From: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
To: Mahendran Ganesh <opensource.ganesh@gmail.com>
Cc: minchan@kernel.org, ngupta@vflare.org, ddstreet@ieee.org,
sergey.senozhatsky@gmail.com, linux-mm@kvack.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/3] mm/zsmalloc: avoid unregister a NOT-registered zsmalloc zpool driver
Date: Fri, 14 Nov 2014 00:22:48 +0900 [thread overview]
Message-ID: <20141113152247.GB1408@swordfish> (raw)
In-Reply-To: <1415885857-5283-1-git-send-email-opensource.ganesh@gmail.com>
On (11/13/14 21:37), Mahendran Ganesh wrote:
> Now zsmalloc can be registered as a zpool driver into zpool when
> CONFIG_ZPOOL is enabled. During the init of zsmalloc, when error happens,
> we need to do cleanup. But in current code, it will unregister a not yet
> registered zsmalloc zpool driver(*zs_zpool_driver*).
>
> This patch puts the cleanup in zs_init() instead of calling zs_exit()
> where it will unregister a not-registered zpool driver.
>
> Signed-off-by: Mahendran Ganesh <opensource.ganesh@gmail.com>
> ---
> mm/zsmalloc.c | 12 ++++++++----
> 1 file changed, 8 insertions(+), 4 deletions(-)
>
> diff --git a/mm/zsmalloc.c b/mm/zsmalloc.c
> index 839a48c..3d2bb36 100644
> --- a/mm/zsmalloc.c
> +++ b/mm/zsmalloc.c
> @@ -907,10 +907,8 @@ static int zs_init(void)
> __register_cpu_notifier(&zs_cpu_nb);
> for_each_online_cpu(cpu) {
> ret = zs_cpu_notifier(NULL, CPU_UP_PREPARE, (void *)(long)cpu);
> - if (notifier_to_errno(ret)) {
> - cpu_notifier_register_done();
> + if (notifier_to_errno(ret))
> goto fail;
> - }
> }
>
> cpu_notifier_register_done();
> @@ -920,8 +918,14 @@ static int zs_init(void)
> #endif
>
> return 0;
> +
> fail:
> - zs_exit();
> + for_each_online_cpu(cpu)
> + zs_cpu_notifier(NULL, CPU_UP_CANCELED, (void *)(long)cpu);
> + __unregister_cpu_notifier(&zs_cpu_nb);
> +
> + cpu_notifier_register_done();
> +
> return notifier_to_errno(ret);
so we duplicate same code, and there is a bit confusing part
now: zs_cpu_notifier(CPU_UP_CANCELED) and zs_cpu_notifier(CPU_DEAD)
calls.
how about something like this?
Factor out zsmalloc cpu notifier unregistration code and call
it from both zs_exit() and zs_init() error path.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
---
mm/zsmalloc.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/mm/zsmalloc.c b/mm/zsmalloc.c
index b3b57ef..c4d2d60 100644
--- a/mm/zsmalloc.c
+++ b/mm/zsmalloc.c
@@ -881,14 +881,10 @@ static struct notifier_block zs_cpu_nb = {
.notifier_call = zs_cpu_notifier
};
-static void zs_exit(void)
+static inline void zs_unregister_cpu_notifier()
{
int cpu;
-#ifdef CONFIG_ZPOOL
- zpool_unregister_driver(&zs_zpool_driver);
-#endif
-
cpu_notifier_register_begin();
for_each_online_cpu(cpu)
@@ -898,6 +894,14 @@ static void zs_exit(void)
cpu_notifier_register_done();
}
+static void zs_exit(void)
+{
+#ifdef CONFIG_ZPOOL
+ zpool_unregister_driver(&zs_zpool_driver);
+#endif
+ zs_unregister_cpu_notifier();
+}
+
static int zs_init(void)
{
int cpu, ret;
@@ -907,10 +911,8 @@ static int zs_init(void)
__register_cpu_notifier(&zs_cpu_nb);
for_each_online_cpu(cpu) {
ret = zs_cpu_notifier(NULL, CPU_UP_PREPARE, (void *)(long)cpu);
- if (notifier_to_errno(ret)) {
- cpu_notifier_register_done();
+ if (notifier_to_errno(ret))
goto fail;
- }
}
cpu_notifier_register_done();
@@ -921,7 +923,7 @@ static int zs_init(void)
return 0;
fail:
- zs_exit();
+ zs_unregister_cpu_notifier();
return notifier_to_errno(ret);
}
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2014-11-13 15:22 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-13 13:37 [PATCH 1/3] mm/zsmalloc: avoid unregister a NOT-registered zsmalloc zpool driver Mahendran Ganesh
2014-11-13 13:37 ` [PATCH 2/3] mm/zsmalloc: add __init/__exit to zs_init/zs_exit Mahendran Ganesh
2014-11-14 12:59 ` Sergey Senozhatsky
2014-11-13 13:37 ` [PATCH 3/3] mm/zsmalloc: adjust zs_init/zs_exit location Mahendran Ganesh
2014-11-13 15:22 ` Sergey Senozhatsky [this message]
2014-11-13 15:30 ` [PATCH 1/3] mm/zsmalloc: avoid unregister a NOT-registered zsmalloc zpool driver Sergey Senozhatsky
2014-11-13 22:31 ` Sergey Senozhatsky
2014-11-13 23:29 ` Minchan Kim
2014-11-13 23:38 ` Ganesh Mahendran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141113152247.GB1408@swordfish \
--to=sergey.senozhatsky@gmail.com \
--cc=ddstreet@ieee.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=minchan@kernel.org \
--cc=ngupta@vflare.org \
--cc=opensource.ganesh@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).