Riel
2014-05-12 1:25 ` Minchan Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140509061714.GF25951@bbox \
--to=minchan@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=dave.hansen@intel.com \
--cc=hannes@cmpxchg.org \
--cc=hughd@google.com \
--cc=je@fb.com \
--cc=john.stultz@linaro.org \
--cc=kosaki.motohiro@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@suse.de \
--cc=riel@redhat.com \
--cc=zhangyanfei@cn.fujitsu.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).