From: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
To: Chao Yu <chao2.yu@samsung.com>
Cc: minchan@kernel.org, linux-kernel@vger.kernel.org,
linux-mm@kvack.org, ngupta@vflare.org,
'Jerome Marchand' <jmarchan@redhat.com>,
'Sergey Senozhatsky' <sergey.senozhatsky@gmail.com>,
'Andrew Morton' <akpm@linux-foundation.org>
Subject: Re: [PATCH] zram: add num_discards for discarded pages stat
Date: Fri, 15 Aug 2014 15:11:38 +0900 [thread overview]
Message-ID: <20140815061138.GA940@swordfish> (raw)
In-Reply-To: <001201cfb838$fb0ac4a0$f1204de0$@samsung.com>
On (08/15/14 11:27), Chao Yu wrote:
> Now we have supported handling discard request which is sended by filesystem,
> but no interface could be used to show information of discard.
> This patch adds num_discards to stat discarded pages, then export it to sysfs
> for displaying.
>
a side question: we account discarded pages via slot free notify in
notify_free and via req_discard in num_discards. how about accounting
both of them in num_discards? because, after all, they account a number
of discarded pages (zram_free_page()). or there any particular reason we
want to distinguish.
-ss
> Signed-off-by: Chao Yu <chao2.yu@samsung.com>
> ---
> Documentation/ABI/testing/sysfs-block-zram | 10 ++++++++++
> drivers/block/zram/zram_drv.c | 3 +++
> drivers/block/zram/zram_drv.h | 1 +
> 3 files changed, 14 insertions(+)
>
> diff --git a/Documentation/ABI/testing/sysfs-block-zram b/Documentation/ABI/testing/sysfs-block-zram
> index 70ec992..fa8936e 100644
> --- a/Documentation/ABI/testing/sysfs-block-zram
> +++ b/Documentation/ABI/testing/sysfs-block-zram
> @@ -57,6 +57,16 @@ Description:
> The failed_writes file is read-only and specifies the number of
> failed writes happened on this device.
>
> +
> +What: /sys/block/zram<id>/num_discards
> +Date: August 2014
> +Contact: Chao Yu <chao2.yu@samsung.com>
> +Description:
> + The num_discards file is read-only and specifies the number of
> + physical blocks which are discarded by this device. These blocks
> + are included in discard request which is sended by filesystem as
> + the blocks are no longer used.
> +
> What: /sys/block/zram<id>/max_comp_streams
> Date: February 2014
> Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
> diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
> index d00831c..904e7a5 100644
> --- a/drivers/block/zram/zram_drv.c
> +++ b/drivers/block/zram/zram_drv.c
> @@ -606,6 +606,7 @@ static void zram_bio_discard(struct zram *zram, u32 index,
> bit_spin_lock(ZRAM_ACCESS, &meta->table[index].value);
> zram_free_page(zram, index);
> bit_spin_unlock(ZRAM_ACCESS, &meta->table[index].value);
> + atomic64_inc(&zram->stats.num_discards);
> index++;
> n -= PAGE_SIZE;
> }
> @@ -866,6 +867,7 @@ ZRAM_ATTR_RO(num_reads);
> ZRAM_ATTR_RO(num_writes);
> ZRAM_ATTR_RO(failed_reads);
> ZRAM_ATTR_RO(failed_writes);
> +ZRAM_ATTR_RO(num_discards);
> ZRAM_ATTR_RO(invalid_io);
> ZRAM_ATTR_RO(notify_free);
> ZRAM_ATTR_RO(zero_pages);
> @@ -879,6 +881,7 @@ static struct attribute *zram_disk_attrs[] = {
> &dev_attr_num_writes.attr,
> &dev_attr_failed_reads.attr,
> &dev_attr_failed_writes.attr,
> + &dev_attr_num_discards.attr,
> &dev_attr_invalid_io.attr,
> &dev_attr_notify_free.attr,
> &dev_attr_zero_pages.attr,
> diff --git a/drivers/block/zram/zram_drv.h b/drivers/block/zram/zram_drv.h
> index e0f725c..2994aaf 100644
> --- a/drivers/block/zram/zram_drv.h
> +++ b/drivers/block/zram/zram_drv.h
> @@ -86,6 +86,7 @@ struct zram_stats {
> atomic64_t num_writes; /* --do-- */
> atomic64_t failed_reads; /* can happen when memory is too low */
> atomic64_t failed_writes; /* can happen when memory is too low */
> + atomic64_t num_discards; /* no. of discarded pages */
> atomic64_t invalid_io; /* non-page-aligned I/O requests */
> atomic64_t notify_free; /* no. of swap slot free notifications */
> atomic64_t zero_pages; /* no. of zero filled pages */
> --
> 2.0.1.474.g72c7794
>
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2014-08-15 6:12 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-15 3:27 [PATCH] zram: add num_discards for discarded pages stat Chao Yu
2014-08-15 6:11 ` Sergey Senozhatsky [this message]
2014-08-19 5:45 ` Chao Yu
2014-08-19 11:25 ` Sergey Senozhatsky
2014-08-20 2:09 ` Minchan Kim
2014-08-20 8:20 ` Chao Yu
2014-08-21 1:18 ` Minchan Kim
2014-08-21 9:09 ` Chao Yu
2014-08-21 13:05 ` Sergey Senozhatsky
2014-08-22 6:18 ` Minchan Kim
2014-08-26 2:43 ` Chao Yu
2014-08-26 12:44 ` Sergey Senozhatsky
2014-08-22 6:08 ` Minchan Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140815061138.GA940@swordfish \
--to=sergey.senozhatsky@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=chao2.yu@samsung.com \
--cc=jmarchan@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=minchan@kernel.org \
--cc=ngupta@vflare.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).