From: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
To: Minchan Kim <minchan@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org, linux-mm@kvack.org,
Nitin Gupta <ngupta@vflare.org>,
Jerome Marchand <jmarchan@redhat.com>,
Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Subject: Re: [PATCH 1/2] zram: free meta out of init_lock
Date: Fri, 23 Jan 2015 23:24:35 +0900 [thread overview]
Message-ID: <20150123142435.GA2320@swordfish> (raw)
In-Reply-To: <1421992707-32658-1-git-send-email-minchan@kernel.org>
On (01/23/15 14:58), Minchan Kim wrote:
> We don't need to call zram_meta_free, zcomp_destroy and zs_free
> under init_lock. What we need to prevent race with init_lock
> in reset is setting NULL into zram->meta (ie, init_done).
> This patch does it.
>
> Signed-off-by: Minchan Kim <minchan@kernel.org>
> ---
> drivers/block/zram/zram_drv.c | 28 ++++++++++++++++------------
> 1 file changed, 16 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
> index 9250b3f54a8f..0299d82275e7 100644
> --- a/drivers/block/zram/zram_drv.c
> +++ b/drivers/block/zram/zram_drv.c
> @@ -708,6 +708,7 @@ static void zram_reset_device(struct zram *zram, bool reset_capacity)
> {
> size_t index;
> struct zram_meta *meta;
> + struct zcomp *comp;
>
> down_write(&zram->init_lock);
>
> @@ -719,20 +720,10 @@ static void zram_reset_device(struct zram *zram, bool reset_capacity)
> }
>
> meta = zram->meta;
> - /* Free all pages that are still in this zram device */
> - for (index = 0; index < zram->disksize >> PAGE_SHIFT; index++) {
> - unsigned long handle = meta->table[index].handle;
> - if (!handle)
> - continue;
> -
> - zs_free(meta->mem_pool, handle);
> - }
> -
> - zcomp_destroy(zram->comp);
I'm not so sure about moving zcomp destruction. if we would have detached it
from zram, then yes. otherwise, think of zram ->destoy vs ->init race.
suppose,
CPU1 waits for down_write() init lock in disksize_store() with new comp already allocated;
CPU0 detaches ->meta and releases write init lock;
CPU1 grabs the lock and does zram->comp = comp;
CPU0 reaches the point of zcomp_destroy(zram->comp);
I'd probably prefer to keep zcomp destruction on its current place. I
see a little real value in introducing zcomp detaching and moving
destruction out of init_lock.
-ss
> + comp = zram->comp;
> + zram->meta = NULL;
> zram->max_comp_streams = 1;
>
> - zram_meta_free(zram->meta);
> - zram->meta = NULL;
> /* Reset stats */
> memset(&zram->stats, 0, sizeof(zram->stats));
>
> @@ -742,6 +733,19 @@ static void zram_reset_device(struct zram *zram, bool reset_capacity)
>
> up_write(&zram->init_lock);
>
> + /* Free all pages that are still in this zram device */
> + for (index = 0; index < zram->disksize >> PAGE_SHIFT; index++) {
> + unsigned long handle = meta->table[index].handle;
> +
> + if (!handle)
> + continue;
> +
> + zs_free(meta->mem_pool, handle);
> + }
> +
> + zcomp_destroy(comp);
> + zram_meta_free(meta);
> +
> /*
> * Revalidate disk out of the init_lock to avoid lockdep splat.
> * It's okay because disk's capacity is protected by init_lock
> --
> 1.9.1
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2015-01-23 14:24 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-23 5:58 [PATCH 1/2] zram: free meta out of init_lock Minchan Kim
2015-01-23 5:58 ` [PATCH 2/2] zram: protect zram->stat race with init_lock Minchan Kim
2015-01-23 13:45 ` Jerome Marchand
2015-01-23 14:38 ` Sergey Senozhatsky
2015-01-24 13:17 ` Ganesh Mahendran
2015-01-25 14:38 ` Sergey Senozhatsky
2015-01-23 13:07 ` [PATCH 1/2] zram: free meta out of init_lock Jerome Marchand
2015-01-23 14:24 ` Sergey Senozhatsky [this message]
2015-01-23 14:48 ` Jerome Marchand
2015-01-23 15:47 ` Sergey Senozhatsky
2015-01-26 1:33 ` Minchan Kim
2015-01-26 14:17 ` Sergey Senozhatsky
2015-01-26 16:00 ` Minchan Kim
2015-01-27 2:17 ` Sergey Senozhatsky
2015-01-27 3:18 ` Minchan Kim
2015-01-27 4:03 ` Sergey Senozhatsky
2015-01-28 0:15 ` Minchan Kim
2015-01-28 0:22 ` Minchan Kim
2015-01-28 2:07 ` Sergey Senozhatsky
2015-01-28 2:57 ` Minchan Kim
2015-01-28 3:53 ` Sergey Senozhatsky
2015-01-28 4:07 ` Sergey Senozhatsky
2015-01-28 4:50 ` Sergey Senozhatsky
2015-01-28 4:58 ` Minchan Kim
2015-01-28 5:35 ` Minchan Kim
2015-01-28 6:08 ` Sergey Senozhatsky
2015-01-28 6:10 ` Sergey Senozhatsky
2015-01-28 4:55 ` Minchan Kim
2015-01-28 0:24 ` Sergey Senozhatsky
2015-01-28 0:59 ` Minchan Kim
2015-01-26 14:34 ` Jerome Marchand
2015-01-26 15:52 ` Minchan Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150123142435.GA2320@swordfish \
--to=sergey.senozhatsky@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=jmarchan@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=minchan@kernel.org \
--cc=ngupta@vflare.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).