From: Minchan Kim <minchan@kernel.org>
To: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org, linux-mm@kvack.org,
Dan Streetman <ddstreet@ieee.org>,
Seth Jennings <sjennings@variantweb.net>,
Nitin Gupta <ngupta@vflare.org>, Juneho Choi <juno.choi@lge.com>,
Gunho Lee <gunho.lee@lge.com>,
Luigi Semenzato <semenzato@google.com>,
Jerome Marchand <jmarchan@redhat.com>
Subject: Re: [PATCH v1 01/10] zram: avoid calling of zram_meta_free under init_lock
Date: Fri, 23 Jan 2015 10:03:36 +0900 [thread overview]
Message-ID: <20150123010336.GA18918@blaptop> (raw)
In-Reply-To: <20150121142115.GA986@swordfish>
Hello,
On Wed, Jan 21, 2015 at 11:21:53PM +0900, Sergey Senozhatsky wrote:
> On (01/21/15 15:14), Minchan Kim wrote:
> > We don't need to call zram_meta_free under init_lock.
> > What we need to prevent race is setting NULL into zram->meta
> > (ie, init_done). This patch does it.
> >
> > Signed-off-by: Minchan Kim <minchan@kernel.org>
> > ---
> > drivers/block/zram/zram_drv.c | 5 +++--
> > 1 file changed, 3 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
> > index 9250b3f..7e03d86 100644
> > --- a/drivers/block/zram/zram_drv.c
> > +++ b/drivers/block/zram/zram_drv.c
> > @@ -719,6 +719,8 @@ static void zram_reset_device(struct zram *zram, bool reset_capacity)
> > }
> >
> > meta = zram->meta;
> > + zram->meta = NULL;
> > +
> > /* Free all pages that are still in this zram device */
> > for (index = 0; index < zram->disksize >> PAGE_SHIFT; index++) {
> > unsigned long handle = meta->table[index].handle;
> > @@ -731,8 +733,6 @@ static void zram_reset_device(struct zram *zram, bool reset_capacity)
> > zcomp_destroy(zram->comp);
> > zram->max_comp_streams = 1;
> >
> > - zram_meta_free(zram->meta);
> > - zram->meta = NULL;
> > /* Reset stats */
> > memset(&zram->stats, 0, sizeof(zram->stats));
> >
> > @@ -741,6 +741,7 @@ static void zram_reset_device(struct zram *zram, bool reset_capacity)
> > set_capacity(zram->disk, 0);
> >
> > up_write(&zram->init_lock);
> > + zram_meta_free(meta);
>
> Hello,
>
> since we detached ->meta from zram, this one doesn't really need
> ->init_lock protection:
>
> /* Free all pages that are still in this zram device */
> for (index = 0; index < zram->disksize >> PAGE_SHIFT; index++) {
> unsigned long handle = meta->table[index].handle;
> if (!handle)
> continue;
>
> zs_free(meta->mem_pool, handle);
> }
>
>
> -ss
Good catch.
As well, we could move zcomp_destroy and memset(&zram->stats)
out of the lock but zram_rw_page, ZRAM_ATTR_RO, disksize_show
and orig_data_size_show have a race bug which access stats
out of the lock so that it could show the stale vaule.
Although it's not a significant, there is no reason to hesitate the fix. :)
I will fix it. Thanks!
>
> > /*
> > * Revalidate disk out of the init_lock to avoid lockdep splat.
> > --
> > 1.9.3
> >
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2015-01-23 1:03 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-21 6:14 [PATCH v1 00/10] zsmalloc compaction support Minchan Kim
2015-01-21 6:14 ` [PATCH v1 01/10] zram: avoid calling of zram_meta_free under init_lock Minchan Kim
2015-01-21 14:21 ` Sergey Senozhatsky
2015-01-23 1:03 ` Minchan Kim [this message]
2015-01-23 1:15 ` Minchan Kim
2015-01-21 6:14 ` [PATCH v1 02/10] zsmalloc: decouple handle and object Minchan Kim
2015-01-26 2:53 ` Ganesh Mahendran
2015-01-27 3:27 ` Minchan Kim
2015-01-21 6:14 ` [PATCH v1 03/10] zsmalloc: implement reverse mapping Minchan Kim
2015-01-21 6:14 ` [PATCH v1 04/10] zsmalloc: factor out obj_[malloc|free] Minchan Kim
2015-01-21 6:14 ` [PATCH v1 05/10] zsmalloc: add status bit Minchan Kim
2015-01-21 6:14 ` [PATCH v1 06/10] zsmalloc: support compaction Minchan Kim
2015-01-21 6:14 ` [PATCH v1 07/10] zsmalloc: adjust ZS_ALMOST_FULL Minchan Kim
2015-01-21 6:14 ` [PATCH v1 08/10] zram: support compaction Minchan Kim
2015-01-21 6:14 ` [PATCH v1 09/10] zsmalloc: add fullness into stat Minchan Kim
2015-01-21 6:14 ` [PATCH v1 10/10] zsmalloc: record handle in page->private for huge object Minchan Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150123010336.GA18918@blaptop \
--to=minchan@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=ddstreet@ieee.org \
--cc=gunho.lee@lge.com \
--cc=jmarchan@redhat.com \
--cc=juno.choi@lge.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=ngupta@vflare.org \
--cc=semenzato@google.com \
--cc=sergey.senozhatsky@gmail.com \
--cc=sjennings@variantweb.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).